pybind11/tests/CMakeLists.txt

235 lines
8.5 KiB
CMake
Raw Normal View History

Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# CMakeLists.txt -- Build system for the pybind11 test suite
#
# Copyright (c) 2015 Wenzel Jakob <wenzel@inf.ethz.ch>
#
# All rights reserved. Use of this source code is governed by a
# BSD-style license that can be found in the LICENSE file.
cmake_minimum_required(VERSION 2.8.12)
option(PYBIND11_WERROR "Report all warnings as errors" OFF)
if (CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_SOURCE_DIR)
# We're being loaded directly, i.e. not via add_subdirectory, so make this
# work as its own project and load the pybind11Config to get the tools we need
project(pybind11_tests)
find_package(pybind11 REQUIRED CONFIG)
endif()
if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
message(STATUS "Setting tests build type to MinSizeRel as none was specified")
set(CMAKE_BUILD_TYPE MinSizeRel CACHE STRING "Choose the type of build." FORCE)
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release"
"MinSizeRel" "RelWithDebInfo")
endif()
# Full set of test files (you can override these; see below)
set(PYBIND11_TEST_FILES
test_alias_initialization.cpp
test_buffers.cpp
test_callbacks.cpp
test_chrono.cpp
test_class_args.cpp
test_constants_and_functions.cpp
test_copy_move_policies.cpp
test_docstring_options.cpp
test_eigen.cpp
test_enum.cpp
test_eval.cpp
test_exceptions.cpp
test_inheritance.cpp
test_issues.cpp
test_keep_alive.cpp
test_kwargs_and_defaults.cpp
test_methods_and_attributes.cpp
test_modules.cpp
2016-09-20 09:52:25 +00:00
test_multiple_inheritance.cpp
test_numpy_array.cpp
test_numpy_dtypes.cpp
test_numpy_vectorize.cpp
test_opaque_types.cpp
test_operator_overloading.cpp
test_pickling.cpp
test_python_types.cpp
test_sequences_and_iterators.cpp
2016-09-20 09:52:25 +00:00
test_smart_ptr.cpp
test_stl_binders.cpp
test_virtual_functions.cpp
)
# Invoking cmake with something like:
# cmake -DPYBIND11_TEST_OVERRIDE="test_issues.cpp;test_picking.cpp" ..
# lets you override the tests that get compiled and run. You can restore to all tests with:
# cmake -DPYBIND11_TEST_OVERRIDE= ..
if (PYBIND11_TEST_OVERRIDE)
set(PYBIND11_TEST_FILES ${PYBIND11_TEST_OVERRIDE})
endif()
string(REPLACE ".cpp" ".py" PYBIND11_PYTEST_FILES "${PYBIND11_TEST_FILES}")
# Check if Eigen is available; if not, remove from PYBIND11_TEST_FILES (but
# keep it in PYBIND11_PYTEST_FILES, so that we get the "eigen is not installed"
# skip message).
list(FIND PYBIND11_TEST_FILES test_eigen.cpp PYBIND11_TEST_FILES_EIGEN_I)
if(PYBIND11_TEST_FILES_EIGEN_I GREATER -1)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Try loading via newer Eigen's Eigen3Config first (bypassing tools/FindEigen3.cmake).
# Eigen 3.3.1+ exports a cmake 3.0+ target for handling dependency requirements, but also
# produces a fatal error if loaded from a pre-3.0 cmake.
if (NOT CMAKE_VERSION VERSION_LESS 3.0)
find_package(Eigen3 QUIET CONFIG)
if (EIGEN3_FOUND)
if (EIGEN3_VERSION_STRING AND NOT EIGEN3_VERSION_STRING VERSION_LESS 3.3.1)
set(PYBIND11_EIGEN_VIA_TARGET 1)
endif()
endif()
endif()
if (NOT EIGEN3_FOUND)
# Couldn't load via target, so fall back to allowing module mode finding, which will pick up
# tools/FindEigen3.cmake
find_package(Eigen3 QUIET)
endif()
if(EIGEN3_FOUND)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Eigen 3.3.1+ cmake sets EIGEN3_VERSION_STRING (and hard codes the version when installed
# rather than looking it up in the cmake script); older versions, and the
# tools/FindEigen3.cmake, set EIGEN3_VERSION instead.
if(NOT EIGEN3_VERSION AND EIGEN3_VERSION_STRING)
set(EIGEN3_VERSION ${EIGEN3_VERSION_STRING})
endif()
message(STATUS "Building tests with Eigen v${EIGEN3_VERSION}")
else()
list(REMOVE_AT PYBIND11_TEST_FILES ${PYBIND11_TEST_FILES_EIGEN_I})
message(STATUS "Building tests WITHOUT Eigen")
endif()
endif()
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Compile with compiler warnings turned on
function(pybind11_enable_warnings target_name)
if(MSVC)
target_compile_options(${target_name} PRIVATE /W4)
else()
target_compile_options(${target_name} PRIVATE -Wall -Wextra -Wconversion -Wcast-qual)
endif()
if(PYBIND11_WERROR)
if(MSVC)
target_compile_options(${target_name} PRIVATE /WX)
else()
target_compile_options(${target_name} PRIVATE -Werror)
endif()
endif()
endfunction()
# Create the binding library
pybind11_add_module(pybind11_tests THIN_LTO pybind11_tests.cpp
${PYBIND11_TEST_FILES} ${PYBIND11_HEADERS})
pybind11_enable_warnings(pybind11_tests)
if(EIGEN3_FOUND)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
if (PYBIND11_EIGEN_VIA_TARGET)
target_link_libraries(pybind11_tests PRIVATE Eigen3::Eigen)
else()
target_include_directories(pybind11_tests PRIVATE ${EIGEN3_INCLUDE_DIR})
endif()
target_compile_definitions(pybind11_tests PRIVATE -DPYBIND11_TEST_EIGEN)
endif()
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
set(testdir ${CMAKE_CURRENT_SOURCE_DIR})
# Always write the output file directly into the 'tests' directory (even on MSVC)
if(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY)
set_target_properties(pybind11_tests PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${testdir})
foreach(config ${CMAKE_CONFIGURATION_TYPES})
string(TOUPPER ${config} config)
set_target_properties(pybind11_tests PROPERTIES LIBRARY_OUTPUT_DIRECTORY_${config} ${testdir})
endforeach()
endif()
# Make sure pytest is found or produce a fatal error
if(NOT PYBIND11_PYTEST_FOUND)
execute_process(COMMAND ${PYTHON_EXECUTABLE} -c "import pytest" OUTPUT_QUIET ERROR_QUIET
2016-10-09 18:10:49 +00:00
RESULT_VARIABLE PYBIND11_EXEC_PYTHON_ERR)
if(PYBIND11_EXEC_PYTHON_ERR)
message(FATAL_ERROR "Running the tests requires pytest. Please install it manually (try: ${PYTHON_EXECUTABLE} -m pip install pytest)")
endif()
2016-10-09 11:51:05 +00:00
set(PYBIND11_PYTEST_FOUND TRUE CACHE INTERNAL "")
endif()
# A single command to compile and run the tests
add_custom_target(pytest COMMAND ${PYTHON_EXECUTABLE} -m pytest -rws --capture=sys ${PYBIND11_PYTEST_FILES}
DEPENDS pybind11_tests WORKING_DIRECTORY ${testdir})
if(PYBIND11_TEST_OVERRIDE)
add_custom_command(TARGET pytest POST_BUILD
COMMAND ${CMAKE_COMMAND} -E echo "Note: not all tests run: -DPYBIND11_TEST_OVERRIDE is in effect")
endif()
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Add a check target to run all the tests, starting with pytest (we add dependencies to this below)
add_custom_target(check DEPENDS pytest)
# The remaining tests only apply when being built as part of the pybind11 project, but not if the
# tests are being built independently.
if (NOT PROJECT_NAME STREQUAL "pybind11")
return()
endif()
# Add a post-build comment to show the .so size and, if a previous size, compare it:
add_custom_command(TARGET pybind11_tests POST_BUILD
COMMAND ${PYTHON_EXECUTABLE} ${PROJECT_SOURCE_DIR}/tools/libsize.py
$<TARGET_FILE:pybind11_tests> ${CMAKE_CURRENT_BINARY_DIR}/sosize-$<TARGET_FILE_NAME:pybind11_tests>.txt)
# Test CMake build using functions and targets from subdirectory or installed location
add_custom_target(test_cmake_build)
if(NOT CMAKE_VERSION VERSION_LESS 3.1)
# 3.0 needed for interface library for subdirectory_target/installed_target
2016-12-13 16:02:37 +00:00
# 3.1 needed for cmake -E env for testing
include(CMakeParseArguments)
function(pybind11_add_build_test name)
cmake_parse_arguments(ARG "INSTALL" "" "" ${ARGN})
set(build_options "-DCMAKE_PREFIX_PATH=${PROJECT_BINARY_DIR}/mock_install"
"-DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}"
"-DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}"
"-DPYBIND11_CPP_STANDARD=${PYBIND11_CPP_STANDARD}")
if(NOT ARG_INSTALL)
list(APPEND build_options "-DPYBIND11_PROJECT_DIR=${PROJECT_SOURCE_DIR}")
endif()
add_custom_target(test_${name} ${CMAKE_CTEST_COMMAND}
--quiet --output-log test_cmake_build/${name}.log
--build-and-test "${CMAKE_CURRENT_SOURCE_DIR}/test_cmake_build/${name}"
"${CMAKE_CURRENT_BINARY_DIR}/test_cmake_build/${name}"
--build-config Release
--build-noclean
--build-generator ${CMAKE_GENERATOR}
$<$<BOOL:${CMAKE_GENERATOR_PLATFORM}>:--build-generator-platform> ${CMAKE_GENERATOR_PLATFORM}
--build-makeprogram ${CMAKE_MAKE_PROGRAM}
--build-target check
--build-options ${build_options}
2016-12-13 16:02:37 +00:00
)
if(ARG_INSTALL)
add_dependencies(test_${name} mock_install)
endif()
add_dependencies(test_cmake_build test_${name})
endfunction()
pybind11_add_build_test(subdirectory_function)
pybind11_add_build_test(subdirectory_target)
if(PYBIND11_INSTALL)
add_custom_target(mock_install ${CMAKE_COMMAND}
"-DCMAKE_INSTALL_PREFIX=${PROJECT_BINARY_DIR}/mock_install"
-P "${PROJECT_BINARY_DIR}/cmake_install.cmake"
2016-12-13 16:02:37 +00:00
)
pybind11_add_build_test(installed_function INSTALL)
pybind11_add_build_test(installed_target INSTALL)
2016-12-13 16:02:37 +00:00
endif()
endif()
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
add_dependencies(check test_cmake_build)