Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
# CMakeLists.txt -- Build system for the pybind11 test suite
|
|
|
|
|
#
|
|
|
|
|
# Copyright (c) 2015 Wenzel Jakob <wenzel@inf.ethz.ch>
|
|
|
|
|
#
|
|
|
|
|
# All rights reserved. Use of this source code is governed by a
|
|
|
|
|
# BSD-style license that can be found in the LICENSE file.
|
|
|
|
|
|
2020-08-19 16:26:26 +00:00
|
|
|
cmake_minimum_required(VERSION 3.4)
|
2020-07-28 04:43:12 +00:00
|
|
|
|
2020-08-19 16:26:26 +00:00
|
|
|
# The `cmake_minimum_required(VERSION 3.4...3.18)` syntax does not work with
|
2020-08-01 02:45:19 +00:00
|
|
|
# some versions of VS that have a patched CMake 3.11. This forces us to emulate
|
|
|
|
|
# the behavior using the following workaround:
|
2020-07-28 04:43:12 +00:00
|
|
|
if(${CMAKE_VERSION} VERSION_LESS 3.18)
|
2020-07-30 20:20:10 +00:00
|
|
|
cmake_policy(VERSION ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION})
|
2020-07-28 04:43:12 +00:00
|
|
|
else()
|
2020-07-30 20:20:10 +00:00
|
|
|
cmake_policy(VERSION 3.18)
|
2020-07-28 04:43:12 +00:00
|
|
|
endif()
|
|
|
|
|
|
2020-09-12 02:06:52 +00:00
|
|
|
# Only needed for CMake < 3.5 support
|
|
|
|
|
include(CMakeParseArguments)
|
|
|
|
|
|
|
|
|
|
# Filter out items; print an optional message if any items filtered
|
|
|
|
|
#
|
|
|
|
|
# Usage:
|
|
|
|
|
# pybind11_filter_tests(LISTNAME file1.cpp file2.cpp ... MESSAGE "")
|
|
|
|
|
#
|
2021-01-19 23:48:22 +00:00
|
|
|
macro(pybind11_filter_tests LISTNAME)
|
2020-09-12 02:06:52 +00:00
|
|
|
cmake_parse_arguments(ARG "" "MESSAGE" "" ${ARGN})
|
|
|
|
|
set(PYBIND11_FILTER_TESTS_FOUND OFF)
|
|
|
|
|
foreach(filename IN LISTS ARG_UNPARSED_ARGUMENTS)
|
|
|
|
|
list(FIND ${LISTNAME} ${filename} _FILE_FOUND)
|
|
|
|
|
if(_FILE_FOUND GREATER -1)
|
|
|
|
|
list(REMOVE_AT ${LISTNAME} ${_FILE_FOUND})
|
|
|
|
|
set(PYBIND11_FILTER_TESTS_FOUND ON)
|
|
|
|
|
endif()
|
|
|
|
|
endforeach()
|
|
|
|
|
if(PYBIND11_FILTER_TESTS_FOUND AND ARG_MESSAGE)
|
|
|
|
|
message(STATUS "${ARG_MESSAGE}")
|
|
|
|
|
endif()
|
|
|
|
|
endmacro()
|
|
|
|
|
|
2021-01-19 23:48:22 +00:00
|
|
|
macro(possibly_uninitialized)
|
|
|
|
|
foreach(VARNAME ${ARGN})
|
|
|
|
|
if(NOT DEFINED "${VARNAME}")
|
|
|
|
|
set("${VARNAME}" "")
|
|
|
|
|
endif()
|
|
|
|
|
endforeach()
|
|
|
|
|
endmacro()
|
|
|
|
|
|
2020-08-19 16:26:26 +00:00
|
|
|
# New Python support
|
|
|
|
|
if(DEFINED Python_EXECUTABLE)
|
|
|
|
|
set(PYTHON_EXECUTABLE "${Python_EXECUTABLE}")
|
|
|
|
|
set(PYTHON_VERSION "${Python_VERSION}")
|
|
|
|
|
endif()
|
|
|
|
|
|
2020-07-28 04:43:12 +00:00
|
|
|
# There's no harm in including a project in a project
|
|
|
|
|
project(pybind11_tests CXX)
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
|
2020-08-01 02:45:19 +00:00
|
|
|
# Access FindCatch and more
|
|
|
|
|
list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_LIST_DIR}/../tools")
|
|
|
|
|
|
2020-07-30 20:20:10 +00:00
|
|
|
option(PYBIND11_WERROR "Report all warnings as errors" OFF)
|
2020-07-28 04:43:12 +00:00
|
|
|
option(DOWNLOAD_EIGEN "Download EIGEN (requires CMake 3.11+)" OFF)
|
2020-09-10 15:49:26 +00:00
|
|
|
option(PYBIND11_CUDA_TESTS "Enable building CUDA tests (requires CMake 3.12+)" OFF)
|
2020-07-30 20:20:10 +00:00
|
|
|
set(PYBIND11_TEST_OVERRIDE
|
|
|
|
|
""
|
|
|
|
|
CACHE STRING "Tests from ;-separated list of *.cpp files will be built instead of all tests")
|
2020-09-12 02:06:52 +00:00
|
|
|
set(PYBIND11_TEST_FILTER
|
|
|
|
|
""
|
|
|
|
|
CACHE STRING "Tests from ;-separated list of *.cpp files will be removed from all tests")
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
|
2020-07-28 04:43:12 +00:00
|
|
|
if(CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_SOURCE_DIR)
|
2020-07-30 20:20:10 +00:00
|
|
|
# We're being loaded directly, i.e. not via add_subdirectory, so make this
|
|
|
|
|
# work as its own project and load the pybind11Config to get the tools we need
|
|
|
|
|
find_package(pybind11 REQUIRED CONFIG)
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
endif()
|
|
|
|
|
|
2021-01-19 23:48:22 +00:00
|
|
|
if(NOT CMAKE_BUILD_TYPE AND NOT DEFINED CMAKE_CONFIGURATION_TYPES)
|
2016-08-12 11:50:00 +00:00
|
|
|
message(STATUS "Setting tests build type to MinSizeRel as none was specified")
|
2020-07-30 20:20:10 +00:00
|
|
|
set(CMAKE_BUILD_TYPE
|
|
|
|
|
MinSizeRel
|
|
|
|
|
CACHE STRING "Choose the type of build." FORCE)
|
|
|
|
|
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release" "MinSizeRel"
|
|
|
|
|
"RelWithDebInfo")
|
2016-08-12 11:50:00 +00:00
|
|
|
endif()
|
|
|
|
|
|
2020-09-10 15:49:26 +00:00
|
|
|
if(PYBIND11_CUDA_TESTS)
|
|
|
|
|
enable_language(CUDA)
|
|
|
|
|
if(DEFINED CMAKE_CXX_STANDARD)
|
|
|
|
|
set(CMAKE_CUDA_STANDARD ${CMAKE_CXX_STANDARD})
|
|
|
|
|
endif()
|
|
|
|
|
set(CMAKE_CUDA_STANDARD_REQUIRED ON)
|
|
|
|
|
endif()
|
|
|
|
|
|
2016-11-13 00:10:53 +00:00
|
|
|
# Full set of test files (you can override these; see below)
|
2016-08-12 11:50:00 +00:00
|
|
|
set(PYBIND11_TEST_FILES
|
2020-07-30 20:20:10 +00:00
|
|
|
test_async.cpp
|
|
|
|
|
test_buffers.cpp
|
|
|
|
|
test_builtin_casters.cpp
|
|
|
|
|
test_call_policies.cpp
|
|
|
|
|
test_callbacks.cpp
|
|
|
|
|
test_chrono.cpp
|
|
|
|
|
test_class.cpp
|
Adding py::smart_holder (for smart-pointer interoperability). (#2672)
* Adding test_unique_ptr_member (for desired PyCLIF behavior).
See also: https://github.com/pybind/pybind11/issues/2583
Does not build with upstream master or
https://github.com/pybind/pybind11/pull/2047, but builds with
https://github.com/RobotLocomotion/pybind11 and almost runs:
```
Running tests in directory "/usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests":
================================================================================= test session starts =================================================================================
platform linux -- Python 3.8.5, pytest-5.4.3, py-1.9.0, pluggy-0.13.1
rootdir: /usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests, inifile: pytest.ini
collected 2 items
test_unique_ptr_member.py .F [100%]
====================================================================================== FAILURES =======================================================================================
_____________________________________________________________________________ test_pointee_and_ptr_owner ______________________________________________________________________________
def test_pointee_and_ptr_owner():
obj = m.pointee()
assert obj.get_int() == 213
m.ptr_owner(obj)
with pytest.raises(ValueError) as exc_info:
> obj.get_int()
E Failed: DID NOT RAISE <class 'ValueError'>
test_unique_ptr_member.py:17: Failed
============================================================================= 1 failed, 1 passed in 0.06s =============================================================================
```
* unique_ptr or shared_ptr return
* new test_variant_unique_shared with vptr_holder prototype
* moving prototype code to pybind11/vptr_holder.h, adding type_caster specialization to make the bindings involving unique_ptr passing compile, but load and cast implementations are missing
* disabling GitHub Actions on pull_request (for this PR)
* disabling AppVeyor (for this PR)
* TRIGGER_SEGSEV macro, annotations for GET_STACK (vptr::get), GET_INT_STACK (pointee)
* adding test_promotion_of_disowned_to_shared
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising returning and passing unique_ptr<T>, shared_ptr<T>
with unique_ptr, shared_ptr holder.
Observations:
test_holder_unique_ptr:
make_unique_pointee OK
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee Abort free(): double free detected
pass_shared_pointee RuntimeError: Unable to load a custom holder type from a default-holder instance
test_holder_shared_ptr:
make_unique_pointee Segmentation fault (#1138)
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee OK
pass_shared_pointee OK
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising casting between shared_ptr<base>, shared_ptr<derived>.
* Demonstration of Undefined Behavior in handling of shared_ptr holder.
Based on https://godbolt.org/z/4fdjaW by jorgbrown@ (thanks Jorg!).
* Additional demonstration of Undefined Behavior in handling of shared_ptr holder.
* fixing up-down mixup in comment
* Demonstration of Undefined Behavior in handling of polymorphic pointers.
(This demo does NOT involve smart pointers at all, unlike the otherwise similar test_smart_ptr_private_first_base.)
* minor test_private_first_base.cpp simplification (after discovering that this can be wrapped with Boost.Python, using boost::noncopyable)
* pybind11 equivalent of Boost.Python test similar to reproducer under #1333
* Snapshot of WIP, TODO: shared_ptr deleter with on/off switch
* Adding vptr_deleter.
* Adding from/as unique_ptr<T> and unique_ptr<T, D>.
* Adding from_shared_ptr. Some polishing.
* New tests/core/smart_holder_poc_test.cpp, using Catch2.
* Adding in vptr_deleter_guard_flag.
* Improved labeling of TEST_CASEs.
* Shuffling existing TEST_CASEs into systematic matrix.
* Implementing all [S]uccess tests.
* Implementing all [E]xception tests.
* Testing of exceptions not covered by the from-as matrix.
* Adding top-level comment.
* Converting from methods to factory functions (no functional change).
* Removing obsolete and very incomplete test (replaced by Catch2-based test).
* Removing stray file.
* Adding type_caster_bare_interface_demo.
* Adding shared_ptr<mpty>, shared_ptr<mpty const> casters.
* Adding unique_ptr<mpty>, unique_ptr<mpty const> casters.
* Pure copy of `class class_` implementation in pybind11.h (master commit 98f1bbb8004f654ba9e26717bdf5912fb899b05a).
* classh.h: renaming of class_ to classh + namespace; forking test_classh_wip from test_type_caster_bare_interface_demo.
* Hard-coding smart_holder into classh.
* Adding mpty::mtxt string member.
* Adding isinstance<mpty> in type_caster::load functions.
* Adding rvalue_ref, renaming const_value_ref to lvalue_ref & removing const.
* Retrieving smart_holder pointer in type_caster<mpty>::load, and using it cast_op operators.
* Factoring out smart_holder_type_caster_load.
* Retrieving smart_holder pointer in type_caster<std::shared_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Improved error messaging: Cannot disown nullptr (as_unique_ptr).
* Retrieving smart_holder pointer in type_caster<std::unique_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Pure `clang-format --style=file -i` change.
* Pure `clang-format --style=file -i` change, with two `clang-format off` directives.
* Fixing oversight (discovered by flake8).
* flake8 cleanup
* Systematically setting mtxt for all rtrn_mpty_* functions (preparation, the values are not actually used yet).
* static cast handle for rtrn_cptr works by simply dropping in code from type_caster_base (marked with comments).
* static cast handle for rtrn_cref works by simply dropping in code from type_caster_base (marked with comments). rtrn_mref and rtrn_mptr work via const_cast (to add const).
* static cast handle for rtrn_valu works by simply dropping in code from type_caster_base (marked with comments). rtrn_rref raises a RuntimeError, to be investigated.
* Copying type_caster_generic::cast into type_caster<mpty> as-is (preparation for handling smart pointers).
* Pure clang-format change (applied to original type_caster_generic::cast).
* Adding comment re potential use_count data race.
* static handle cast implementations for rtrn_shmp, rtrn_shcp.
* Adding MISSING comments in operator std::unique_ptr<mpty[ const]>.
* static handle cast implementations for rtrn_uqmp, rtrn_uqcp.
* Bug fix: vptr_deleter_armed_flag_ptr has to live on the heap.
See new bullet point in comment section near the top.
The variable was also renamed to reflect its function more accurately.
* Fixing bugs discovered by ASAN. The code is now ASAN, MSAN, UBSAN clean.
* Making test_type_caster_bare_interface_demo.cpp slightly more realistic, ASAN, MSAN, UBSAN clean.
* Calling deregister_instance after disowning via unique_ptr.
* Removing enable_shared_from_this stub, simplifying existing code, clang-format.
Open question, with respect to the original code:
https://github.com/pybind/pybind11/blob/76a160070b369f8d82b945c97924227e8b835c94/include/pybind11/pybind11.h#L1510
To me it looks like the exact situation marked as `std::shared_ptr<Good> gp1 = not_so_good.getptr();` here: https://en.cppreference.com/w/cpp/memory/enable_shared_from_this
The comment there is: `// undefined behavior (until C++17) and std::bad_weak_ptr thrown (since C++17)`
Does the existing code have UB pre C++17?
I'll leave handling of enable_shared_from_this for later, as the need arises.
* Cosmetical change around helper functions.
* Using type_caster_base<mpty>::src_and_type directly, removing copy. Also renaming one cast to cast_const_raw_ptr, for clarity.
* Fixing clang-format oversight.
* Using factored-out make_constructor (PR #2798), removing duplicate code.
* Inserting additional assert to ensure a returned unique_ptr is always a new Python instance.
* Adding minor comment (change to internals needed to distinguish uninitialized/disowned in error message).
* Factoring out find_existing_python_instance().
* Moving factored-out make_constructor to test_classh_wip.cpp, restoring previous version of cast.h. This is currently the most practical approach. See PR #2798 for background.
* Copying classh type_casters from test_classh_wip.cpp UNMODIFIED, as a baseline for generalizing the code.
* Using pybind11/detail/classh_type_casters.h from test_classh_wip.cpp.
* Adding & using PYBIND11_CLASSH_TYPE_CASTERS define.
* Adding test_classh_inheritance, currently failing (passes with class_).
* Removing .clang-format before git rebase master (where the file was added).
* Bringing back .clang-format, the previous rm was a bad idea.
* Folding in modified_type_caster_generic_load_impl, just enough to pass test_class_wip. test_classh_inheritance is still failing, but with a different error: [RuntimeError: Incompatible type (as_raw_ptr_unowned).]
* Minimal changes needed to pass test_classh_inheritance.
* First pass adjusting try_implicit_casts and try_load_foreign_module_local to capture loaded_v_h, but untested and guarded with pybind11_failure("Untested"). This was done mainly to determine general feasibility. Note the TODO in pybind11.h, where type_caster_generic::local_load is currently hard-coded. test_classh_wip and test_classh_inheritance still pass, as before.
* Decoupling generic_type from type_caster_generic.
* Changes and tests covering classh_type_casters try_implicit_casts.
* Minimal test covering classh_type_casters load_impl Case 2b.
* Removing stray isinstance<T>(src): it interferes with the py::module_local feature. Adding missing #includes.
* Tests for classh py::module_local() feature.
* Pure renaming of function names in test_classh_inheritance, similar to the systematic approach used in test_class_wip. NO functional changes.
* Pure renaming of function and variable names, for better generalization when convoluting with inheritance. NO functional changes.
* Adopting systematic naming scheme from test_classh_wip. NO functional changes.
* Moving const after type name, for functions that cover a systematic scheme. NO functional changes.
* Adding smart_holder_type_caster_load::loaded_as_shared_ptr, currently bypassing smart_holder shared_ptr tracking completely, but the tests pass and are sanitizer clean.
* Removing rtti_held from smart_holder. See updated comment.
* Cleaning up loaded_as_raw_ptr_unowned, loaded_as_shared_ptr.
* Factoring out convert_type and folding into loaded_as_unique_ptr.
* Folding convert_type into lvalue_ref and rvalue_ref paths. Some smart_holder_type_caster_load cleanup.
* Using unique_ptr in local_load to replace static variable. Also adding local_load_safety_guard.
* Converting test_unique_ptr_member to using classh: fully working, ASAN, MSAN, UBSAN clean.
* Removing debugging comments (GET_STACK, GET_INT_STACK). cast.h is identical to current master again, pybind11.h only has the generic_type::initialize(..., &type_caster_generic::local_load) change.
* Purging obsolete pybind11/vptr_holder.h and associated test.
* Moving several tests to github.com/rwgk/rwgk_tbx/tree/main/pybind11_tests
https://github.com/rwgk/rwgk_tbx/commit/a2c2f88174a30f5de80d7d26e0f77c7b60f5fb85
These tests are from experimenting, and for demonstrating UB in pybind11 multiple inheritance handling ("first_base"), to be fixed later.
* Adding py::smart_holder support to py::class_, purging py::classh completely.
* Renaming files in include directory, creating pybind11/smart_holder.h.
* Renaming all "classh" to "smart_holder" in pybind11/detail/smart_holder_type_casters.h.
The user-facing macro is now PYBIND11_SMART_HOLDER_TYPE_CASTERS.
* Systematically renaming tests to use "class_sh" in the name.
* Renaming test_type_caster_bare_interface_demo to test_type_caster_bare_interface.
* Renaming new tests/core subdirectory to tests/pure_cpp.
* Adding new tests to CMake config, resetting CI config.
* Changing CMake file so that test_class_sh_module_local.py actually runs.
* clang-tidy fixes.
* 32-bit compatibility.
* Reusing type_caster_base make_copy_constructor, make_move_constructor with a trick.
* CMake COMPARE NATURAL is not available with older versions.
* Adding copyright notices to new header files.
* Explicitly define copy/move constructors/assignments.
* Adding new header files to tests/extra_python_package/test_files.py.
* Adding tests/pure_cpp/CMakeLists.txt.
* Making use of the new find_existing_python_instance() function factored out with PR #2822.
* Moving define PYBIND11_SMART_HOLDER_TYPE_CASTERS(T) down in the file. NO functional changes. Preparation for follow-up work (to keep that diff smaller).
* Reintroducing py::classh, this time as a simple alias for py::class_<U, py::smart_holder>.
* Replacing detail::is_smart_holder<H> in cast.h with detail::is_smart_holder_type_caster<T>.
Moving get_local_load_function_ptr, init_instance_for_type to smart_holder_type_caster_class_hooks.
Expanding static_assert in py::type::handle_of<> to accommodate smart_holder_type_casters.
* Fixing oversight.
* Adding classu alias for class_<U, std::unique_ptr<U>>.
* Giving up on idea to use legacy init_instance only if is_base_of<type_caster_generic, type_caster<T>. There are use cases in the wild that define both a custom type_caster and class_.
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Moving up is_smart_holder_type_caster, to also use in cast_is_temporary_value_reference.
* Adding smart_holder_type_casters for unique_ptr with custom deleter. SEVERE CODE DUPLICATION. This commit is to establish a baseline for consolidating the unique_ptr code.
* Unification of unique_ptr, unique_ptr_with_deleter code in smart_holder_poc.h. Leads to more fitting error messages. Enables use of unique_ptr<T, D> smart_holder_type_casters also for unique_ptr<T>.
* Copying files as-is from branch test_unique_ptr_member (PR #2672).
* Adding comment, simplifying naming, cmake addition.
* Introducing PYBIND11_USE_SMART_HOLDER_AS_DEFAULT macro (tested only undefined; there are many errors with the macro defined).
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Fixing oversight introduced with commit 95425f13d6c14fcb6ee479b62b602dc8a605ec49.
* Setting record.default_holder correctly for PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
With this test_class.cpp builds and even mostly runs, except
`test_multiple_instances_with_same_pointer`, which segfaults because it is
using a `unique_ptr` holder but `smart_holder` `type_caster`.
Also adding `static_assert`s to generate build errors for such situations,
but guarding with `#if 0` to first pivot to test_factory_constructors.cpp.
* Fixing up cast.h and smart_holder.h after rebase.
* Removing detail/smart_holder_type_casters.h in separate commit.
* Commenting out const in def_buffer(... const). With this, test_buffers builds and runs with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT. Explanation why the const needs to be removed, or fix elsewhere, is still needed, but left for later.
* Adding test_class_sh_factory_constructors, reproducing test_factory_constructors failure. Using py::class_ in this commit, to be changed to py::classh for debugging.
* Removing include/pybind11/detail/smart_holder_type_casters.h from CMakeLists.txt, test_files.py (since it does not exist in this branch).
* Adding // DANGER ZONE reminders.
* Converting as many py::class_ to py::classh as possible, not breaking tests.
* Adding initimpl::construct() overloads, resulting in test_class_sh_factory_constructors feature parity for py::class_ and py::classh.
* Adding enable_if !is_smart_holder_type_caster to existing initimpl::construct(). With this test_factory_constructors.cpp builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Disabling shared_ptr&, shared_ptr* tests when building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT for now, pending work on smart_holder_type_caster<shared_ptr>.
* Factoring out struct and class definitions into anonymous namespace. Preparation for building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Simplifying from_unique_ptr(): typename D = std::default_delete<T> is not needed. Factoring out is_std_default_delete<T>() for consistentcy between ensure_compatible_rtti_uqp_del() and from_unique_ptr().
* Introducing PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. Using it in test_smart_ptr.cpp. With this test_smart_ptr builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT and all but one test run successfully.
* Introducing 1. type_caster_for_class_, used in PYBIND11_MAKE_OPAQUE, and 2. default_holder_type, used in stl_bind.h.
* Using __VA_ARGS__ in PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS.
* Replacing condense_for_macro with much simpler approach.
* Softening static_assert, to only check specifically that smart_holder is not mixed with type_caster_base, and unique_ptr/shared_ptr holders are not mixed with smart_holder_type_casters.
* Adding PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS in test_class.cpp (with this all but one test succeed with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT).
* Adding remaining PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. static_assert for "necessary conditions" for both types of default holder, static_assert for "strict conditions" guarded by new PYBIND11_STRICT_ASSERTS_CLASS_HOLDER_VS_TYPE_CASTER_MIX. All tests build & run as before with unique_ptr as the default holder, all tests build for smart_holder as the default holder, even with the strict static_assert.
* Introducing check_is_smart_holder_type_caster() function for runtime check, and reinterpreting record.default_holder as "uses_unique_ptr_holder". With this test_smart_ptr succeeds. (All 42 tests build, 35 tests succeed, 5 run but have some failures, 2 segfault.)
* Bug fix: Adding have_value() to smart_holder_type_caster_load. With this test_builtin_casters succeeds. (All 42 tests build, 36 tests succeed, 5 run but have some failures, 1 segfault.)
* Adding unowned_void_ptr_from_direct_conversion to modified_type_caster_generic_load_impl. This fixes the last remaining segfault (test_numpy_dtypes). New stats for all tests combined: 12 failed, 458 passed.
* Adding "Lazy allocation for unallocated values" (for old-style __init__) into load_value_and_holder. Deferring destruction of disowned holder until clear_instance, to remain inspectable for "uninitialized" or "disowned" detection. New stats for all tests combined: 5 failed, 465 passed.
* Changing std::shared_ptr pointer/reference to const pointer/reference. New stats for all tests combined: 4 failed, 466 passed.
* Adding return_value_policy::move to permissible policies for unique_ptr returns. New stats for all tests combined: 3 failed, 467 passed.
* Overlooked flake8 fixes.
* Manipulating failing ConstructorStats test to pass, to be able to run all tests with ASAN.
This version of the code is ASAN clean with unique_ptr or smart_holder as the default.
This change needs to be reverted after adopting the existing move-only-if-refcount-is-1
logic used by type_caster_base.
* Adding copy constructor and move constructor tracking to atyp. Preparation for a follow-up change in smart_holder_type_caster, to make this test sensitive to the changing behavior.
[skip ci]
* Removing `operator T&&() &&` from smart_holder_type_caster, for compatibility with the behavior of type_caster_base. Enables reverting 2 of 3 test manipulations applied under commit 249df7cbdb09817fed0ddf80f01ba5af12466820. The manipulation in test_factory_constructors.py is NOT reverted in this commit.
[skip ci]
* Fixing unfortunate editing mishap. This reverts the last remaining test manipulation in commit 249df7cbdb09817fed0ddf80f01ba5af12466820 and makes all existing unit tests pass with smart_holder as default holder.
* GitHub CI clang-tidy fixes.
* Adding messages to terse `static_assert`s, for pre-C++17 compatibility.
* Using @pytest.mark.parametrize to run each assert separately (to see all errors, not just the first).
* Systematically removing _atyp from function names, to make the test code simpler.
* Using re.match to accommodate variable number of intermediate MvCtor.
* Also removing `operator T()` from smart_holder_type_caster, to fix gcc compilation errors. The only loss is pass_rref in test_class_sh_basic.
* Systematically replacing `detail::enable_if_t<...smart_holder...>` with `typename std::enable_if<...smart_holder...>::type`. Attempt to work around MSVC 2015 issues, to be tested via GitHub CI. The idea for this change originates from this comment: https://github.com/pybind/pybind11/issues/1616#issuecomment-444536813
* Importing re before pytest after observing a PyPy CI flake when importing pytest first.
* Copying MSVC 2015 compatibility change from branch pr2672_use_smart_holder_as_default.
* Introducing is_smart_holder_type_caster_base_tag, to keep smart_holder code more disconnected.
* Working around MSVC 2015 bug.
* Expanding comment for MSVC 2015 workaround.
* Systematically changing std::enable_if back to detail::enable_if_t, effectively reverting commit 5d4b6890a337ae1bbaec4091f4195606f89a3b06.
* Removing unused smart_holder_type_caster_load::loaded_as_rvalue_ref (it was an oversight that it was not removed with commit 23036a45eb4731a06b488ec1fdf83bca677b7f67).
* Removing py::classu, because it does not seem useful enough.
* Reverting commit 63495313066119dcf7510c2ae8b468b46c12ef8f by un-commenting `const` in `def_buffer(...)`. To make this possible, `operator T const&` and `operator T const*` in `smart_holder_type_caster` need to be marked as `const` member functions.
* Adding construct() overloads for constructing smart_holder from alias unique_ptr, shared_ptr returns.
* Adding test_class_sh_factory_constructors.cpp to tests/CMakeLists.txt (fixes oversight, this should have been added long before).
* Compatibility with old clang versions (clang 3.6, 3.7 C++11).
* Cleaning up changes to existing unit tests.
* Systematically adding SMART_HOLDER_WIP tag. Removing minor UNTESTED tags (only the throw are not actually exercised, investing time there has a high cost but very little benefit).
* Splitting out smart_holder_type_casters again, into new detail/smart_holder_type_casters_inline_include.h.
* Splitting out smart_holder_init_inline_include.h.
* Adding additional new include files to CMakeLists.txt, tests/extra_python_package/test_files.py.
* clang-format cleanup of most smart_holder code.
* Adding source code comments in response to review.
* Simple micro-benchmark ("ubench") comparing runtime performance for several holders.
Tested using github.com/rwgk/pybind11_scons and Google-internal build system.
Sorry, no cmake support at the moment.
First results: https://docs.google.com/spreadsheets/d/1InapCYws2Gt-stmFf_Bwl33eOMo3aLE_gc9adveY7RU/edit#gid=0
* Breaking out number_bucket.h, adding hook for also collecting performance data for PyCLIF.
* Accounting for ubench in MANIFEST.in (simply prune, for now).
* Smarter determination of call_repetitions.
[skip ci]
* Also scaling performance data to PyCLIF.
[skip ci]
* Adding ubench/python/number_bucket.clif here for general visibility.
* Fix after rebase
* Merging detail/smart_holder_init_inline_include.h into detail/init.h.
* Renaming detail/is_smart_holder_type_caster.h -> detail/smart_holder_sfinae_hooks_only.h.
* Renaming is_smart_holder_type_caster -> type_uses_smart_holder_type_caster for clarity.
* Renaming type_caster_type_is_smart_holder_type_caster -> wrapped_type_uses_smart_holder_type_caster for clarity.
* Renaming is_smart_holder_type_caster_base_tag -> smart_holder_type_caster_base_tag for simplicity.
* Adding copyright notices and minor colateral cleanup.
* iwyu cleanup (comprehensive only for cast.h and smart_holder*.h files).
* Fixing `git rebase master` accident.
* Moving large `pragma warning` block from pybind11.h to detail/common.h.
* Fixing another `git rebase master` accident.
2021-02-24 05:50:42 +00:00
|
|
|
test_class_sh_basic.cpp
|
|
|
|
|
test_class_sh_factory_constructors.cpp
|
|
|
|
|
test_class_sh_inheritance.cpp
|
2021-03-04 01:58:42 +00:00
|
|
|
test_class_sh_trampoline_shared_ptr_cpp_arg.cpp
|
Adding py::smart_holder (for smart-pointer interoperability). (#2672)
* Adding test_unique_ptr_member (for desired PyCLIF behavior).
See also: https://github.com/pybind/pybind11/issues/2583
Does not build with upstream master or
https://github.com/pybind/pybind11/pull/2047, but builds with
https://github.com/RobotLocomotion/pybind11 and almost runs:
```
Running tests in directory "/usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests":
================================================================================= test session starts =================================================================================
platform linux -- Python 3.8.5, pytest-5.4.3, py-1.9.0, pluggy-0.13.1
rootdir: /usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests, inifile: pytest.ini
collected 2 items
test_unique_ptr_member.py .F [100%]
====================================================================================== FAILURES =======================================================================================
_____________________________________________________________________________ test_pointee_and_ptr_owner ______________________________________________________________________________
def test_pointee_and_ptr_owner():
obj = m.pointee()
assert obj.get_int() == 213
m.ptr_owner(obj)
with pytest.raises(ValueError) as exc_info:
> obj.get_int()
E Failed: DID NOT RAISE <class 'ValueError'>
test_unique_ptr_member.py:17: Failed
============================================================================= 1 failed, 1 passed in 0.06s =============================================================================
```
* unique_ptr or shared_ptr return
* new test_variant_unique_shared with vptr_holder prototype
* moving prototype code to pybind11/vptr_holder.h, adding type_caster specialization to make the bindings involving unique_ptr passing compile, but load and cast implementations are missing
* disabling GitHub Actions on pull_request (for this PR)
* disabling AppVeyor (for this PR)
* TRIGGER_SEGSEV macro, annotations for GET_STACK (vptr::get), GET_INT_STACK (pointee)
* adding test_promotion_of_disowned_to_shared
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising returning and passing unique_ptr<T>, shared_ptr<T>
with unique_ptr, shared_ptr holder.
Observations:
test_holder_unique_ptr:
make_unique_pointee OK
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee Abort free(): double free detected
pass_shared_pointee RuntimeError: Unable to load a custom holder type from a default-holder instance
test_holder_shared_ptr:
make_unique_pointee Segmentation fault (#1138)
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee OK
pass_shared_pointee OK
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising casting between shared_ptr<base>, shared_ptr<derived>.
* Demonstration of Undefined Behavior in handling of shared_ptr holder.
Based on https://godbolt.org/z/4fdjaW by jorgbrown@ (thanks Jorg!).
* Additional demonstration of Undefined Behavior in handling of shared_ptr holder.
* fixing up-down mixup in comment
* Demonstration of Undefined Behavior in handling of polymorphic pointers.
(This demo does NOT involve smart pointers at all, unlike the otherwise similar test_smart_ptr_private_first_base.)
* minor test_private_first_base.cpp simplification (after discovering that this can be wrapped with Boost.Python, using boost::noncopyable)
* pybind11 equivalent of Boost.Python test similar to reproducer under #1333
* Snapshot of WIP, TODO: shared_ptr deleter with on/off switch
* Adding vptr_deleter.
* Adding from/as unique_ptr<T> and unique_ptr<T, D>.
* Adding from_shared_ptr. Some polishing.
* New tests/core/smart_holder_poc_test.cpp, using Catch2.
* Adding in vptr_deleter_guard_flag.
* Improved labeling of TEST_CASEs.
* Shuffling existing TEST_CASEs into systematic matrix.
* Implementing all [S]uccess tests.
* Implementing all [E]xception tests.
* Testing of exceptions not covered by the from-as matrix.
* Adding top-level comment.
* Converting from methods to factory functions (no functional change).
* Removing obsolete and very incomplete test (replaced by Catch2-based test).
* Removing stray file.
* Adding type_caster_bare_interface_demo.
* Adding shared_ptr<mpty>, shared_ptr<mpty const> casters.
* Adding unique_ptr<mpty>, unique_ptr<mpty const> casters.
* Pure copy of `class class_` implementation in pybind11.h (master commit 98f1bbb8004f654ba9e26717bdf5912fb899b05a).
* classh.h: renaming of class_ to classh + namespace; forking test_classh_wip from test_type_caster_bare_interface_demo.
* Hard-coding smart_holder into classh.
* Adding mpty::mtxt string member.
* Adding isinstance<mpty> in type_caster::load functions.
* Adding rvalue_ref, renaming const_value_ref to lvalue_ref & removing const.
* Retrieving smart_holder pointer in type_caster<mpty>::load, and using it cast_op operators.
* Factoring out smart_holder_type_caster_load.
* Retrieving smart_holder pointer in type_caster<std::shared_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Improved error messaging: Cannot disown nullptr (as_unique_ptr).
* Retrieving smart_holder pointer in type_caster<std::unique_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Pure `clang-format --style=file -i` change.
* Pure `clang-format --style=file -i` change, with two `clang-format off` directives.
* Fixing oversight (discovered by flake8).
* flake8 cleanup
* Systematically setting mtxt for all rtrn_mpty_* functions (preparation, the values are not actually used yet).
* static cast handle for rtrn_cptr works by simply dropping in code from type_caster_base (marked with comments).
* static cast handle for rtrn_cref works by simply dropping in code from type_caster_base (marked with comments). rtrn_mref and rtrn_mptr work via const_cast (to add const).
* static cast handle for rtrn_valu works by simply dropping in code from type_caster_base (marked with comments). rtrn_rref raises a RuntimeError, to be investigated.
* Copying type_caster_generic::cast into type_caster<mpty> as-is (preparation for handling smart pointers).
* Pure clang-format change (applied to original type_caster_generic::cast).
* Adding comment re potential use_count data race.
* static handle cast implementations for rtrn_shmp, rtrn_shcp.
* Adding MISSING comments in operator std::unique_ptr<mpty[ const]>.
* static handle cast implementations for rtrn_uqmp, rtrn_uqcp.
* Bug fix: vptr_deleter_armed_flag_ptr has to live on the heap.
See new bullet point in comment section near the top.
The variable was also renamed to reflect its function more accurately.
* Fixing bugs discovered by ASAN. The code is now ASAN, MSAN, UBSAN clean.
* Making test_type_caster_bare_interface_demo.cpp slightly more realistic, ASAN, MSAN, UBSAN clean.
* Calling deregister_instance after disowning via unique_ptr.
* Removing enable_shared_from_this stub, simplifying existing code, clang-format.
Open question, with respect to the original code:
https://github.com/pybind/pybind11/blob/76a160070b369f8d82b945c97924227e8b835c94/include/pybind11/pybind11.h#L1510
To me it looks like the exact situation marked as `std::shared_ptr<Good> gp1 = not_so_good.getptr();` here: https://en.cppreference.com/w/cpp/memory/enable_shared_from_this
The comment there is: `// undefined behavior (until C++17) and std::bad_weak_ptr thrown (since C++17)`
Does the existing code have UB pre C++17?
I'll leave handling of enable_shared_from_this for later, as the need arises.
* Cosmetical change around helper functions.
* Using type_caster_base<mpty>::src_and_type directly, removing copy. Also renaming one cast to cast_const_raw_ptr, for clarity.
* Fixing clang-format oversight.
* Using factored-out make_constructor (PR #2798), removing duplicate code.
* Inserting additional assert to ensure a returned unique_ptr is always a new Python instance.
* Adding minor comment (change to internals needed to distinguish uninitialized/disowned in error message).
* Factoring out find_existing_python_instance().
* Moving factored-out make_constructor to test_classh_wip.cpp, restoring previous version of cast.h. This is currently the most practical approach. See PR #2798 for background.
* Copying classh type_casters from test_classh_wip.cpp UNMODIFIED, as a baseline for generalizing the code.
* Using pybind11/detail/classh_type_casters.h from test_classh_wip.cpp.
* Adding & using PYBIND11_CLASSH_TYPE_CASTERS define.
* Adding test_classh_inheritance, currently failing (passes with class_).
* Removing .clang-format before git rebase master (where the file was added).
* Bringing back .clang-format, the previous rm was a bad idea.
* Folding in modified_type_caster_generic_load_impl, just enough to pass test_class_wip. test_classh_inheritance is still failing, but with a different error: [RuntimeError: Incompatible type (as_raw_ptr_unowned).]
* Minimal changes needed to pass test_classh_inheritance.
* First pass adjusting try_implicit_casts and try_load_foreign_module_local to capture loaded_v_h, but untested and guarded with pybind11_failure("Untested"). This was done mainly to determine general feasibility. Note the TODO in pybind11.h, where type_caster_generic::local_load is currently hard-coded. test_classh_wip and test_classh_inheritance still pass, as before.
* Decoupling generic_type from type_caster_generic.
* Changes and tests covering classh_type_casters try_implicit_casts.
* Minimal test covering classh_type_casters load_impl Case 2b.
* Removing stray isinstance<T>(src): it interferes with the py::module_local feature. Adding missing #includes.
* Tests for classh py::module_local() feature.
* Pure renaming of function names in test_classh_inheritance, similar to the systematic approach used in test_class_wip. NO functional changes.
* Pure renaming of function and variable names, for better generalization when convoluting with inheritance. NO functional changes.
* Adopting systematic naming scheme from test_classh_wip. NO functional changes.
* Moving const after type name, for functions that cover a systematic scheme. NO functional changes.
* Adding smart_holder_type_caster_load::loaded_as_shared_ptr, currently bypassing smart_holder shared_ptr tracking completely, but the tests pass and are sanitizer clean.
* Removing rtti_held from smart_holder. See updated comment.
* Cleaning up loaded_as_raw_ptr_unowned, loaded_as_shared_ptr.
* Factoring out convert_type and folding into loaded_as_unique_ptr.
* Folding convert_type into lvalue_ref and rvalue_ref paths. Some smart_holder_type_caster_load cleanup.
* Using unique_ptr in local_load to replace static variable. Also adding local_load_safety_guard.
* Converting test_unique_ptr_member to using classh: fully working, ASAN, MSAN, UBSAN clean.
* Removing debugging comments (GET_STACK, GET_INT_STACK). cast.h is identical to current master again, pybind11.h only has the generic_type::initialize(..., &type_caster_generic::local_load) change.
* Purging obsolete pybind11/vptr_holder.h and associated test.
* Moving several tests to github.com/rwgk/rwgk_tbx/tree/main/pybind11_tests
https://github.com/rwgk/rwgk_tbx/commit/a2c2f88174a30f5de80d7d26e0f77c7b60f5fb85
These tests are from experimenting, and for demonstrating UB in pybind11 multiple inheritance handling ("first_base"), to be fixed later.
* Adding py::smart_holder support to py::class_, purging py::classh completely.
* Renaming files in include directory, creating pybind11/smart_holder.h.
* Renaming all "classh" to "smart_holder" in pybind11/detail/smart_holder_type_casters.h.
The user-facing macro is now PYBIND11_SMART_HOLDER_TYPE_CASTERS.
* Systematically renaming tests to use "class_sh" in the name.
* Renaming test_type_caster_bare_interface_demo to test_type_caster_bare_interface.
* Renaming new tests/core subdirectory to tests/pure_cpp.
* Adding new tests to CMake config, resetting CI config.
* Changing CMake file so that test_class_sh_module_local.py actually runs.
* clang-tidy fixes.
* 32-bit compatibility.
* Reusing type_caster_base make_copy_constructor, make_move_constructor with a trick.
* CMake COMPARE NATURAL is not available with older versions.
* Adding copyright notices to new header files.
* Explicitly define copy/move constructors/assignments.
* Adding new header files to tests/extra_python_package/test_files.py.
* Adding tests/pure_cpp/CMakeLists.txt.
* Making use of the new find_existing_python_instance() function factored out with PR #2822.
* Moving define PYBIND11_SMART_HOLDER_TYPE_CASTERS(T) down in the file. NO functional changes. Preparation for follow-up work (to keep that diff smaller).
* Reintroducing py::classh, this time as a simple alias for py::class_<U, py::smart_holder>.
* Replacing detail::is_smart_holder<H> in cast.h with detail::is_smart_holder_type_caster<T>.
Moving get_local_load_function_ptr, init_instance_for_type to smart_holder_type_caster_class_hooks.
Expanding static_assert in py::type::handle_of<> to accommodate smart_holder_type_casters.
* Fixing oversight.
* Adding classu alias for class_<U, std::unique_ptr<U>>.
* Giving up on idea to use legacy init_instance only if is_base_of<type_caster_generic, type_caster<T>. There are use cases in the wild that define both a custom type_caster and class_.
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Moving up is_smart_holder_type_caster, to also use in cast_is_temporary_value_reference.
* Adding smart_holder_type_casters for unique_ptr with custom deleter. SEVERE CODE DUPLICATION. This commit is to establish a baseline for consolidating the unique_ptr code.
* Unification of unique_ptr, unique_ptr_with_deleter code in smart_holder_poc.h. Leads to more fitting error messages. Enables use of unique_ptr<T, D> smart_holder_type_casters also for unique_ptr<T>.
* Copying files as-is from branch test_unique_ptr_member (PR #2672).
* Adding comment, simplifying naming, cmake addition.
* Introducing PYBIND11_USE_SMART_HOLDER_AS_DEFAULT macro (tested only undefined; there are many errors with the macro defined).
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Fixing oversight introduced with commit 95425f13d6c14fcb6ee479b62b602dc8a605ec49.
* Setting record.default_holder correctly for PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
With this test_class.cpp builds and even mostly runs, except
`test_multiple_instances_with_same_pointer`, which segfaults because it is
using a `unique_ptr` holder but `smart_holder` `type_caster`.
Also adding `static_assert`s to generate build errors for such situations,
but guarding with `#if 0` to first pivot to test_factory_constructors.cpp.
* Fixing up cast.h and smart_holder.h after rebase.
* Removing detail/smart_holder_type_casters.h in separate commit.
* Commenting out const in def_buffer(... const). With this, test_buffers builds and runs with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT. Explanation why the const needs to be removed, or fix elsewhere, is still needed, but left for later.
* Adding test_class_sh_factory_constructors, reproducing test_factory_constructors failure. Using py::class_ in this commit, to be changed to py::classh for debugging.
* Removing include/pybind11/detail/smart_holder_type_casters.h from CMakeLists.txt, test_files.py (since it does not exist in this branch).
* Adding // DANGER ZONE reminders.
* Converting as many py::class_ to py::classh as possible, not breaking tests.
* Adding initimpl::construct() overloads, resulting in test_class_sh_factory_constructors feature parity for py::class_ and py::classh.
* Adding enable_if !is_smart_holder_type_caster to existing initimpl::construct(). With this test_factory_constructors.cpp builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Disabling shared_ptr&, shared_ptr* tests when building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT for now, pending work on smart_holder_type_caster<shared_ptr>.
* Factoring out struct and class definitions into anonymous namespace. Preparation for building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Simplifying from_unique_ptr(): typename D = std::default_delete<T> is not needed. Factoring out is_std_default_delete<T>() for consistentcy between ensure_compatible_rtti_uqp_del() and from_unique_ptr().
* Introducing PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. Using it in test_smart_ptr.cpp. With this test_smart_ptr builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT and all but one test run successfully.
* Introducing 1. type_caster_for_class_, used in PYBIND11_MAKE_OPAQUE, and 2. default_holder_type, used in stl_bind.h.
* Using __VA_ARGS__ in PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS.
* Replacing condense_for_macro with much simpler approach.
* Softening static_assert, to only check specifically that smart_holder is not mixed with type_caster_base, and unique_ptr/shared_ptr holders are not mixed with smart_holder_type_casters.
* Adding PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS in test_class.cpp (with this all but one test succeed with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT).
* Adding remaining PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. static_assert for "necessary conditions" for both types of default holder, static_assert for "strict conditions" guarded by new PYBIND11_STRICT_ASSERTS_CLASS_HOLDER_VS_TYPE_CASTER_MIX. All tests build & run as before with unique_ptr as the default holder, all tests build for smart_holder as the default holder, even with the strict static_assert.
* Introducing check_is_smart_holder_type_caster() function for runtime check, and reinterpreting record.default_holder as "uses_unique_ptr_holder". With this test_smart_ptr succeeds. (All 42 tests build, 35 tests succeed, 5 run but have some failures, 2 segfault.)
* Bug fix: Adding have_value() to smart_holder_type_caster_load. With this test_builtin_casters succeeds. (All 42 tests build, 36 tests succeed, 5 run but have some failures, 1 segfault.)
* Adding unowned_void_ptr_from_direct_conversion to modified_type_caster_generic_load_impl. This fixes the last remaining segfault (test_numpy_dtypes). New stats for all tests combined: 12 failed, 458 passed.
* Adding "Lazy allocation for unallocated values" (for old-style __init__) into load_value_and_holder. Deferring destruction of disowned holder until clear_instance, to remain inspectable for "uninitialized" or "disowned" detection. New stats for all tests combined: 5 failed, 465 passed.
* Changing std::shared_ptr pointer/reference to const pointer/reference. New stats for all tests combined: 4 failed, 466 passed.
* Adding return_value_policy::move to permissible policies for unique_ptr returns. New stats for all tests combined: 3 failed, 467 passed.
* Overlooked flake8 fixes.
* Manipulating failing ConstructorStats test to pass, to be able to run all tests with ASAN.
This version of the code is ASAN clean with unique_ptr or smart_holder as the default.
This change needs to be reverted after adopting the existing move-only-if-refcount-is-1
logic used by type_caster_base.
* Adding copy constructor and move constructor tracking to atyp. Preparation for a follow-up change in smart_holder_type_caster, to make this test sensitive to the changing behavior.
[skip ci]
* Removing `operator T&&() &&` from smart_holder_type_caster, for compatibility with the behavior of type_caster_base. Enables reverting 2 of 3 test manipulations applied under commit 249df7cbdb09817fed0ddf80f01ba5af12466820. The manipulation in test_factory_constructors.py is NOT reverted in this commit.
[skip ci]
* Fixing unfortunate editing mishap. This reverts the last remaining test manipulation in commit 249df7cbdb09817fed0ddf80f01ba5af12466820 and makes all existing unit tests pass with smart_holder as default holder.
* GitHub CI clang-tidy fixes.
* Adding messages to terse `static_assert`s, for pre-C++17 compatibility.
* Using @pytest.mark.parametrize to run each assert separately (to see all errors, not just the first).
* Systematically removing _atyp from function names, to make the test code simpler.
* Using re.match to accommodate variable number of intermediate MvCtor.
* Also removing `operator T()` from smart_holder_type_caster, to fix gcc compilation errors. The only loss is pass_rref in test_class_sh_basic.
* Systematically replacing `detail::enable_if_t<...smart_holder...>` with `typename std::enable_if<...smart_holder...>::type`. Attempt to work around MSVC 2015 issues, to be tested via GitHub CI. The idea for this change originates from this comment: https://github.com/pybind/pybind11/issues/1616#issuecomment-444536813
* Importing re before pytest after observing a PyPy CI flake when importing pytest first.
* Copying MSVC 2015 compatibility change from branch pr2672_use_smart_holder_as_default.
* Introducing is_smart_holder_type_caster_base_tag, to keep smart_holder code more disconnected.
* Working around MSVC 2015 bug.
* Expanding comment for MSVC 2015 workaround.
* Systematically changing std::enable_if back to detail::enable_if_t, effectively reverting commit 5d4b6890a337ae1bbaec4091f4195606f89a3b06.
* Removing unused smart_holder_type_caster_load::loaded_as_rvalue_ref (it was an oversight that it was not removed with commit 23036a45eb4731a06b488ec1fdf83bca677b7f67).
* Removing py::classu, because it does not seem useful enough.
* Reverting commit 63495313066119dcf7510c2ae8b468b46c12ef8f by un-commenting `const` in `def_buffer(...)`. To make this possible, `operator T const&` and `operator T const*` in `smart_holder_type_caster` need to be marked as `const` member functions.
* Adding construct() overloads for constructing smart_holder from alias unique_ptr, shared_ptr returns.
* Adding test_class_sh_factory_constructors.cpp to tests/CMakeLists.txt (fixes oversight, this should have been added long before).
* Compatibility with old clang versions (clang 3.6, 3.7 C++11).
* Cleaning up changes to existing unit tests.
* Systematically adding SMART_HOLDER_WIP tag. Removing minor UNTESTED tags (only the throw are not actually exercised, investing time there has a high cost but very little benefit).
* Splitting out smart_holder_type_casters again, into new detail/smart_holder_type_casters_inline_include.h.
* Splitting out smart_holder_init_inline_include.h.
* Adding additional new include files to CMakeLists.txt, tests/extra_python_package/test_files.py.
* clang-format cleanup of most smart_holder code.
* Adding source code comments in response to review.
* Simple micro-benchmark ("ubench") comparing runtime performance for several holders.
Tested using github.com/rwgk/pybind11_scons and Google-internal build system.
Sorry, no cmake support at the moment.
First results: https://docs.google.com/spreadsheets/d/1InapCYws2Gt-stmFf_Bwl33eOMo3aLE_gc9adveY7RU/edit#gid=0
* Breaking out number_bucket.h, adding hook for also collecting performance data for PyCLIF.
* Accounting for ubench in MANIFEST.in (simply prune, for now).
* Smarter determination of call_repetitions.
[skip ci]
* Also scaling performance data to PyCLIF.
[skip ci]
* Adding ubench/python/number_bucket.clif here for general visibility.
* Fix after rebase
* Merging detail/smart_holder_init_inline_include.h into detail/init.h.
* Renaming detail/is_smart_holder_type_caster.h -> detail/smart_holder_sfinae_hooks_only.h.
* Renaming is_smart_holder_type_caster -> type_uses_smart_holder_type_caster for clarity.
* Renaming type_caster_type_is_smart_holder_type_caster -> wrapped_type_uses_smart_holder_type_caster for clarity.
* Renaming is_smart_holder_type_caster_base_tag -> smart_holder_type_caster_base_tag for simplicity.
* Adding copyright notices and minor colateral cleanup.
* iwyu cleanup (comprehensive only for cast.h and smart_holder*.h files).
* Fixing `git rebase master` accident.
* Moving large `pragma warning` block from pybind11.h to detail/common.h.
* Fixing another `git rebase master` accident.
2021-02-24 05:50:42 +00:00
|
|
|
test_class_sh_unique_ptr_member.cpp
|
2021-03-19 19:18:39 +00:00
|
|
|
test_class_sh_virtual_py_cpp_mix.cpp
|
2021-03-04 01:58:42 +00:00
|
|
|
test_class_sh_with_alias.cpp
|
2020-07-30 20:20:10 +00:00
|
|
|
test_constants_and_functions.cpp
|
|
|
|
|
test_copy_move.cpp
|
|
|
|
|
test_custom_type_casters.cpp
|
|
|
|
|
test_docstring_options.cpp
|
|
|
|
|
test_eigen.cpp
|
|
|
|
|
test_enum.cpp
|
|
|
|
|
test_eval.cpp
|
|
|
|
|
test_exceptions.cpp
|
|
|
|
|
test_factory_constructors.cpp
|
|
|
|
|
test_gil_scoped.cpp
|
|
|
|
|
test_iostream.cpp
|
|
|
|
|
test_kwargs_and_defaults.cpp
|
|
|
|
|
test_local_bindings.cpp
|
|
|
|
|
test_methods_and_attributes.cpp
|
|
|
|
|
test_modules.cpp
|
|
|
|
|
test_multiple_inheritance.cpp
|
|
|
|
|
test_numpy_array.cpp
|
|
|
|
|
test_numpy_dtypes.cpp
|
|
|
|
|
test_numpy_vectorize.cpp
|
|
|
|
|
test_opaque_types.cpp
|
|
|
|
|
test_operator_overloading.cpp
|
|
|
|
|
test_pickling.cpp
|
|
|
|
|
test_pytypes.cpp
|
|
|
|
|
test_sequences_and_iterators.cpp
|
|
|
|
|
test_smart_ptr.cpp
|
|
|
|
|
test_stl.cpp
|
|
|
|
|
test_stl_binders.cpp
|
|
|
|
|
test_tagbased_polymorphic.cpp
|
|
|
|
|
test_union.cpp
|
|
|
|
|
test_virtual_functions.cpp)
|
2016-08-12 11:50:00 +00:00
|
|
|
|
2016-11-13 00:10:53 +00:00
|
|
|
# Invoking cmake with something like:
|
2020-08-17 14:14:23 +00:00
|
|
|
# cmake -DPYBIND11_TEST_OVERRIDE="test_callbacks.cpp;test_pickling.cpp" ..
|
2016-11-13 00:10:53 +00:00
|
|
|
# lets you override the tests that get compiled and run. You can restore to all tests with:
|
|
|
|
|
# cmake -DPYBIND11_TEST_OVERRIDE= ..
|
2020-07-30 20:20:10 +00:00
|
|
|
if(PYBIND11_TEST_OVERRIDE)
|
2016-11-13 00:10:53 +00:00
|
|
|
set(PYBIND11_TEST_FILES ${PYBIND11_TEST_OVERRIDE})
|
|
|
|
|
endif()
|
|
|
|
|
|
2020-09-12 02:06:52 +00:00
|
|
|
# You can also filter tests:
|
|
|
|
|
if(PYBIND11_TEST_FILTER)
|
|
|
|
|
pybind11_filter_tests(PYBIND11_TEST_FILES ${PYBIND11_TEST_FILTER})
|
|
|
|
|
endif()
|
|
|
|
|
|
|
|
|
|
if(PYTHON_VERSION VERSION_LESS 3.5)
|
|
|
|
|
pybind11_filter_tests(PYBIND11_TEST_FILES test_async.cpp MESSAGE
|
|
|
|
|
"Skipping test_async on Python 2")
|
2019-07-18 07:02:35 +00:00
|
|
|
endif()
|
|
|
|
|
|
2020-09-10 15:49:26 +00:00
|
|
|
# Skip tests for CUDA check:
|
|
|
|
|
# /pybind11/tests/test_constants_and_functions.cpp(125):
|
|
|
|
|
# error: incompatible exception specifications
|
2020-09-12 02:06:52 +00:00
|
|
|
if(PYBIND11_CUDA_TESTS)
|
|
|
|
|
pybind11_filter_tests(
|
|
|
|
|
PYBIND11_TEST_FILES test_constants_and_functions.cpp MESSAGE
|
|
|
|
|
"Skipping test_constants_and_functions due to incompatible exception specifications")
|
2020-09-10 15:49:26 +00:00
|
|
|
endif()
|
|
|
|
|
|
2016-09-03 18:54:22 +00:00
|
|
|
string(REPLACE ".cpp" ".py" PYBIND11_PYTEST_FILES "${PYBIND11_TEST_FILES}")
|
Adding py::smart_holder (for smart-pointer interoperability). (#2672)
* Adding test_unique_ptr_member (for desired PyCLIF behavior).
See also: https://github.com/pybind/pybind11/issues/2583
Does not build with upstream master or
https://github.com/pybind/pybind11/pull/2047, but builds with
https://github.com/RobotLocomotion/pybind11 and almost runs:
```
Running tests in directory "/usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests":
================================================================================= test session starts =================================================================================
platform linux -- Python 3.8.5, pytest-5.4.3, py-1.9.0, pluggy-0.13.1
rootdir: /usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests, inifile: pytest.ini
collected 2 items
test_unique_ptr_member.py .F [100%]
====================================================================================== FAILURES =======================================================================================
_____________________________________________________________________________ test_pointee_and_ptr_owner ______________________________________________________________________________
def test_pointee_and_ptr_owner():
obj = m.pointee()
assert obj.get_int() == 213
m.ptr_owner(obj)
with pytest.raises(ValueError) as exc_info:
> obj.get_int()
E Failed: DID NOT RAISE <class 'ValueError'>
test_unique_ptr_member.py:17: Failed
============================================================================= 1 failed, 1 passed in 0.06s =============================================================================
```
* unique_ptr or shared_ptr return
* new test_variant_unique_shared with vptr_holder prototype
* moving prototype code to pybind11/vptr_holder.h, adding type_caster specialization to make the bindings involving unique_ptr passing compile, but load and cast implementations are missing
* disabling GitHub Actions on pull_request (for this PR)
* disabling AppVeyor (for this PR)
* TRIGGER_SEGSEV macro, annotations for GET_STACK (vptr::get), GET_INT_STACK (pointee)
* adding test_promotion_of_disowned_to_shared
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising returning and passing unique_ptr<T>, shared_ptr<T>
with unique_ptr, shared_ptr holder.
Observations:
test_holder_unique_ptr:
make_unique_pointee OK
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee Abort free(): double free detected
pass_shared_pointee RuntimeError: Unable to load a custom holder type from a default-holder instance
test_holder_shared_ptr:
make_unique_pointee Segmentation fault (#1138)
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee OK
pass_shared_pointee OK
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising casting between shared_ptr<base>, shared_ptr<derived>.
* Demonstration of Undefined Behavior in handling of shared_ptr holder.
Based on https://godbolt.org/z/4fdjaW by jorgbrown@ (thanks Jorg!).
* Additional demonstration of Undefined Behavior in handling of shared_ptr holder.
* fixing up-down mixup in comment
* Demonstration of Undefined Behavior in handling of polymorphic pointers.
(This demo does NOT involve smart pointers at all, unlike the otherwise similar test_smart_ptr_private_first_base.)
* minor test_private_first_base.cpp simplification (after discovering that this can be wrapped with Boost.Python, using boost::noncopyable)
* pybind11 equivalent of Boost.Python test similar to reproducer under #1333
* Snapshot of WIP, TODO: shared_ptr deleter with on/off switch
* Adding vptr_deleter.
* Adding from/as unique_ptr<T> and unique_ptr<T, D>.
* Adding from_shared_ptr. Some polishing.
* New tests/core/smart_holder_poc_test.cpp, using Catch2.
* Adding in vptr_deleter_guard_flag.
* Improved labeling of TEST_CASEs.
* Shuffling existing TEST_CASEs into systematic matrix.
* Implementing all [S]uccess tests.
* Implementing all [E]xception tests.
* Testing of exceptions not covered by the from-as matrix.
* Adding top-level comment.
* Converting from methods to factory functions (no functional change).
* Removing obsolete and very incomplete test (replaced by Catch2-based test).
* Removing stray file.
* Adding type_caster_bare_interface_demo.
* Adding shared_ptr<mpty>, shared_ptr<mpty const> casters.
* Adding unique_ptr<mpty>, unique_ptr<mpty const> casters.
* Pure copy of `class class_` implementation in pybind11.h (master commit 98f1bbb8004f654ba9e26717bdf5912fb899b05a).
* classh.h: renaming of class_ to classh + namespace; forking test_classh_wip from test_type_caster_bare_interface_demo.
* Hard-coding smart_holder into classh.
* Adding mpty::mtxt string member.
* Adding isinstance<mpty> in type_caster::load functions.
* Adding rvalue_ref, renaming const_value_ref to lvalue_ref & removing const.
* Retrieving smart_holder pointer in type_caster<mpty>::load, and using it cast_op operators.
* Factoring out smart_holder_type_caster_load.
* Retrieving smart_holder pointer in type_caster<std::shared_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Improved error messaging: Cannot disown nullptr (as_unique_ptr).
* Retrieving smart_holder pointer in type_caster<std::unique_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Pure `clang-format --style=file -i` change.
* Pure `clang-format --style=file -i` change, with two `clang-format off` directives.
* Fixing oversight (discovered by flake8).
* flake8 cleanup
* Systematically setting mtxt for all rtrn_mpty_* functions (preparation, the values are not actually used yet).
* static cast handle for rtrn_cptr works by simply dropping in code from type_caster_base (marked with comments).
* static cast handle for rtrn_cref works by simply dropping in code from type_caster_base (marked with comments). rtrn_mref and rtrn_mptr work via const_cast (to add const).
* static cast handle for rtrn_valu works by simply dropping in code from type_caster_base (marked with comments). rtrn_rref raises a RuntimeError, to be investigated.
* Copying type_caster_generic::cast into type_caster<mpty> as-is (preparation for handling smart pointers).
* Pure clang-format change (applied to original type_caster_generic::cast).
* Adding comment re potential use_count data race.
* static handle cast implementations for rtrn_shmp, rtrn_shcp.
* Adding MISSING comments in operator std::unique_ptr<mpty[ const]>.
* static handle cast implementations for rtrn_uqmp, rtrn_uqcp.
* Bug fix: vptr_deleter_armed_flag_ptr has to live on the heap.
See new bullet point in comment section near the top.
The variable was also renamed to reflect its function more accurately.
* Fixing bugs discovered by ASAN. The code is now ASAN, MSAN, UBSAN clean.
* Making test_type_caster_bare_interface_demo.cpp slightly more realistic, ASAN, MSAN, UBSAN clean.
* Calling deregister_instance after disowning via unique_ptr.
* Removing enable_shared_from_this stub, simplifying existing code, clang-format.
Open question, with respect to the original code:
https://github.com/pybind/pybind11/blob/76a160070b369f8d82b945c97924227e8b835c94/include/pybind11/pybind11.h#L1510
To me it looks like the exact situation marked as `std::shared_ptr<Good> gp1 = not_so_good.getptr();` here: https://en.cppreference.com/w/cpp/memory/enable_shared_from_this
The comment there is: `// undefined behavior (until C++17) and std::bad_weak_ptr thrown (since C++17)`
Does the existing code have UB pre C++17?
I'll leave handling of enable_shared_from_this for later, as the need arises.
* Cosmetical change around helper functions.
* Using type_caster_base<mpty>::src_and_type directly, removing copy. Also renaming one cast to cast_const_raw_ptr, for clarity.
* Fixing clang-format oversight.
* Using factored-out make_constructor (PR #2798), removing duplicate code.
* Inserting additional assert to ensure a returned unique_ptr is always a new Python instance.
* Adding minor comment (change to internals needed to distinguish uninitialized/disowned in error message).
* Factoring out find_existing_python_instance().
* Moving factored-out make_constructor to test_classh_wip.cpp, restoring previous version of cast.h. This is currently the most practical approach. See PR #2798 for background.
* Copying classh type_casters from test_classh_wip.cpp UNMODIFIED, as a baseline for generalizing the code.
* Using pybind11/detail/classh_type_casters.h from test_classh_wip.cpp.
* Adding & using PYBIND11_CLASSH_TYPE_CASTERS define.
* Adding test_classh_inheritance, currently failing (passes with class_).
* Removing .clang-format before git rebase master (where the file was added).
* Bringing back .clang-format, the previous rm was a bad idea.
* Folding in modified_type_caster_generic_load_impl, just enough to pass test_class_wip. test_classh_inheritance is still failing, but with a different error: [RuntimeError: Incompatible type (as_raw_ptr_unowned).]
* Minimal changes needed to pass test_classh_inheritance.
* First pass adjusting try_implicit_casts and try_load_foreign_module_local to capture loaded_v_h, but untested and guarded with pybind11_failure("Untested"). This was done mainly to determine general feasibility. Note the TODO in pybind11.h, where type_caster_generic::local_load is currently hard-coded. test_classh_wip and test_classh_inheritance still pass, as before.
* Decoupling generic_type from type_caster_generic.
* Changes and tests covering classh_type_casters try_implicit_casts.
* Minimal test covering classh_type_casters load_impl Case 2b.
* Removing stray isinstance<T>(src): it interferes with the py::module_local feature. Adding missing #includes.
* Tests for classh py::module_local() feature.
* Pure renaming of function names in test_classh_inheritance, similar to the systematic approach used in test_class_wip. NO functional changes.
* Pure renaming of function and variable names, for better generalization when convoluting with inheritance. NO functional changes.
* Adopting systematic naming scheme from test_classh_wip. NO functional changes.
* Moving const after type name, for functions that cover a systematic scheme. NO functional changes.
* Adding smart_holder_type_caster_load::loaded_as_shared_ptr, currently bypassing smart_holder shared_ptr tracking completely, but the tests pass and are sanitizer clean.
* Removing rtti_held from smart_holder. See updated comment.
* Cleaning up loaded_as_raw_ptr_unowned, loaded_as_shared_ptr.
* Factoring out convert_type and folding into loaded_as_unique_ptr.
* Folding convert_type into lvalue_ref and rvalue_ref paths. Some smart_holder_type_caster_load cleanup.
* Using unique_ptr in local_load to replace static variable. Also adding local_load_safety_guard.
* Converting test_unique_ptr_member to using classh: fully working, ASAN, MSAN, UBSAN clean.
* Removing debugging comments (GET_STACK, GET_INT_STACK). cast.h is identical to current master again, pybind11.h only has the generic_type::initialize(..., &type_caster_generic::local_load) change.
* Purging obsolete pybind11/vptr_holder.h and associated test.
* Moving several tests to github.com/rwgk/rwgk_tbx/tree/main/pybind11_tests
https://github.com/rwgk/rwgk_tbx/commit/a2c2f88174a30f5de80d7d26e0f77c7b60f5fb85
These tests are from experimenting, and for demonstrating UB in pybind11 multiple inheritance handling ("first_base"), to be fixed later.
* Adding py::smart_holder support to py::class_, purging py::classh completely.
* Renaming files in include directory, creating pybind11/smart_holder.h.
* Renaming all "classh" to "smart_holder" in pybind11/detail/smart_holder_type_casters.h.
The user-facing macro is now PYBIND11_SMART_HOLDER_TYPE_CASTERS.
* Systematically renaming tests to use "class_sh" in the name.
* Renaming test_type_caster_bare_interface_demo to test_type_caster_bare_interface.
* Renaming new tests/core subdirectory to tests/pure_cpp.
* Adding new tests to CMake config, resetting CI config.
* Changing CMake file so that test_class_sh_module_local.py actually runs.
* clang-tidy fixes.
* 32-bit compatibility.
* Reusing type_caster_base make_copy_constructor, make_move_constructor with a trick.
* CMake COMPARE NATURAL is not available with older versions.
* Adding copyright notices to new header files.
* Explicitly define copy/move constructors/assignments.
* Adding new header files to tests/extra_python_package/test_files.py.
* Adding tests/pure_cpp/CMakeLists.txt.
* Making use of the new find_existing_python_instance() function factored out with PR #2822.
* Moving define PYBIND11_SMART_HOLDER_TYPE_CASTERS(T) down in the file. NO functional changes. Preparation for follow-up work (to keep that diff smaller).
* Reintroducing py::classh, this time as a simple alias for py::class_<U, py::smart_holder>.
* Replacing detail::is_smart_holder<H> in cast.h with detail::is_smart_holder_type_caster<T>.
Moving get_local_load_function_ptr, init_instance_for_type to smart_holder_type_caster_class_hooks.
Expanding static_assert in py::type::handle_of<> to accommodate smart_holder_type_casters.
* Fixing oversight.
* Adding classu alias for class_<U, std::unique_ptr<U>>.
* Giving up on idea to use legacy init_instance only if is_base_of<type_caster_generic, type_caster<T>. There are use cases in the wild that define both a custom type_caster and class_.
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Moving up is_smart_holder_type_caster, to also use in cast_is_temporary_value_reference.
* Adding smart_holder_type_casters for unique_ptr with custom deleter. SEVERE CODE DUPLICATION. This commit is to establish a baseline for consolidating the unique_ptr code.
* Unification of unique_ptr, unique_ptr_with_deleter code in smart_holder_poc.h. Leads to more fitting error messages. Enables use of unique_ptr<T, D> smart_holder_type_casters also for unique_ptr<T>.
* Copying files as-is from branch test_unique_ptr_member (PR #2672).
* Adding comment, simplifying naming, cmake addition.
* Introducing PYBIND11_USE_SMART_HOLDER_AS_DEFAULT macro (tested only undefined; there are many errors with the macro defined).
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Fixing oversight introduced with commit 95425f13d6c14fcb6ee479b62b602dc8a605ec49.
* Setting record.default_holder correctly for PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
With this test_class.cpp builds and even mostly runs, except
`test_multiple_instances_with_same_pointer`, which segfaults because it is
using a `unique_ptr` holder but `smart_holder` `type_caster`.
Also adding `static_assert`s to generate build errors for such situations,
but guarding with `#if 0` to first pivot to test_factory_constructors.cpp.
* Fixing up cast.h and smart_holder.h after rebase.
* Removing detail/smart_holder_type_casters.h in separate commit.
* Commenting out const in def_buffer(... const). With this, test_buffers builds and runs with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT. Explanation why the const needs to be removed, or fix elsewhere, is still needed, but left for later.
* Adding test_class_sh_factory_constructors, reproducing test_factory_constructors failure. Using py::class_ in this commit, to be changed to py::classh for debugging.
* Removing include/pybind11/detail/smart_holder_type_casters.h from CMakeLists.txt, test_files.py (since it does not exist in this branch).
* Adding // DANGER ZONE reminders.
* Converting as many py::class_ to py::classh as possible, not breaking tests.
* Adding initimpl::construct() overloads, resulting in test_class_sh_factory_constructors feature parity for py::class_ and py::classh.
* Adding enable_if !is_smart_holder_type_caster to existing initimpl::construct(). With this test_factory_constructors.cpp builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Disabling shared_ptr&, shared_ptr* tests when building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT for now, pending work on smart_holder_type_caster<shared_ptr>.
* Factoring out struct and class definitions into anonymous namespace. Preparation for building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Simplifying from_unique_ptr(): typename D = std::default_delete<T> is not needed. Factoring out is_std_default_delete<T>() for consistentcy between ensure_compatible_rtti_uqp_del() and from_unique_ptr().
* Introducing PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. Using it in test_smart_ptr.cpp. With this test_smart_ptr builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT and all but one test run successfully.
* Introducing 1. type_caster_for_class_, used in PYBIND11_MAKE_OPAQUE, and 2. default_holder_type, used in stl_bind.h.
* Using __VA_ARGS__ in PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS.
* Replacing condense_for_macro with much simpler approach.
* Softening static_assert, to only check specifically that smart_holder is not mixed with type_caster_base, and unique_ptr/shared_ptr holders are not mixed with smart_holder_type_casters.
* Adding PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS in test_class.cpp (with this all but one test succeed with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT).
* Adding remaining PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. static_assert for "necessary conditions" for both types of default holder, static_assert for "strict conditions" guarded by new PYBIND11_STRICT_ASSERTS_CLASS_HOLDER_VS_TYPE_CASTER_MIX. All tests build & run as before with unique_ptr as the default holder, all tests build for smart_holder as the default holder, even with the strict static_assert.
* Introducing check_is_smart_holder_type_caster() function for runtime check, and reinterpreting record.default_holder as "uses_unique_ptr_holder". With this test_smart_ptr succeeds. (All 42 tests build, 35 tests succeed, 5 run but have some failures, 2 segfault.)
* Bug fix: Adding have_value() to smart_holder_type_caster_load. With this test_builtin_casters succeeds. (All 42 tests build, 36 tests succeed, 5 run but have some failures, 1 segfault.)
* Adding unowned_void_ptr_from_direct_conversion to modified_type_caster_generic_load_impl. This fixes the last remaining segfault (test_numpy_dtypes). New stats for all tests combined: 12 failed, 458 passed.
* Adding "Lazy allocation for unallocated values" (for old-style __init__) into load_value_and_holder. Deferring destruction of disowned holder until clear_instance, to remain inspectable for "uninitialized" or "disowned" detection. New stats for all tests combined: 5 failed, 465 passed.
* Changing std::shared_ptr pointer/reference to const pointer/reference. New stats for all tests combined: 4 failed, 466 passed.
* Adding return_value_policy::move to permissible policies for unique_ptr returns. New stats for all tests combined: 3 failed, 467 passed.
* Overlooked flake8 fixes.
* Manipulating failing ConstructorStats test to pass, to be able to run all tests with ASAN.
This version of the code is ASAN clean with unique_ptr or smart_holder as the default.
This change needs to be reverted after adopting the existing move-only-if-refcount-is-1
logic used by type_caster_base.
* Adding copy constructor and move constructor tracking to atyp. Preparation for a follow-up change in smart_holder_type_caster, to make this test sensitive to the changing behavior.
[skip ci]
* Removing `operator T&&() &&` from smart_holder_type_caster, for compatibility with the behavior of type_caster_base. Enables reverting 2 of 3 test manipulations applied under commit 249df7cbdb09817fed0ddf80f01ba5af12466820. The manipulation in test_factory_constructors.py is NOT reverted in this commit.
[skip ci]
* Fixing unfortunate editing mishap. This reverts the last remaining test manipulation in commit 249df7cbdb09817fed0ddf80f01ba5af12466820 and makes all existing unit tests pass with smart_holder as default holder.
* GitHub CI clang-tidy fixes.
* Adding messages to terse `static_assert`s, for pre-C++17 compatibility.
* Using @pytest.mark.parametrize to run each assert separately (to see all errors, not just the first).
* Systematically removing _atyp from function names, to make the test code simpler.
* Using re.match to accommodate variable number of intermediate MvCtor.
* Also removing `operator T()` from smart_holder_type_caster, to fix gcc compilation errors. The only loss is pass_rref in test_class_sh_basic.
* Systematically replacing `detail::enable_if_t<...smart_holder...>` with `typename std::enable_if<...smart_holder...>::type`. Attempt to work around MSVC 2015 issues, to be tested via GitHub CI. The idea for this change originates from this comment: https://github.com/pybind/pybind11/issues/1616#issuecomment-444536813
* Importing re before pytest after observing a PyPy CI flake when importing pytest first.
* Copying MSVC 2015 compatibility change from branch pr2672_use_smart_holder_as_default.
* Introducing is_smart_holder_type_caster_base_tag, to keep smart_holder code more disconnected.
* Working around MSVC 2015 bug.
* Expanding comment for MSVC 2015 workaround.
* Systematically changing std::enable_if back to detail::enable_if_t, effectively reverting commit 5d4b6890a337ae1bbaec4091f4195606f89a3b06.
* Removing unused smart_holder_type_caster_load::loaded_as_rvalue_ref (it was an oversight that it was not removed with commit 23036a45eb4731a06b488ec1fdf83bca677b7f67).
* Removing py::classu, because it does not seem useful enough.
* Reverting commit 63495313066119dcf7510c2ae8b468b46c12ef8f by un-commenting `const` in `def_buffer(...)`. To make this possible, `operator T const&` and `operator T const*` in `smart_holder_type_caster` need to be marked as `const` member functions.
* Adding construct() overloads for constructing smart_holder from alias unique_ptr, shared_ptr returns.
* Adding test_class_sh_factory_constructors.cpp to tests/CMakeLists.txt (fixes oversight, this should have been added long before).
* Compatibility with old clang versions (clang 3.6, 3.7 C++11).
* Cleaning up changes to existing unit tests.
* Systematically adding SMART_HOLDER_WIP tag. Removing minor UNTESTED tags (only the throw are not actually exercised, investing time there has a high cost but very little benefit).
* Splitting out smart_holder_type_casters again, into new detail/smart_holder_type_casters_inline_include.h.
* Splitting out smart_holder_init_inline_include.h.
* Adding additional new include files to CMakeLists.txt, tests/extra_python_package/test_files.py.
* clang-format cleanup of most smart_holder code.
* Adding source code comments in response to review.
* Simple micro-benchmark ("ubench") comparing runtime performance for several holders.
Tested using github.com/rwgk/pybind11_scons and Google-internal build system.
Sorry, no cmake support at the moment.
First results: https://docs.google.com/spreadsheets/d/1InapCYws2Gt-stmFf_Bwl33eOMo3aLE_gc9adveY7RU/edit#gid=0
* Breaking out number_bucket.h, adding hook for also collecting performance data for PyCLIF.
* Accounting for ubench in MANIFEST.in (simply prune, for now).
* Smarter determination of call_repetitions.
[skip ci]
* Also scaling performance data to PyCLIF.
[skip ci]
* Adding ubench/python/number_bucket.clif here for general visibility.
* Fix after rebase
* Merging detail/smart_holder_init_inline_include.h into detail/init.h.
* Renaming detail/is_smart_holder_type_caster.h -> detail/smart_holder_sfinae_hooks_only.h.
* Renaming is_smart_holder_type_caster -> type_uses_smart_holder_type_caster for clarity.
* Renaming type_caster_type_is_smart_holder_type_caster -> wrapped_type_uses_smart_holder_type_caster for clarity.
* Renaming is_smart_holder_type_caster_base_tag -> smart_holder_type_caster_base_tag for simplicity.
* Adding copyright notices and minor colateral cleanup.
* iwyu cleanup (comprehensive only for cast.h and smart_holder*.h files).
* Fixing `git rebase master` accident.
* Moving large `pragma warning` block from pybind11.h to detail/common.h.
* Fixing another `git rebase master` accident.
2021-02-24 05:50:42 +00:00
|
|
|
list(APPEND PYBIND11_PYTEST_FILES test_class_sh_module_local.py)
|
|
|
|
|
list(SORT PYBIND11_PYTEST_FILES)
|
2016-08-12 11:50:00 +00:00
|
|
|
|
2017-07-29 00:57:57 +00:00
|
|
|
# Contains the set of test files that require pybind11_cross_module_tests to be
|
|
|
|
|
# built; if none of these are built (i.e. because TEST_OVERRIDE is used and
|
|
|
|
|
# doesn't include them) the second module doesn't get built.
|
2020-07-30 20:20:10 +00:00
|
|
|
set(PYBIND11_CROSS_MODULE_TESTS test_exceptions.py test_local_bindings.py test_stl.py
|
|
|
|
|
test_stl_binders.py)
|
2017-07-29 00:57:57 +00:00
|
|
|
|
2020-07-30 20:20:10 +00:00
|
|
|
set(PYBIND11_CROSS_MODULE_GIL_TESTS test_gil_scoped.py)
|
2019-07-15 14:47:02 +00:00
|
|
|
|
Adding py::smart_holder (for smart-pointer interoperability). (#2672)
* Adding test_unique_ptr_member (for desired PyCLIF behavior).
See also: https://github.com/pybind/pybind11/issues/2583
Does not build with upstream master or
https://github.com/pybind/pybind11/pull/2047, but builds with
https://github.com/RobotLocomotion/pybind11 and almost runs:
```
Running tests in directory "/usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests":
================================================================================= test session starts =================================================================================
platform linux -- Python 3.8.5, pytest-5.4.3, py-1.9.0, pluggy-0.13.1
rootdir: /usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests, inifile: pytest.ini
collected 2 items
test_unique_ptr_member.py .F [100%]
====================================================================================== FAILURES =======================================================================================
_____________________________________________________________________________ test_pointee_and_ptr_owner ______________________________________________________________________________
def test_pointee_and_ptr_owner():
obj = m.pointee()
assert obj.get_int() == 213
m.ptr_owner(obj)
with pytest.raises(ValueError) as exc_info:
> obj.get_int()
E Failed: DID NOT RAISE <class 'ValueError'>
test_unique_ptr_member.py:17: Failed
============================================================================= 1 failed, 1 passed in 0.06s =============================================================================
```
* unique_ptr or shared_ptr return
* new test_variant_unique_shared with vptr_holder prototype
* moving prototype code to pybind11/vptr_holder.h, adding type_caster specialization to make the bindings involving unique_ptr passing compile, but load and cast implementations are missing
* disabling GitHub Actions on pull_request (for this PR)
* disabling AppVeyor (for this PR)
* TRIGGER_SEGSEV macro, annotations for GET_STACK (vptr::get), GET_INT_STACK (pointee)
* adding test_promotion_of_disowned_to_shared
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising returning and passing unique_ptr<T>, shared_ptr<T>
with unique_ptr, shared_ptr holder.
Observations:
test_holder_unique_ptr:
make_unique_pointee OK
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee Abort free(): double free detected
pass_shared_pointee RuntimeError: Unable to load a custom holder type from a default-holder instance
test_holder_shared_ptr:
make_unique_pointee Segmentation fault (#1138)
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee OK
pass_shared_pointee OK
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising casting between shared_ptr<base>, shared_ptr<derived>.
* Demonstration of Undefined Behavior in handling of shared_ptr holder.
Based on https://godbolt.org/z/4fdjaW by jorgbrown@ (thanks Jorg!).
* Additional demonstration of Undefined Behavior in handling of shared_ptr holder.
* fixing up-down mixup in comment
* Demonstration of Undefined Behavior in handling of polymorphic pointers.
(This demo does NOT involve smart pointers at all, unlike the otherwise similar test_smart_ptr_private_first_base.)
* minor test_private_first_base.cpp simplification (after discovering that this can be wrapped with Boost.Python, using boost::noncopyable)
* pybind11 equivalent of Boost.Python test similar to reproducer under #1333
* Snapshot of WIP, TODO: shared_ptr deleter with on/off switch
* Adding vptr_deleter.
* Adding from/as unique_ptr<T> and unique_ptr<T, D>.
* Adding from_shared_ptr. Some polishing.
* New tests/core/smart_holder_poc_test.cpp, using Catch2.
* Adding in vptr_deleter_guard_flag.
* Improved labeling of TEST_CASEs.
* Shuffling existing TEST_CASEs into systematic matrix.
* Implementing all [S]uccess tests.
* Implementing all [E]xception tests.
* Testing of exceptions not covered by the from-as matrix.
* Adding top-level comment.
* Converting from methods to factory functions (no functional change).
* Removing obsolete and very incomplete test (replaced by Catch2-based test).
* Removing stray file.
* Adding type_caster_bare_interface_demo.
* Adding shared_ptr<mpty>, shared_ptr<mpty const> casters.
* Adding unique_ptr<mpty>, unique_ptr<mpty const> casters.
* Pure copy of `class class_` implementation in pybind11.h (master commit 98f1bbb8004f654ba9e26717bdf5912fb899b05a).
* classh.h: renaming of class_ to classh + namespace; forking test_classh_wip from test_type_caster_bare_interface_demo.
* Hard-coding smart_holder into classh.
* Adding mpty::mtxt string member.
* Adding isinstance<mpty> in type_caster::load functions.
* Adding rvalue_ref, renaming const_value_ref to lvalue_ref & removing const.
* Retrieving smart_holder pointer in type_caster<mpty>::load, and using it cast_op operators.
* Factoring out smart_holder_type_caster_load.
* Retrieving smart_holder pointer in type_caster<std::shared_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Improved error messaging: Cannot disown nullptr (as_unique_ptr).
* Retrieving smart_holder pointer in type_caster<std::unique_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Pure `clang-format --style=file -i` change.
* Pure `clang-format --style=file -i` change, with two `clang-format off` directives.
* Fixing oversight (discovered by flake8).
* flake8 cleanup
* Systematically setting mtxt for all rtrn_mpty_* functions (preparation, the values are not actually used yet).
* static cast handle for rtrn_cptr works by simply dropping in code from type_caster_base (marked with comments).
* static cast handle for rtrn_cref works by simply dropping in code from type_caster_base (marked with comments). rtrn_mref and rtrn_mptr work via const_cast (to add const).
* static cast handle for rtrn_valu works by simply dropping in code from type_caster_base (marked with comments). rtrn_rref raises a RuntimeError, to be investigated.
* Copying type_caster_generic::cast into type_caster<mpty> as-is (preparation for handling smart pointers).
* Pure clang-format change (applied to original type_caster_generic::cast).
* Adding comment re potential use_count data race.
* static handle cast implementations for rtrn_shmp, rtrn_shcp.
* Adding MISSING comments in operator std::unique_ptr<mpty[ const]>.
* static handle cast implementations for rtrn_uqmp, rtrn_uqcp.
* Bug fix: vptr_deleter_armed_flag_ptr has to live on the heap.
See new bullet point in comment section near the top.
The variable was also renamed to reflect its function more accurately.
* Fixing bugs discovered by ASAN. The code is now ASAN, MSAN, UBSAN clean.
* Making test_type_caster_bare_interface_demo.cpp slightly more realistic, ASAN, MSAN, UBSAN clean.
* Calling deregister_instance after disowning via unique_ptr.
* Removing enable_shared_from_this stub, simplifying existing code, clang-format.
Open question, with respect to the original code:
https://github.com/pybind/pybind11/blob/76a160070b369f8d82b945c97924227e8b835c94/include/pybind11/pybind11.h#L1510
To me it looks like the exact situation marked as `std::shared_ptr<Good> gp1 = not_so_good.getptr();` here: https://en.cppreference.com/w/cpp/memory/enable_shared_from_this
The comment there is: `// undefined behavior (until C++17) and std::bad_weak_ptr thrown (since C++17)`
Does the existing code have UB pre C++17?
I'll leave handling of enable_shared_from_this for later, as the need arises.
* Cosmetical change around helper functions.
* Using type_caster_base<mpty>::src_and_type directly, removing copy. Also renaming one cast to cast_const_raw_ptr, for clarity.
* Fixing clang-format oversight.
* Using factored-out make_constructor (PR #2798), removing duplicate code.
* Inserting additional assert to ensure a returned unique_ptr is always a new Python instance.
* Adding minor comment (change to internals needed to distinguish uninitialized/disowned in error message).
* Factoring out find_existing_python_instance().
* Moving factored-out make_constructor to test_classh_wip.cpp, restoring previous version of cast.h. This is currently the most practical approach. See PR #2798 for background.
* Copying classh type_casters from test_classh_wip.cpp UNMODIFIED, as a baseline for generalizing the code.
* Using pybind11/detail/classh_type_casters.h from test_classh_wip.cpp.
* Adding & using PYBIND11_CLASSH_TYPE_CASTERS define.
* Adding test_classh_inheritance, currently failing (passes with class_).
* Removing .clang-format before git rebase master (where the file was added).
* Bringing back .clang-format, the previous rm was a bad idea.
* Folding in modified_type_caster_generic_load_impl, just enough to pass test_class_wip. test_classh_inheritance is still failing, but with a different error: [RuntimeError: Incompatible type (as_raw_ptr_unowned).]
* Minimal changes needed to pass test_classh_inheritance.
* First pass adjusting try_implicit_casts and try_load_foreign_module_local to capture loaded_v_h, but untested and guarded with pybind11_failure("Untested"). This was done mainly to determine general feasibility. Note the TODO in pybind11.h, where type_caster_generic::local_load is currently hard-coded. test_classh_wip and test_classh_inheritance still pass, as before.
* Decoupling generic_type from type_caster_generic.
* Changes and tests covering classh_type_casters try_implicit_casts.
* Minimal test covering classh_type_casters load_impl Case 2b.
* Removing stray isinstance<T>(src): it interferes with the py::module_local feature. Adding missing #includes.
* Tests for classh py::module_local() feature.
* Pure renaming of function names in test_classh_inheritance, similar to the systematic approach used in test_class_wip. NO functional changes.
* Pure renaming of function and variable names, for better generalization when convoluting with inheritance. NO functional changes.
* Adopting systematic naming scheme from test_classh_wip. NO functional changes.
* Moving const after type name, for functions that cover a systematic scheme. NO functional changes.
* Adding smart_holder_type_caster_load::loaded_as_shared_ptr, currently bypassing smart_holder shared_ptr tracking completely, but the tests pass and are sanitizer clean.
* Removing rtti_held from smart_holder. See updated comment.
* Cleaning up loaded_as_raw_ptr_unowned, loaded_as_shared_ptr.
* Factoring out convert_type and folding into loaded_as_unique_ptr.
* Folding convert_type into lvalue_ref and rvalue_ref paths. Some smart_holder_type_caster_load cleanup.
* Using unique_ptr in local_load to replace static variable. Also adding local_load_safety_guard.
* Converting test_unique_ptr_member to using classh: fully working, ASAN, MSAN, UBSAN clean.
* Removing debugging comments (GET_STACK, GET_INT_STACK). cast.h is identical to current master again, pybind11.h only has the generic_type::initialize(..., &type_caster_generic::local_load) change.
* Purging obsolete pybind11/vptr_holder.h and associated test.
* Moving several tests to github.com/rwgk/rwgk_tbx/tree/main/pybind11_tests
https://github.com/rwgk/rwgk_tbx/commit/a2c2f88174a30f5de80d7d26e0f77c7b60f5fb85
These tests are from experimenting, and for demonstrating UB in pybind11 multiple inheritance handling ("first_base"), to be fixed later.
* Adding py::smart_holder support to py::class_, purging py::classh completely.
* Renaming files in include directory, creating pybind11/smart_holder.h.
* Renaming all "classh" to "smart_holder" in pybind11/detail/smart_holder_type_casters.h.
The user-facing macro is now PYBIND11_SMART_HOLDER_TYPE_CASTERS.
* Systematically renaming tests to use "class_sh" in the name.
* Renaming test_type_caster_bare_interface_demo to test_type_caster_bare_interface.
* Renaming new tests/core subdirectory to tests/pure_cpp.
* Adding new tests to CMake config, resetting CI config.
* Changing CMake file so that test_class_sh_module_local.py actually runs.
* clang-tidy fixes.
* 32-bit compatibility.
* Reusing type_caster_base make_copy_constructor, make_move_constructor with a trick.
* CMake COMPARE NATURAL is not available with older versions.
* Adding copyright notices to new header files.
* Explicitly define copy/move constructors/assignments.
* Adding new header files to tests/extra_python_package/test_files.py.
* Adding tests/pure_cpp/CMakeLists.txt.
* Making use of the new find_existing_python_instance() function factored out with PR #2822.
* Moving define PYBIND11_SMART_HOLDER_TYPE_CASTERS(T) down in the file. NO functional changes. Preparation for follow-up work (to keep that diff smaller).
* Reintroducing py::classh, this time as a simple alias for py::class_<U, py::smart_holder>.
* Replacing detail::is_smart_holder<H> in cast.h with detail::is_smart_holder_type_caster<T>.
Moving get_local_load_function_ptr, init_instance_for_type to smart_holder_type_caster_class_hooks.
Expanding static_assert in py::type::handle_of<> to accommodate smart_holder_type_casters.
* Fixing oversight.
* Adding classu alias for class_<U, std::unique_ptr<U>>.
* Giving up on idea to use legacy init_instance only if is_base_of<type_caster_generic, type_caster<T>. There are use cases in the wild that define both a custom type_caster and class_.
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Moving up is_smart_holder_type_caster, to also use in cast_is_temporary_value_reference.
* Adding smart_holder_type_casters for unique_ptr with custom deleter. SEVERE CODE DUPLICATION. This commit is to establish a baseline for consolidating the unique_ptr code.
* Unification of unique_ptr, unique_ptr_with_deleter code in smart_holder_poc.h. Leads to more fitting error messages. Enables use of unique_ptr<T, D> smart_holder_type_casters also for unique_ptr<T>.
* Copying files as-is from branch test_unique_ptr_member (PR #2672).
* Adding comment, simplifying naming, cmake addition.
* Introducing PYBIND11_USE_SMART_HOLDER_AS_DEFAULT macro (tested only undefined; there are many errors with the macro defined).
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Fixing oversight introduced with commit 95425f13d6c14fcb6ee479b62b602dc8a605ec49.
* Setting record.default_holder correctly for PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
With this test_class.cpp builds and even mostly runs, except
`test_multiple_instances_with_same_pointer`, which segfaults because it is
using a `unique_ptr` holder but `smart_holder` `type_caster`.
Also adding `static_assert`s to generate build errors for such situations,
but guarding with `#if 0` to first pivot to test_factory_constructors.cpp.
* Fixing up cast.h and smart_holder.h after rebase.
* Removing detail/smart_holder_type_casters.h in separate commit.
* Commenting out const in def_buffer(... const). With this, test_buffers builds and runs with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT. Explanation why the const needs to be removed, or fix elsewhere, is still needed, but left for later.
* Adding test_class_sh_factory_constructors, reproducing test_factory_constructors failure. Using py::class_ in this commit, to be changed to py::classh for debugging.
* Removing include/pybind11/detail/smart_holder_type_casters.h from CMakeLists.txt, test_files.py (since it does not exist in this branch).
* Adding // DANGER ZONE reminders.
* Converting as many py::class_ to py::classh as possible, not breaking tests.
* Adding initimpl::construct() overloads, resulting in test_class_sh_factory_constructors feature parity for py::class_ and py::classh.
* Adding enable_if !is_smart_holder_type_caster to existing initimpl::construct(). With this test_factory_constructors.cpp builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Disabling shared_ptr&, shared_ptr* tests when building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT for now, pending work on smart_holder_type_caster<shared_ptr>.
* Factoring out struct and class definitions into anonymous namespace. Preparation for building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Simplifying from_unique_ptr(): typename D = std::default_delete<T> is not needed. Factoring out is_std_default_delete<T>() for consistentcy between ensure_compatible_rtti_uqp_del() and from_unique_ptr().
* Introducing PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. Using it in test_smart_ptr.cpp. With this test_smart_ptr builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT and all but one test run successfully.
* Introducing 1. type_caster_for_class_, used in PYBIND11_MAKE_OPAQUE, and 2. default_holder_type, used in stl_bind.h.
* Using __VA_ARGS__ in PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS.
* Replacing condense_for_macro with much simpler approach.
* Softening static_assert, to only check specifically that smart_holder is not mixed with type_caster_base, and unique_ptr/shared_ptr holders are not mixed with smart_holder_type_casters.
* Adding PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS in test_class.cpp (with this all but one test succeed with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT).
* Adding remaining PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. static_assert for "necessary conditions" for both types of default holder, static_assert for "strict conditions" guarded by new PYBIND11_STRICT_ASSERTS_CLASS_HOLDER_VS_TYPE_CASTER_MIX. All tests build & run as before with unique_ptr as the default holder, all tests build for smart_holder as the default holder, even with the strict static_assert.
* Introducing check_is_smart_holder_type_caster() function for runtime check, and reinterpreting record.default_holder as "uses_unique_ptr_holder". With this test_smart_ptr succeeds. (All 42 tests build, 35 tests succeed, 5 run but have some failures, 2 segfault.)
* Bug fix: Adding have_value() to smart_holder_type_caster_load. With this test_builtin_casters succeeds. (All 42 tests build, 36 tests succeed, 5 run but have some failures, 1 segfault.)
* Adding unowned_void_ptr_from_direct_conversion to modified_type_caster_generic_load_impl. This fixes the last remaining segfault (test_numpy_dtypes). New stats for all tests combined: 12 failed, 458 passed.
* Adding "Lazy allocation for unallocated values" (for old-style __init__) into load_value_and_holder. Deferring destruction of disowned holder until clear_instance, to remain inspectable for "uninitialized" or "disowned" detection. New stats for all tests combined: 5 failed, 465 passed.
* Changing std::shared_ptr pointer/reference to const pointer/reference. New stats for all tests combined: 4 failed, 466 passed.
* Adding return_value_policy::move to permissible policies for unique_ptr returns. New stats for all tests combined: 3 failed, 467 passed.
* Overlooked flake8 fixes.
* Manipulating failing ConstructorStats test to pass, to be able to run all tests with ASAN.
This version of the code is ASAN clean with unique_ptr or smart_holder as the default.
This change needs to be reverted after adopting the existing move-only-if-refcount-is-1
logic used by type_caster_base.
* Adding copy constructor and move constructor tracking to atyp. Preparation for a follow-up change in smart_holder_type_caster, to make this test sensitive to the changing behavior.
[skip ci]
* Removing `operator T&&() &&` from smart_holder_type_caster, for compatibility with the behavior of type_caster_base. Enables reverting 2 of 3 test manipulations applied under commit 249df7cbdb09817fed0ddf80f01ba5af12466820. The manipulation in test_factory_constructors.py is NOT reverted in this commit.
[skip ci]
* Fixing unfortunate editing mishap. This reverts the last remaining test manipulation in commit 249df7cbdb09817fed0ddf80f01ba5af12466820 and makes all existing unit tests pass with smart_holder as default holder.
* GitHub CI clang-tidy fixes.
* Adding messages to terse `static_assert`s, for pre-C++17 compatibility.
* Using @pytest.mark.parametrize to run each assert separately (to see all errors, not just the first).
* Systematically removing _atyp from function names, to make the test code simpler.
* Using re.match to accommodate variable number of intermediate MvCtor.
* Also removing `operator T()` from smart_holder_type_caster, to fix gcc compilation errors. The only loss is pass_rref in test_class_sh_basic.
* Systematically replacing `detail::enable_if_t<...smart_holder...>` with `typename std::enable_if<...smart_holder...>::type`. Attempt to work around MSVC 2015 issues, to be tested via GitHub CI. The idea for this change originates from this comment: https://github.com/pybind/pybind11/issues/1616#issuecomment-444536813
* Importing re before pytest after observing a PyPy CI flake when importing pytest first.
* Copying MSVC 2015 compatibility change from branch pr2672_use_smart_holder_as_default.
* Introducing is_smart_holder_type_caster_base_tag, to keep smart_holder code more disconnected.
* Working around MSVC 2015 bug.
* Expanding comment for MSVC 2015 workaround.
* Systematically changing std::enable_if back to detail::enable_if_t, effectively reverting commit 5d4b6890a337ae1bbaec4091f4195606f89a3b06.
* Removing unused smart_holder_type_caster_load::loaded_as_rvalue_ref (it was an oversight that it was not removed with commit 23036a45eb4731a06b488ec1fdf83bca677b7f67).
* Removing py::classu, because it does not seem useful enough.
* Reverting commit 63495313066119dcf7510c2ae8b468b46c12ef8f by un-commenting `const` in `def_buffer(...)`. To make this possible, `operator T const&` and `operator T const*` in `smart_holder_type_caster` need to be marked as `const` member functions.
* Adding construct() overloads for constructing smart_holder from alias unique_ptr, shared_ptr returns.
* Adding test_class_sh_factory_constructors.cpp to tests/CMakeLists.txt (fixes oversight, this should have been added long before).
* Compatibility with old clang versions (clang 3.6, 3.7 C++11).
* Cleaning up changes to existing unit tests.
* Systematically adding SMART_HOLDER_WIP tag. Removing minor UNTESTED tags (only the throw are not actually exercised, investing time there has a high cost but very little benefit).
* Splitting out smart_holder_type_casters again, into new detail/smart_holder_type_casters_inline_include.h.
* Splitting out smart_holder_init_inline_include.h.
* Adding additional new include files to CMakeLists.txt, tests/extra_python_package/test_files.py.
* clang-format cleanup of most smart_holder code.
* Adding source code comments in response to review.
* Simple micro-benchmark ("ubench") comparing runtime performance for several holders.
Tested using github.com/rwgk/pybind11_scons and Google-internal build system.
Sorry, no cmake support at the moment.
First results: https://docs.google.com/spreadsheets/d/1InapCYws2Gt-stmFf_Bwl33eOMo3aLE_gc9adveY7RU/edit#gid=0
* Breaking out number_bucket.h, adding hook for also collecting performance data for PyCLIF.
* Accounting for ubench in MANIFEST.in (simply prune, for now).
* Smarter determination of call_repetitions.
[skip ci]
* Also scaling performance data to PyCLIF.
[skip ci]
* Adding ubench/python/number_bucket.clif here for general visibility.
* Fix after rebase
* Merging detail/smart_holder_init_inline_include.h into detail/init.h.
* Renaming detail/is_smart_holder_type_caster.h -> detail/smart_holder_sfinae_hooks_only.h.
* Renaming is_smart_holder_type_caster -> type_uses_smart_holder_type_caster for clarity.
* Renaming type_caster_type_is_smart_holder_type_caster -> wrapped_type_uses_smart_holder_type_caster for clarity.
* Renaming is_smart_holder_type_caster_base_tag -> smart_holder_type_caster_base_tag for simplicity.
* Adding copyright notices and minor colateral cleanup.
* iwyu cleanup (comprehensive only for cast.h and smart_holder*.h files).
* Fixing `git rebase master` accident.
* Moving large `pragma warning` block from pybind11.h to detail/common.h.
* Fixing another `git rebase master` accident.
2021-02-24 05:50:42 +00:00
|
|
|
set(PYBIND11_CLASS_SH_MODULE_LOCAL_TESTS test_class_sh_module_local.py)
|
|
|
|
|
|
2016-09-03 18:54:22 +00:00
|
|
|
# Check if Eigen is available; if not, remove from PYBIND11_TEST_FILES (but
|
|
|
|
|
# keep it in PYBIND11_PYTEST_FILES, so that we get the "eigen is not installed"
|
|
|
|
|
# skip message).
|
|
|
|
|
list(FIND PYBIND11_TEST_FILES test_eigen.cpp PYBIND11_TEST_FILES_EIGEN_I)
|
|
|
|
|
if(PYBIND11_TEST_FILES_EIGEN_I GREATER -1)
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
# Try loading via newer Eigen's Eigen3Config first (bypassing tools/FindEigen3.cmake).
|
|
|
|
|
# Eigen 3.3.1+ exports a cmake 3.0+ target for handling dependency requirements, but also
|
|
|
|
|
# produces a fatal error if loaded from a pre-3.0 cmake.
|
2020-07-26 17:44:10 +00:00
|
|
|
if(DOWNLOAD_EIGEN)
|
|
|
|
|
if(CMAKE_VERSION VERSION_LESS 3.11)
|
|
|
|
|
message(FATAL_ERROR "CMake 3.11+ required when using DOWNLOAD_EIGEN")
|
|
|
|
|
endif()
|
|
|
|
|
|
2020-10-15 04:07:54 +00:00
|
|
|
set(EIGEN3_VERSION_STRING "3.3.8")
|
2020-07-26 17:44:10 +00:00
|
|
|
|
|
|
|
|
include(FetchContent)
|
|
|
|
|
FetchContent_Declare(
|
|
|
|
|
eigen
|
|
|
|
|
GIT_REPOSITORY https://gitlab.com/libeigen/eigen.git
|
2020-07-30 20:20:10 +00:00
|
|
|
GIT_TAG ${EIGEN3_VERSION_STRING})
|
2020-07-26 17:44:10 +00:00
|
|
|
|
|
|
|
|
FetchContent_GetProperties(eigen)
|
|
|
|
|
if(NOT eigen_POPULATED)
|
|
|
|
|
message(STATUS "Downloading Eigen")
|
|
|
|
|
FetchContent_Populate(eigen)
|
|
|
|
|
endif()
|
|
|
|
|
|
|
|
|
|
set(EIGEN3_INCLUDE_DIR ${eigen_SOURCE_DIR})
|
|
|
|
|
set(EIGEN3_FOUND TRUE)
|
2020-08-19 16:26:26 +00:00
|
|
|
|
2020-07-26 17:44:10 +00:00
|
|
|
else()
|
2020-07-28 04:43:12 +00:00
|
|
|
find_package(Eigen3 3.2.7 QUIET CONFIG)
|
|
|
|
|
|
2020-07-30 20:20:10 +00:00
|
|
|
if(NOT EIGEN3_FOUND)
|
2020-07-26 17:44:10 +00:00
|
|
|
# Couldn't load via target, so fall back to allowing module mode finding, which will pick up
|
|
|
|
|
# tools/FindEigen3.cmake
|
|
|
|
|
find_package(Eigen3 3.2.7 QUIET)
|
|
|
|
|
endif()
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
endif()
|
2016-09-03 18:54:22 +00:00
|
|
|
|
|
|
|
|
if(EIGEN3_FOUND)
|
2020-08-19 16:26:26 +00:00
|
|
|
if(NOT TARGET Eigen3::Eigen)
|
|
|
|
|
add_library(Eigen3::Eigen IMPORTED INTERFACE)
|
|
|
|
|
set_property(TARGET Eigen3::Eigen PROPERTY INTERFACE_INCLUDE_DIRECTORIES
|
|
|
|
|
"${EIGEN3_INCLUDE_DIR}")
|
|
|
|
|
endif()
|
|
|
|
|
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
# Eigen 3.3.1+ cmake sets EIGEN3_VERSION_STRING (and hard codes the version when installed
|
|
|
|
|
# rather than looking it up in the cmake script); older versions, and the
|
|
|
|
|
# tools/FindEigen3.cmake, set EIGEN3_VERSION instead.
|
|
|
|
|
if(NOT EIGEN3_VERSION AND EIGEN3_VERSION_STRING)
|
|
|
|
|
set(EIGEN3_VERSION ${EIGEN3_VERSION_STRING})
|
|
|
|
|
endif()
|
2016-09-03 18:54:22 +00:00
|
|
|
message(STATUS "Building tests with Eigen v${EIGEN3_VERSION}")
|
|
|
|
|
else()
|
|
|
|
|
list(REMOVE_AT PYBIND11_TEST_FILES ${PYBIND11_TEST_FILES_EIGEN_I})
|
2021-02-12 22:11:23 +00:00
|
|
|
message(
|
|
|
|
|
STATUS "Building tests WITHOUT Eigen, use -DDOWNLOAD_EIGEN=ON on CMake 3.11+ to download")
|
2016-09-03 18:54:22 +00:00
|
|
|
endif()
|
2016-08-12 11:50:00 +00:00
|
|
|
endif()
|
|
|
|
|
|
2017-08-25 19:11:36 +00:00
|
|
|
# Optional dependency for some tests (boost::variant is only supported with version >= 1.56)
|
|
|
|
|
find_package(Boost 1.56)
|
2017-08-08 14:02:31 +00:00
|
|
|
|
2020-08-19 16:26:26 +00:00
|
|
|
if(Boost_FOUND)
|
|
|
|
|
if(NOT TARGET Boost::headers)
|
2020-10-19 00:42:48 +00:00
|
|
|
add_library(Boost::headers IMPORTED INTERFACE)
|
2020-08-19 16:26:26 +00:00
|
|
|
if(TARGET Boost::boost)
|
|
|
|
|
# Classic FindBoost
|
2020-10-19 00:42:48 +00:00
|
|
|
set_property(TARGET Boost::boost PROPERTY INTERFACE_LINK_LIBRARIES Boost::boost)
|
2020-08-19 16:26:26 +00:00
|
|
|
else()
|
|
|
|
|
# Very old FindBoost, or newer Boost than CMake in older CMakes
|
|
|
|
|
set_property(TARGET Boost::headers PROPERTY INTERFACE_INCLUDE_DIRECTORIES
|
|
|
|
|
${Boost_INCLUDE_DIRS})
|
|
|
|
|
endif()
|
|
|
|
|
endif()
|
|
|
|
|
endif()
|
|
|
|
|
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
# Compile with compiler warnings turned on
|
|
|
|
|
function(pybind11_enable_warnings target_name)
|
|
|
|
|
if(MSVC)
|
|
|
|
|
target_compile_options(${target_name} PRIVATE /W4)
|
2020-09-10 15:49:26 +00:00
|
|
|
elseif(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Intel|Clang)" AND NOT PYBIND11_CUDA_TESTS)
|
2020-10-29 13:12:14 +00:00
|
|
|
target_compile_options(
|
|
|
|
|
${target_name}
|
|
|
|
|
PRIVATE -Wall
|
|
|
|
|
-Wextra
|
|
|
|
|
-Wconversion
|
|
|
|
|
-Wcast-qual
|
|
|
|
|
-Wdeprecated
|
|
|
|
|
-Wundef
|
|
|
|
|
-Wnon-virtual-dtor)
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
endif()
|
|
|
|
|
|
|
|
|
|
if(PYBIND11_WERROR)
|
|
|
|
|
if(MSVC)
|
|
|
|
|
target_compile_options(${target_name} PRIVATE /WX)
|
2020-09-10 15:49:26 +00:00
|
|
|
elseif(PYBIND11_CUDA_TESTS)
|
|
|
|
|
target_compile_options(${target_name} PRIVATE "SHELL:-Werror all-warnings")
|
2019-06-11 20:42:30 +00:00
|
|
|
elseif(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Intel|Clang)")
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
target_compile_options(${target_name} PRIVATE -Werror)
|
|
|
|
|
endif()
|
|
|
|
|
endif()
|
2020-07-22 14:20:42 +00:00
|
|
|
|
2020-07-28 04:43:12 +00:00
|
|
|
# Needs to be readded since the ordering requires these to be after the ones above
|
2020-07-30 20:20:10 +00:00
|
|
|
if(CMAKE_CXX_STANDARD
|
|
|
|
|
AND CMAKE_CXX_COMPILER_ID MATCHES "Clang"
|
|
|
|
|
AND PYTHON_VERSION VERSION_LESS 3.0)
|
2020-07-24 02:55:29 +00:00
|
|
|
if(CMAKE_CXX_STANDARD LESS 17)
|
2020-07-22 14:20:42 +00:00
|
|
|
target_compile_options(${target_name} PUBLIC -Wno-deprecated-register)
|
2020-07-24 02:55:29 +00:00
|
|
|
else()
|
2020-07-22 14:20:42 +00:00
|
|
|
target_compile_options(${target_name} PUBLIC -Wno-register)
|
|
|
|
|
endif()
|
|
|
|
|
endif()
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
endfunction()
|
|
|
|
|
|
2017-07-29 00:57:57 +00:00
|
|
|
set(test_targets pybind11_tests)
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
|
2017-07-29 00:57:57 +00:00
|
|
|
# Build pybind11_cross_module_tests if any test_whatever.py are being built that require it
|
|
|
|
|
foreach(t ${PYBIND11_CROSS_MODULE_TESTS})
|
|
|
|
|
list(FIND PYBIND11_PYTEST_FILES ${t} i)
|
2020-07-30 20:20:10 +00:00
|
|
|
if(i GREATER -1)
|
2017-07-29 00:57:57 +00:00
|
|
|
list(APPEND test_targets pybind11_cross_module_tests)
|
|
|
|
|
break()
|
|
|
|
|
endif()
|
|
|
|
|
endforeach()
|
2016-09-29 19:30:00 +00:00
|
|
|
|
2019-07-15 14:47:02 +00:00
|
|
|
foreach(t ${PYBIND11_CROSS_MODULE_GIL_TESTS})
|
|
|
|
|
list(FIND PYBIND11_PYTEST_FILES ${t} i)
|
2020-07-30 20:20:10 +00:00
|
|
|
if(i GREATER -1)
|
2019-07-15 14:47:02 +00:00
|
|
|
list(APPEND test_targets cross_module_gil_utils)
|
|
|
|
|
break()
|
|
|
|
|
endif()
|
|
|
|
|
endforeach()
|
|
|
|
|
|
Adding py::smart_holder (for smart-pointer interoperability). (#2672)
* Adding test_unique_ptr_member (for desired PyCLIF behavior).
See also: https://github.com/pybind/pybind11/issues/2583
Does not build with upstream master or
https://github.com/pybind/pybind11/pull/2047, but builds with
https://github.com/RobotLocomotion/pybind11 and almost runs:
```
Running tests in directory "/usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests":
================================================================================= test session starts =================================================================================
platform linux -- Python 3.8.5, pytest-5.4.3, py-1.9.0, pluggy-0.13.1
rootdir: /usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests, inifile: pytest.ini
collected 2 items
test_unique_ptr_member.py .F [100%]
====================================================================================== FAILURES =======================================================================================
_____________________________________________________________________________ test_pointee_and_ptr_owner ______________________________________________________________________________
def test_pointee_and_ptr_owner():
obj = m.pointee()
assert obj.get_int() == 213
m.ptr_owner(obj)
with pytest.raises(ValueError) as exc_info:
> obj.get_int()
E Failed: DID NOT RAISE <class 'ValueError'>
test_unique_ptr_member.py:17: Failed
============================================================================= 1 failed, 1 passed in 0.06s =============================================================================
```
* unique_ptr or shared_ptr return
* new test_variant_unique_shared with vptr_holder prototype
* moving prototype code to pybind11/vptr_holder.h, adding type_caster specialization to make the bindings involving unique_ptr passing compile, but load and cast implementations are missing
* disabling GitHub Actions on pull_request (for this PR)
* disabling AppVeyor (for this PR)
* TRIGGER_SEGSEV macro, annotations for GET_STACK (vptr::get), GET_INT_STACK (pointee)
* adding test_promotion_of_disowned_to_shared
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising returning and passing unique_ptr<T>, shared_ptr<T>
with unique_ptr, shared_ptr holder.
Observations:
test_holder_unique_ptr:
make_unique_pointee OK
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee Abort free(): double free detected
pass_shared_pointee RuntimeError: Unable to load a custom holder type from a default-holder instance
test_holder_shared_ptr:
make_unique_pointee Segmentation fault (#1138)
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee OK
pass_shared_pointee OK
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising casting between shared_ptr<base>, shared_ptr<derived>.
* Demonstration of Undefined Behavior in handling of shared_ptr holder.
Based on https://godbolt.org/z/4fdjaW by jorgbrown@ (thanks Jorg!).
* Additional demonstration of Undefined Behavior in handling of shared_ptr holder.
* fixing up-down mixup in comment
* Demonstration of Undefined Behavior in handling of polymorphic pointers.
(This demo does NOT involve smart pointers at all, unlike the otherwise similar test_smart_ptr_private_first_base.)
* minor test_private_first_base.cpp simplification (after discovering that this can be wrapped with Boost.Python, using boost::noncopyable)
* pybind11 equivalent of Boost.Python test similar to reproducer under #1333
* Snapshot of WIP, TODO: shared_ptr deleter with on/off switch
* Adding vptr_deleter.
* Adding from/as unique_ptr<T> and unique_ptr<T, D>.
* Adding from_shared_ptr. Some polishing.
* New tests/core/smart_holder_poc_test.cpp, using Catch2.
* Adding in vptr_deleter_guard_flag.
* Improved labeling of TEST_CASEs.
* Shuffling existing TEST_CASEs into systematic matrix.
* Implementing all [S]uccess tests.
* Implementing all [E]xception tests.
* Testing of exceptions not covered by the from-as matrix.
* Adding top-level comment.
* Converting from methods to factory functions (no functional change).
* Removing obsolete and very incomplete test (replaced by Catch2-based test).
* Removing stray file.
* Adding type_caster_bare_interface_demo.
* Adding shared_ptr<mpty>, shared_ptr<mpty const> casters.
* Adding unique_ptr<mpty>, unique_ptr<mpty const> casters.
* Pure copy of `class class_` implementation in pybind11.h (master commit 98f1bbb8004f654ba9e26717bdf5912fb899b05a).
* classh.h: renaming of class_ to classh + namespace; forking test_classh_wip from test_type_caster_bare_interface_demo.
* Hard-coding smart_holder into classh.
* Adding mpty::mtxt string member.
* Adding isinstance<mpty> in type_caster::load functions.
* Adding rvalue_ref, renaming const_value_ref to lvalue_ref & removing const.
* Retrieving smart_holder pointer in type_caster<mpty>::load, and using it cast_op operators.
* Factoring out smart_holder_type_caster_load.
* Retrieving smart_holder pointer in type_caster<std::shared_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Improved error messaging: Cannot disown nullptr (as_unique_ptr).
* Retrieving smart_holder pointer in type_caster<std::unique_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Pure `clang-format --style=file -i` change.
* Pure `clang-format --style=file -i` change, with two `clang-format off` directives.
* Fixing oversight (discovered by flake8).
* flake8 cleanup
* Systematically setting mtxt for all rtrn_mpty_* functions (preparation, the values are not actually used yet).
* static cast handle for rtrn_cptr works by simply dropping in code from type_caster_base (marked with comments).
* static cast handle for rtrn_cref works by simply dropping in code from type_caster_base (marked with comments). rtrn_mref and rtrn_mptr work via const_cast (to add const).
* static cast handle for rtrn_valu works by simply dropping in code from type_caster_base (marked with comments). rtrn_rref raises a RuntimeError, to be investigated.
* Copying type_caster_generic::cast into type_caster<mpty> as-is (preparation for handling smart pointers).
* Pure clang-format change (applied to original type_caster_generic::cast).
* Adding comment re potential use_count data race.
* static handle cast implementations for rtrn_shmp, rtrn_shcp.
* Adding MISSING comments in operator std::unique_ptr<mpty[ const]>.
* static handle cast implementations for rtrn_uqmp, rtrn_uqcp.
* Bug fix: vptr_deleter_armed_flag_ptr has to live on the heap.
See new bullet point in comment section near the top.
The variable was also renamed to reflect its function more accurately.
* Fixing bugs discovered by ASAN. The code is now ASAN, MSAN, UBSAN clean.
* Making test_type_caster_bare_interface_demo.cpp slightly more realistic, ASAN, MSAN, UBSAN clean.
* Calling deregister_instance after disowning via unique_ptr.
* Removing enable_shared_from_this stub, simplifying existing code, clang-format.
Open question, with respect to the original code:
https://github.com/pybind/pybind11/blob/76a160070b369f8d82b945c97924227e8b835c94/include/pybind11/pybind11.h#L1510
To me it looks like the exact situation marked as `std::shared_ptr<Good> gp1 = not_so_good.getptr();` here: https://en.cppreference.com/w/cpp/memory/enable_shared_from_this
The comment there is: `// undefined behavior (until C++17) and std::bad_weak_ptr thrown (since C++17)`
Does the existing code have UB pre C++17?
I'll leave handling of enable_shared_from_this for later, as the need arises.
* Cosmetical change around helper functions.
* Using type_caster_base<mpty>::src_and_type directly, removing copy. Also renaming one cast to cast_const_raw_ptr, for clarity.
* Fixing clang-format oversight.
* Using factored-out make_constructor (PR #2798), removing duplicate code.
* Inserting additional assert to ensure a returned unique_ptr is always a new Python instance.
* Adding minor comment (change to internals needed to distinguish uninitialized/disowned in error message).
* Factoring out find_existing_python_instance().
* Moving factored-out make_constructor to test_classh_wip.cpp, restoring previous version of cast.h. This is currently the most practical approach. See PR #2798 for background.
* Copying classh type_casters from test_classh_wip.cpp UNMODIFIED, as a baseline for generalizing the code.
* Using pybind11/detail/classh_type_casters.h from test_classh_wip.cpp.
* Adding & using PYBIND11_CLASSH_TYPE_CASTERS define.
* Adding test_classh_inheritance, currently failing (passes with class_).
* Removing .clang-format before git rebase master (where the file was added).
* Bringing back .clang-format, the previous rm was a bad idea.
* Folding in modified_type_caster_generic_load_impl, just enough to pass test_class_wip. test_classh_inheritance is still failing, but with a different error: [RuntimeError: Incompatible type (as_raw_ptr_unowned).]
* Minimal changes needed to pass test_classh_inheritance.
* First pass adjusting try_implicit_casts and try_load_foreign_module_local to capture loaded_v_h, but untested and guarded with pybind11_failure("Untested"). This was done mainly to determine general feasibility. Note the TODO in pybind11.h, where type_caster_generic::local_load is currently hard-coded. test_classh_wip and test_classh_inheritance still pass, as before.
* Decoupling generic_type from type_caster_generic.
* Changes and tests covering classh_type_casters try_implicit_casts.
* Minimal test covering classh_type_casters load_impl Case 2b.
* Removing stray isinstance<T>(src): it interferes with the py::module_local feature. Adding missing #includes.
* Tests for classh py::module_local() feature.
* Pure renaming of function names in test_classh_inheritance, similar to the systematic approach used in test_class_wip. NO functional changes.
* Pure renaming of function and variable names, for better generalization when convoluting with inheritance. NO functional changes.
* Adopting systematic naming scheme from test_classh_wip. NO functional changes.
* Moving const after type name, for functions that cover a systematic scheme. NO functional changes.
* Adding smart_holder_type_caster_load::loaded_as_shared_ptr, currently bypassing smart_holder shared_ptr tracking completely, but the tests pass and are sanitizer clean.
* Removing rtti_held from smart_holder. See updated comment.
* Cleaning up loaded_as_raw_ptr_unowned, loaded_as_shared_ptr.
* Factoring out convert_type and folding into loaded_as_unique_ptr.
* Folding convert_type into lvalue_ref and rvalue_ref paths. Some smart_holder_type_caster_load cleanup.
* Using unique_ptr in local_load to replace static variable. Also adding local_load_safety_guard.
* Converting test_unique_ptr_member to using classh: fully working, ASAN, MSAN, UBSAN clean.
* Removing debugging comments (GET_STACK, GET_INT_STACK). cast.h is identical to current master again, pybind11.h only has the generic_type::initialize(..., &type_caster_generic::local_load) change.
* Purging obsolete pybind11/vptr_holder.h and associated test.
* Moving several tests to github.com/rwgk/rwgk_tbx/tree/main/pybind11_tests
https://github.com/rwgk/rwgk_tbx/commit/a2c2f88174a30f5de80d7d26e0f77c7b60f5fb85
These tests are from experimenting, and for demonstrating UB in pybind11 multiple inheritance handling ("first_base"), to be fixed later.
* Adding py::smart_holder support to py::class_, purging py::classh completely.
* Renaming files in include directory, creating pybind11/smart_holder.h.
* Renaming all "classh" to "smart_holder" in pybind11/detail/smart_holder_type_casters.h.
The user-facing macro is now PYBIND11_SMART_HOLDER_TYPE_CASTERS.
* Systematically renaming tests to use "class_sh" in the name.
* Renaming test_type_caster_bare_interface_demo to test_type_caster_bare_interface.
* Renaming new tests/core subdirectory to tests/pure_cpp.
* Adding new tests to CMake config, resetting CI config.
* Changing CMake file so that test_class_sh_module_local.py actually runs.
* clang-tidy fixes.
* 32-bit compatibility.
* Reusing type_caster_base make_copy_constructor, make_move_constructor with a trick.
* CMake COMPARE NATURAL is not available with older versions.
* Adding copyright notices to new header files.
* Explicitly define copy/move constructors/assignments.
* Adding new header files to tests/extra_python_package/test_files.py.
* Adding tests/pure_cpp/CMakeLists.txt.
* Making use of the new find_existing_python_instance() function factored out with PR #2822.
* Moving define PYBIND11_SMART_HOLDER_TYPE_CASTERS(T) down in the file. NO functional changes. Preparation for follow-up work (to keep that diff smaller).
* Reintroducing py::classh, this time as a simple alias for py::class_<U, py::smart_holder>.
* Replacing detail::is_smart_holder<H> in cast.h with detail::is_smart_holder_type_caster<T>.
Moving get_local_load_function_ptr, init_instance_for_type to smart_holder_type_caster_class_hooks.
Expanding static_assert in py::type::handle_of<> to accommodate smart_holder_type_casters.
* Fixing oversight.
* Adding classu alias for class_<U, std::unique_ptr<U>>.
* Giving up on idea to use legacy init_instance only if is_base_of<type_caster_generic, type_caster<T>. There are use cases in the wild that define both a custom type_caster and class_.
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Moving up is_smart_holder_type_caster, to also use in cast_is_temporary_value_reference.
* Adding smart_holder_type_casters for unique_ptr with custom deleter. SEVERE CODE DUPLICATION. This commit is to establish a baseline for consolidating the unique_ptr code.
* Unification of unique_ptr, unique_ptr_with_deleter code in smart_holder_poc.h. Leads to more fitting error messages. Enables use of unique_ptr<T, D> smart_holder_type_casters also for unique_ptr<T>.
* Copying files as-is from branch test_unique_ptr_member (PR #2672).
* Adding comment, simplifying naming, cmake addition.
* Introducing PYBIND11_USE_SMART_HOLDER_AS_DEFAULT macro (tested only undefined; there are many errors with the macro defined).
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Fixing oversight introduced with commit 95425f13d6c14fcb6ee479b62b602dc8a605ec49.
* Setting record.default_holder correctly for PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
With this test_class.cpp builds and even mostly runs, except
`test_multiple_instances_with_same_pointer`, which segfaults because it is
using a `unique_ptr` holder but `smart_holder` `type_caster`.
Also adding `static_assert`s to generate build errors for such situations,
but guarding with `#if 0` to first pivot to test_factory_constructors.cpp.
* Fixing up cast.h and smart_holder.h after rebase.
* Removing detail/smart_holder_type_casters.h in separate commit.
* Commenting out const in def_buffer(... const). With this, test_buffers builds and runs with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT. Explanation why the const needs to be removed, or fix elsewhere, is still needed, but left for later.
* Adding test_class_sh_factory_constructors, reproducing test_factory_constructors failure. Using py::class_ in this commit, to be changed to py::classh for debugging.
* Removing include/pybind11/detail/smart_holder_type_casters.h from CMakeLists.txt, test_files.py (since it does not exist in this branch).
* Adding // DANGER ZONE reminders.
* Converting as many py::class_ to py::classh as possible, not breaking tests.
* Adding initimpl::construct() overloads, resulting in test_class_sh_factory_constructors feature parity for py::class_ and py::classh.
* Adding enable_if !is_smart_holder_type_caster to existing initimpl::construct(). With this test_factory_constructors.cpp builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Disabling shared_ptr&, shared_ptr* tests when building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT for now, pending work on smart_holder_type_caster<shared_ptr>.
* Factoring out struct and class definitions into anonymous namespace. Preparation for building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Simplifying from_unique_ptr(): typename D = std::default_delete<T> is not needed. Factoring out is_std_default_delete<T>() for consistentcy between ensure_compatible_rtti_uqp_del() and from_unique_ptr().
* Introducing PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. Using it in test_smart_ptr.cpp. With this test_smart_ptr builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT and all but one test run successfully.
* Introducing 1. type_caster_for_class_, used in PYBIND11_MAKE_OPAQUE, and 2. default_holder_type, used in stl_bind.h.
* Using __VA_ARGS__ in PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS.
* Replacing condense_for_macro with much simpler approach.
* Softening static_assert, to only check specifically that smart_holder is not mixed with type_caster_base, and unique_ptr/shared_ptr holders are not mixed with smart_holder_type_casters.
* Adding PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS in test_class.cpp (with this all but one test succeed with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT).
* Adding remaining PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. static_assert for "necessary conditions" for both types of default holder, static_assert for "strict conditions" guarded by new PYBIND11_STRICT_ASSERTS_CLASS_HOLDER_VS_TYPE_CASTER_MIX. All tests build & run as before with unique_ptr as the default holder, all tests build for smart_holder as the default holder, even with the strict static_assert.
* Introducing check_is_smart_holder_type_caster() function for runtime check, and reinterpreting record.default_holder as "uses_unique_ptr_holder". With this test_smart_ptr succeeds. (All 42 tests build, 35 tests succeed, 5 run but have some failures, 2 segfault.)
* Bug fix: Adding have_value() to smart_holder_type_caster_load. With this test_builtin_casters succeeds. (All 42 tests build, 36 tests succeed, 5 run but have some failures, 1 segfault.)
* Adding unowned_void_ptr_from_direct_conversion to modified_type_caster_generic_load_impl. This fixes the last remaining segfault (test_numpy_dtypes). New stats for all tests combined: 12 failed, 458 passed.
* Adding "Lazy allocation for unallocated values" (for old-style __init__) into load_value_and_holder. Deferring destruction of disowned holder until clear_instance, to remain inspectable for "uninitialized" or "disowned" detection. New stats for all tests combined: 5 failed, 465 passed.
* Changing std::shared_ptr pointer/reference to const pointer/reference. New stats for all tests combined: 4 failed, 466 passed.
* Adding return_value_policy::move to permissible policies for unique_ptr returns. New stats for all tests combined: 3 failed, 467 passed.
* Overlooked flake8 fixes.
* Manipulating failing ConstructorStats test to pass, to be able to run all tests with ASAN.
This version of the code is ASAN clean with unique_ptr or smart_holder as the default.
This change needs to be reverted after adopting the existing move-only-if-refcount-is-1
logic used by type_caster_base.
* Adding copy constructor and move constructor tracking to atyp. Preparation for a follow-up change in smart_holder_type_caster, to make this test sensitive to the changing behavior.
[skip ci]
* Removing `operator T&&() &&` from smart_holder_type_caster, for compatibility with the behavior of type_caster_base. Enables reverting 2 of 3 test manipulations applied under commit 249df7cbdb09817fed0ddf80f01ba5af12466820. The manipulation in test_factory_constructors.py is NOT reverted in this commit.
[skip ci]
* Fixing unfortunate editing mishap. This reverts the last remaining test manipulation in commit 249df7cbdb09817fed0ddf80f01ba5af12466820 and makes all existing unit tests pass with smart_holder as default holder.
* GitHub CI clang-tidy fixes.
* Adding messages to terse `static_assert`s, for pre-C++17 compatibility.
* Using @pytest.mark.parametrize to run each assert separately (to see all errors, not just the first).
* Systematically removing _atyp from function names, to make the test code simpler.
* Using re.match to accommodate variable number of intermediate MvCtor.
* Also removing `operator T()` from smart_holder_type_caster, to fix gcc compilation errors. The only loss is pass_rref in test_class_sh_basic.
* Systematically replacing `detail::enable_if_t<...smart_holder...>` with `typename std::enable_if<...smart_holder...>::type`. Attempt to work around MSVC 2015 issues, to be tested via GitHub CI. The idea for this change originates from this comment: https://github.com/pybind/pybind11/issues/1616#issuecomment-444536813
* Importing re before pytest after observing a PyPy CI flake when importing pytest first.
* Copying MSVC 2015 compatibility change from branch pr2672_use_smart_holder_as_default.
* Introducing is_smart_holder_type_caster_base_tag, to keep smart_holder code more disconnected.
* Working around MSVC 2015 bug.
* Expanding comment for MSVC 2015 workaround.
* Systematically changing std::enable_if back to detail::enable_if_t, effectively reverting commit 5d4b6890a337ae1bbaec4091f4195606f89a3b06.
* Removing unused smart_holder_type_caster_load::loaded_as_rvalue_ref (it was an oversight that it was not removed with commit 23036a45eb4731a06b488ec1fdf83bca677b7f67).
* Removing py::classu, because it does not seem useful enough.
* Reverting commit 63495313066119dcf7510c2ae8b468b46c12ef8f by un-commenting `const` in `def_buffer(...)`. To make this possible, `operator T const&` and `operator T const*` in `smart_holder_type_caster` need to be marked as `const` member functions.
* Adding construct() overloads for constructing smart_holder from alias unique_ptr, shared_ptr returns.
* Adding test_class_sh_factory_constructors.cpp to tests/CMakeLists.txt (fixes oversight, this should have been added long before).
* Compatibility with old clang versions (clang 3.6, 3.7 C++11).
* Cleaning up changes to existing unit tests.
* Systematically adding SMART_HOLDER_WIP tag. Removing minor UNTESTED tags (only the throw are not actually exercised, investing time there has a high cost but very little benefit).
* Splitting out smart_holder_type_casters again, into new detail/smart_holder_type_casters_inline_include.h.
* Splitting out smart_holder_init_inline_include.h.
* Adding additional new include files to CMakeLists.txt, tests/extra_python_package/test_files.py.
* clang-format cleanup of most smart_holder code.
* Adding source code comments in response to review.
* Simple micro-benchmark ("ubench") comparing runtime performance for several holders.
Tested using github.com/rwgk/pybind11_scons and Google-internal build system.
Sorry, no cmake support at the moment.
First results: https://docs.google.com/spreadsheets/d/1InapCYws2Gt-stmFf_Bwl33eOMo3aLE_gc9adveY7RU/edit#gid=0
* Breaking out number_bucket.h, adding hook for also collecting performance data for PyCLIF.
* Accounting for ubench in MANIFEST.in (simply prune, for now).
* Smarter determination of call_repetitions.
[skip ci]
* Also scaling performance data to PyCLIF.
[skip ci]
* Adding ubench/python/number_bucket.clif here for general visibility.
* Fix after rebase
* Merging detail/smart_holder_init_inline_include.h into detail/init.h.
* Renaming detail/is_smart_holder_type_caster.h -> detail/smart_holder_sfinae_hooks_only.h.
* Renaming is_smart_holder_type_caster -> type_uses_smart_holder_type_caster for clarity.
* Renaming type_caster_type_is_smart_holder_type_caster -> wrapped_type_uses_smart_holder_type_caster for clarity.
* Renaming is_smart_holder_type_caster_base_tag -> smart_holder_type_caster_base_tag for simplicity.
* Adding copyright notices and minor colateral cleanup.
* iwyu cleanup (comprehensive only for cast.h and smart_holder*.h files).
* Fixing `git rebase master` accident.
* Moving large `pragma warning` block from pybind11.h to detail/common.h.
* Fixing another `git rebase master` accident.
2021-02-24 05:50:42 +00:00
|
|
|
foreach(t ${PYBIND11_CLASS_SH_MODULE_LOCAL_TESTS})
|
|
|
|
|
list(FIND PYBIND11_PYTEST_FILES ${t} i)
|
|
|
|
|
if(i GREATER -1)
|
|
|
|
|
list(APPEND test_targets class_sh_module_local_0)
|
|
|
|
|
list(APPEND test_targets class_sh_module_local_1)
|
|
|
|
|
list(APPEND test_targets class_sh_module_local_2)
|
|
|
|
|
break()
|
|
|
|
|
endif()
|
|
|
|
|
endforeach()
|
|
|
|
|
|
2020-09-10 15:49:26 +00:00
|
|
|
# Support CUDA testing by forcing the target file to compile with NVCC
|
|
|
|
|
if(PYBIND11_CUDA_TESTS)
|
|
|
|
|
set_property(SOURCE ${PYBIND11_TEST_FILES} PROPERTY LANGUAGE CUDA)
|
|
|
|
|
endif()
|
|
|
|
|
|
2017-08-08 14:02:31 +00:00
|
|
|
foreach(target ${test_targets})
|
2017-07-29 00:57:57 +00:00
|
|
|
set(test_files ${PYBIND11_TEST_FILES})
|
2020-07-29 20:42:07 +00:00
|
|
|
if(NOT "${target}" STREQUAL "pybind11_tests")
|
2017-07-29 00:57:57 +00:00
|
|
|
set(test_files "")
|
|
|
|
|
endif()
|
2016-08-12 11:50:00 +00:00
|
|
|
|
2020-09-10 15:49:26 +00:00
|
|
|
# Support CUDA testing by forcing the target file to compile with NVCC
|
|
|
|
|
if(PYBIND11_CUDA_TESTS)
|
|
|
|
|
set_property(SOURCE ${target}.cpp PROPERTY LANGUAGE CUDA)
|
|
|
|
|
endif()
|
|
|
|
|
|
2017-07-29 00:57:57 +00:00
|
|
|
# Create the binding library
|
2017-08-08 14:02:31 +00:00
|
|
|
pybind11_add_module(${target} THIN_LTO ${target}.cpp ${test_files} ${PYBIND11_HEADERS})
|
|
|
|
|
pybind11_enable_warnings(${target})
|
2017-07-29 00:57:57 +00:00
|
|
|
|
2020-08-19 17:11:57 +00:00
|
|
|
if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
|
|
|
|
|
get_property(
|
|
|
|
|
suffix
|
|
|
|
|
TARGET ${target}
|
|
|
|
|
PROPERTY SUFFIX)
|
|
|
|
|
set(source_output "${CMAKE_CURRENT_SOURCE_DIR}/${target}${suffix}")
|
|
|
|
|
if(suffix AND EXISTS "${source_output}")
|
|
|
|
|
message(WARNING "Output file also in source directory; "
|
|
|
|
|
"please remove to avoid confusion: ${source_output}")
|
|
|
|
|
endif()
|
|
|
|
|
endif()
|
|
|
|
|
|
2017-07-29 00:57:57 +00:00
|
|
|
if(MSVC)
|
2017-08-08 14:02:31 +00:00
|
|
|
target_compile_options(${target} PRIVATE /utf-8)
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
endif()
|
2016-08-12 11:50:00 +00:00
|
|
|
|
2017-07-29 00:57:57 +00:00
|
|
|
if(EIGEN3_FOUND)
|
2020-08-19 16:26:26 +00:00
|
|
|
target_link_libraries(${target} PRIVATE Eigen3::Eigen)
|
2017-08-08 14:02:31 +00:00
|
|
|
target_compile_definitions(${target} PRIVATE -DPYBIND11_TEST_EIGEN)
|
|
|
|
|
endif()
|
|
|
|
|
|
|
|
|
|
if(Boost_FOUND)
|
2020-08-19 16:26:26 +00:00
|
|
|
target_link_libraries(${target} PRIVATE Boost::headers)
|
2017-08-08 14:02:31 +00:00
|
|
|
target_compile_definitions(${target} PRIVATE -DPYBIND11_TEST_BOOST)
|
2017-07-29 00:57:57 +00:00
|
|
|
endif()
|
2016-08-12 11:50:00 +00:00
|
|
|
|
2017-07-29 00:57:57 +00:00
|
|
|
# Always write the output file directly into the 'tests' directory (even on MSVC)
|
|
|
|
|
if(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY)
|
2020-08-19 17:11:57 +00:00
|
|
|
set_target_properties(${target} PROPERTIES LIBRARY_OUTPUT_DIRECTORY
|
|
|
|
|
"${CMAKE_CURRENT_BINARY_DIR}")
|
2021-01-19 23:48:22 +00:00
|
|
|
|
|
|
|
|
if(DEFINED CMAKE_CONFIGURATION_TYPES)
|
|
|
|
|
foreach(config ${CMAKE_CONFIGURATION_TYPES})
|
|
|
|
|
string(TOUPPER ${config} config)
|
|
|
|
|
set_target_properties(${target} PROPERTIES LIBRARY_OUTPUT_DIRECTORY_${config}
|
|
|
|
|
"${CMAKE_CURRENT_BINARY_DIR}")
|
|
|
|
|
endforeach()
|
|
|
|
|
endif()
|
2017-07-29 00:57:57 +00:00
|
|
|
endif()
|
|
|
|
|
endforeach()
|
2016-08-12 11:50:00 +00:00
|
|
|
|
2020-09-12 02:06:52 +00:00
|
|
|
# Make sure pytest is found or produce a warning
|
2020-10-03 02:34:22 +00:00
|
|
|
pybind11_find_import(pytest VERSION 3.1)
|
2016-08-13 00:44:56 +00:00
|
|
|
|
2020-08-19 17:11:57 +00:00
|
|
|
if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
|
|
|
|
|
# This is not used later in the build, so it's okay to regenerate each time.
|
|
|
|
|
configure_file("${CMAKE_CURRENT_SOURCE_DIR}/pytest.ini" "${CMAKE_CURRENT_BINARY_DIR}/pytest.ini"
|
|
|
|
|
COPYONLY)
|
|
|
|
|
file(APPEND "${CMAKE_CURRENT_BINARY_DIR}/pytest.ini"
|
|
|
|
|
"\ntestpaths = \"${CMAKE_CURRENT_SOURCE_DIR}\"")
|
|
|
|
|
|
|
|
|
|
endif()
|
|
|
|
|
|
|
|
|
|
# cmake 3.12 added list(transform <list> prepend
|
|
|
|
|
# but we can't use it yet
|
2020-09-22 16:01:15 +00:00
|
|
|
string(REPLACE "test_" "${CMAKE_CURRENT_SOURCE_DIR}/test_" PYBIND11_ABS_PYTEST_FILES
|
2020-08-19 17:11:57 +00:00
|
|
|
"${PYBIND11_PYTEST_FILES}")
|
|
|
|
|
|
2021-01-15 20:07:31 +00:00
|
|
|
set(PYBIND11_TEST_PREFIX_COMMAND
|
|
|
|
|
""
|
|
|
|
|
CACHE STRING "Put this before pytest, use for checkers and such")
|
|
|
|
|
|
2016-08-12 11:50:00 +00:00
|
|
|
# A single command to compile and run the tests
|
2020-07-30 20:20:10 +00:00
|
|
|
add_custom_target(
|
|
|
|
|
pytest
|
2021-01-15 20:07:31 +00:00
|
|
|
COMMAND ${PYBIND11_TEST_PREFIX_COMMAND} ${PYTHON_EXECUTABLE} -m pytest
|
|
|
|
|
${PYBIND11_ABS_PYTEST_FILES}
|
2020-07-30 20:20:10 +00:00
|
|
|
DEPENDS ${test_targets}
|
2021-01-15 20:07:31 +00:00
|
|
|
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}"
|
2020-07-30 20:20:10 +00:00
|
|
|
USES_TERMINAL)
|
2016-11-04 13:47:41 +00:00
|
|
|
|
2016-11-13 00:10:53 +00:00
|
|
|
if(PYBIND11_TEST_OVERRIDE)
|
2020-07-30 20:20:10 +00:00
|
|
|
add_custom_command(
|
|
|
|
|
TARGET pytest
|
|
|
|
|
POST_BUILD
|
|
|
|
|
COMMAND ${CMAKE_COMMAND} -E echo
|
|
|
|
|
"Note: not all tests run: -DPYBIND11_TEST_OVERRIDE is in effect")
|
2016-11-13 00:10:53 +00:00
|
|
|
endif()
|
|
|
|
|
|
2021-01-15 20:07:31 +00:00
|
|
|
# cmake-format: off
|
|
|
|
|
add_custom_target(
|
|
|
|
|
memcheck
|
|
|
|
|
COMMAND
|
|
|
|
|
PYTHONMALLOC=malloc
|
|
|
|
|
valgrind
|
|
|
|
|
--leak-check=full
|
|
|
|
|
--show-leak-kinds=definite,indirect
|
|
|
|
|
--errors-for-leak-kinds=definite,indirect
|
|
|
|
|
--error-exitcode=1
|
|
|
|
|
--read-var-info=yes
|
|
|
|
|
--track-origins=yes
|
|
|
|
|
--suppressions="${CMAKE_CURRENT_SOURCE_DIR}/valgrind-python.supp"
|
|
|
|
|
--suppressions="${CMAKE_CURRENT_SOURCE_DIR}/valgrind-numpy-scipy.supp"
|
|
|
|
|
--gen-suppressions=all
|
|
|
|
|
${PYTHON_EXECUTABLE} -m pytest ${PYBIND11_ABS_PYTEST_FILES}
|
|
|
|
|
DEPENDS ${test_targets}
|
|
|
|
|
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}"
|
|
|
|
|
USES_TERMINAL)
|
|
|
|
|
# cmake-format: on
|
|
|
|
|
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
# Add a check target to run all the tests, starting with pytest (we add dependencies to this below)
|
|
|
|
|
add_custom_target(check DEPENDS pytest)
|
|
|
|
|
|
|
|
|
|
# The remaining tests only apply when being built as part of the pybind11 project, but not if the
|
|
|
|
|
# tests are being built independently.
|
2020-07-28 04:43:12 +00:00
|
|
|
if(CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_SOURCE_DIR)
|
Independent tests (#665)
* Make tests buildable independently
This makes "tests" buildable as a separate project that uses
find_package(pybind11 CONFIG) when invoked independently.
This also moves the WERROR option into tests/CMakeLists.txt, as that's
the only place it is used.
* Use Eigen 3.3.1's cmake target, if available
This changes the eigen finding code to attempt to use Eigen's
system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake
Eigen3::Eigen target to get dependencies from (rather than setting the
include path directly).
If it fails, we fall back to the trying to load allowing modules (i.e.
allowing our tools/FindEigen3.cmake). If we either fallback, or the
eigen version is older than 3.3.1 (or , we still set the include
directory manually; otherwise, for CONFIG + new Eigen, we get it via
the target.
This is also needed to allow 'tests' to be built independently, when
the find_package(Eigen3) is going to find via the system-installed
Eigen3Config.cmake.
* Add a install-then-build test, using clang on linux
This tests that `make install` to the actual system, followed by a build
of the tests (without the main pybind11 repository available) works as
expected.
To also expand the testing variety a bit, it also builds using
clang-3.9 instead of gcc.
* Don't try loading Eigen3Config in cmake < 3.0
It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required
line.
If doing an independent, out-of-tree "tests" build, the regular
find_package(Eigen3) is likely to fail with the same error, but I think
we can just let that be: if you want a recent Eigen with proper cmake
loading support *and* want to do an independent tests build, you'll
need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
|
|
|
return()
|
|
|
|
|
endif()
|
|
|
|
|
|
2017-07-29 00:57:57 +00:00
|
|
|
# Add a post-build comment to show the primary test suite .so size and, if a previous size, compare it:
|
2020-07-28 04:43:12 +00:00
|
|
|
add_custom_command(
|
2020-07-30 20:20:10 +00:00
|
|
|
TARGET pybind11_tests
|
|
|
|
|
POST_BUILD
|
|
|
|
|
COMMAND
|
|
|
|
|
${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/../tools/libsize.py
|
2020-07-28 04:43:12 +00:00
|
|
|
$<TARGET_FILE:pybind11_tests>
|
|
|
|
|
${CMAKE_CURRENT_BINARY_DIR}/sosize-$<TARGET_FILE_NAME:pybind11_tests>.txt)
|
2016-12-14 00:43:39 +00:00
|
|
|
|
2020-09-10 15:49:26 +00:00
|
|
|
if(NOT PYBIND11_CUDA_TESTS)
|
Adding py::smart_holder (for smart-pointer interoperability). (#2672)
* Adding test_unique_ptr_member (for desired PyCLIF behavior).
See also: https://github.com/pybind/pybind11/issues/2583
Does not build with upstream master or
https://github.com/pybind/pybind11/pull/2047, but builds with
https://github.com/RobotLocomotion/pybind11 and almost runs:
```
Running tests in directory "/usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests":
================================================================================= test session starts =================================================================================
platform linux -- Python 3.8.5, pytest-5.4.3, py-1.9.0, pluggy-0.13.1
rootdir: /usr/local/google/home/rwgk/forked/EricCousineau-TRI/pybind11/tests, inifile: pytest.ini
collected 2 items
test_unique_ptr_member.py .F [100%]
====================================================================================== FAILURES =======================================================================================
_____________________________________________________________________________ test_pointee_and_ptr_owner ______________________________________________________________________________
def test_pointee_and_ptr_owner():
obj = m.pointee()
assert obj.get_int() == 213
m.ptr_owner(obj)
with pytest.raises(ValueError) as exc_info:
> obj.get_int()
E Failed: DID NOT RAISE <class 'ValueError'>
test_unique_ptr_member.py:17: Failed
============================================================================= 1 failed, 1 passed in 0.06s =============================================================================
```
* unique_ptr or shared_ptr return
* new test_variant_unique_shared with vptr_holder prototype
* moving prototype code to pybind11/vptr_holder.h, adding type_caster specialization to make the bindings involving unique_ptr passing compile, but load and cast implementations are missing
* disabling GitHub Actions on pull_request (for this PR)
* disabling AppVeyor (for this PR)
* TRIGGER_SEGSEV macro, annotations for GET_STACK (vptr::get), GET_INT_STACK (pointee)
* adding test_promotion_of_disowned_to_shared
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising returning and passing unique_ptr<T>, shared_ptr<T>
with unique_ptr, shared_ptr holder.
Observations:
test_holder_unique_ptr:
make_unique_pointee OK
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee Abort free(): double free detected
pass_shared_pointee RuntimeError: Unable to load a custom holder type from a default-holder instance
test_holder_shared_ptr:
make_unique_pointee Segmentation fault (#1138)
pass_unique_pointee BUILD_FAIL (as documented)
make_shared_pointee OK
pass_shared_pointee OK
* Copying tests as-is from xxx_value_ptr_xxx_holder branch.
https://github.com/rwgk/pybind11/tree/xxx_value_ptr_xxx_holder
Systematically exercising casting between shared_ptr<base>, shared_ptr<derived>.
* Demonstration of Undefined Behavior in handling of shared_ptr holder.
Based on https://godbolt.org/z/4fdjaW by jorgbrown@ (thanks Jorg!).
* Additional demonstration of Undefined Behavior in handling of shared_ptr holder.
* fixing up-down mixup in comment
* Demonstration of Undefined Behavior in handling of polymorphic pointers.
(This demo does NOT involve smart pointers at all, unlike the otherwise similar test_smart_ptr_private_first_base.)
* minor test_private_first_base.cpp simplification (after discovering that this can be wrapped with Boost.Python, using boost::noncopyable)
* pybind11 equivalent of Boost.Python test similar to reproducer under #1333
* Snapshot of WIP, TODO: shared_ptr deleter with on/off switch
* Adding vptr_deleter.
* Adding from/as unique_ptr<T> and unique_ptr<T, D>.
* Adding from_shared_ptr. Some polishing.
* New tests/core/smart_holder_poc_test.cpp, using Catch2.
* Adding in vptr_deleter_guard_flag.
* Improved labeling of TEST_CASEs.
* Shuffling existing TEST_CASEs into systematic matrix.
* Implementing all [S]uccess tests.
* Implementing all [E]xception tests.
* Testing of exceptions not covered by the from-as matrix.
* Adding top-level comment.
* Converting from methods to factory functions (no functional change).
* Removing obsolete and very incomplete test (replaced by Catch2-based test).
* Removing stray file.
* Adding type_caster_bare_interface_demo.
* Adding shared_ptr<mpty>, shared_ptr<mpty const> casters.
* Adding unique_ptr<mpty>, unique_ptr<mpty const> casters.
* Pure copy of `class class_` implementation in pybind11.h (master commit 98f1bbb8004f654ba9e26717bdf5912fb899b05a).
* classh.h: renaming of class_ to classh + namespace; forking test_classh_wip from test_type_caster_bare_interface_demo.
* Hard-coding smart_holder into classh.
* Adding mpty::mtxt string member.
* Adding isinstance<mpty> in type_caster::load functions.
* Adding rvalue_ref, renaming const_value_ref to lvalue_ref & removing const.
* Retrieving smart_holder pointer in type_caster<mpty>::load, and using it cast_op operators.
* Factoring out smart_holder_type_caster_load.
* Retrieving smart_holder pointer in type_caster<std::shared_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Improved error messaging: Cannot disown nullptr (as_unique_ptr).
* Retrieving smart_holder pointer in type_caster<std::unique_ptr<mpty[ const]>>::load, and using it cast_op operators.
* Pure `clang-format --style=file -i` change.
* Pure `clang-format --style=file -i` change, with two `clang-format off` directives.
* Fixing oversight (discovered by flake8).
* flake8 cleanup
* Systematically setting mtxt for all rtrn_mpty_* functions (preparation, the values are not actually used yet).
* static cast handle for rtrn_cptr works by simply dropping in code from type_caster_base (marked with comments).
* static cast handle for rtrn_cref works by simply dropping in code from type_caster_base (marked with comments). rtrn_mref and rtrn_mptr work via const_cast (to add const).
* static cast handle for rtrn_valu works by simply dropping in code from type_caster_base (marked with comments). rtrn_rref raises a RuntimeError, to be investigated.
* Copying type_caster_generic::cast into type_caster<mpty> as-is (preparation for handling smart pointers).
* Pure clang-format change (applied to original type_caster_generic::cast).
* Adding comment re potential use_count data race.
* static handle cast implementations for rtrn_shmp, rtrn_shcp.
* Adding MISSING comments in operator std::unique_ptr<mpty[ const]>.
* static handle cast implementations for rtrn_uqmp, rtrn_uqcp.
* Bug fix: vptr_deleter_armed_flag_ptr has to live on the heap.
See new bullet point in comment section near the top.
The variable was also renamed to reflect its function more accurately.
* Fixing bugs discovered by ASAN. The code is now ASAN, MSAN, UBSAN clean.
* Making test_type_caster_bare_interface_demo.cpp slightly more realistic, ASAN, MSAN, UBSAN clean.
* Calling deregister_instance after disowning via unique_ptr.
* Removing enable_shared_from_this stub, simplifying existing code, clang-format.
Open question, with respect to the original code:
https://github.com/pybind/pybind11/blob/76a160070b369f8d82b945c97924227e8b835c94/include/pybind11/pybind11.h#L1510
To me it looks like the exact situation marked as `std::shared_ptr<Good> gp1 = not_so_good.getptr();` here: https://en.cppreference.com/w/cpp/memory/enable_shared_from_this
The comment there is: `// undefined behavior (until C++17) and std::bad_weak_ptr thrown (since C++17)`
Does the existing code have UB pre C++17?
I'll leave handling of enable_shared_from_this for later, as the need arises.
* Cosmetical change around helper functions.
* Using type_caster_base<mpty>::src_and_type directly, removing copy. Also renaming one cast to cast_const_raw_ptr, for clarity.
* Fixing clang-format oversight.
* Using factored-out make_constructor (PR #2798), removing duplicate code.
* Inserting additional assert to ensure a returned unique_ptr is always a new Python instance.
* Adding minor comment (change to internals needed to distinguish uninitialized/disowned in error message).
* Factoring out find_existing_python_instance().
* Moving factored-out make_constructor to test_classh_wip.cpp, restoring previous version of cast.h. This is currently the most practical approach. See PR #2798 for background.
* Copying classh type_casters from test_classh_wip.cpp UNMODIFIED, as a baseline for generalizing the code.
* Using pybind11/detail/classh_type_casters.h from test_classh_wip.cpp.
* Adding & using PYBIND11_CLASSH_TYPE_CASTERS define.
* Adding test_classh_inheritance, currently failing (passes with class_).
* Removing .clang-format before git rebase master (where the file was added).
* Bringing back .clang-format, the previous rm was a bad idea.
* Folding in modified_type_caster_generic_load_impl, just enough to pass test_class_wip. test_classh_inheritance is still failing, but with a different error: [RuntimeError: Incompatible type (as_raw_ptr_unowned).]
* Minimal changes needed to pass test_classh_inheritance.
* First pass adjusting try_implicit_casts and try_load_foreign_module_local to capture loaded_v_h, but untested and guarded with pybind11_failure("Untested"). This was done mainly to determine general feasibility. Note the TODO in pybind11.h, where type_caster_generic::local_load is currently hard-coded. test_classh_wip and test_classh_inheritance still pass, as before.
* Decoupling generic_type from type_caster_generic.
* Changes and tests covering classh_type_casters try_implicit_casts.
* Minimal test covering classh_type_casters load_impl Case 2b.
* Removing stray isinstance<T>(src): it interferes with the py::module_local feature. Adding missing #includes.
* Tests for classh py::module_local() feature.
* Pure renaming of function names in test_classh_inheritance, similar to the systematic approach used in test_class_wip. NO functional changes.
* Pure renaming of function and variable names, for better generalization when convoluting with inheritance. NO functional changes.
* Adopting systematic naming scheme from test_classh_wip. NO functional changes.
* Moving const after type name, for functions that cover a systematic scheme. NO functional changes.
* Adding smart_holder_type_caster_load::loaded_as_shared_ptr, currently bypassing smart_holder shared_ptr tracking completely, but the tests pass and are sanitizer clean.
* Removing rtti_held from smart_holder. See updated comment.
* Cleaning up loaded_as_raw_ptr_unowned, loaded_as_shared_ptr.
* Factoring out convert_type and folding into loaded_as_unique_ptr.
* Folding convert_type into lvalue_ref and rvalue_ref paths. Some smart_holder_type_caster_load cleanup.
* Using unique_ptr in local_load to replace static variable. Also adding local_load_safety_guard.
* Converting test_unique_ptr_member to using classh: fully working, ASAN, MSAN, UBSAN clean.
* Removing debugging comments (GET_STACK, GET_INT_STACK). cast.h is identical to current master again, pybind11.h only has the generic_type::initialize(..., &type_caster_generic::local_load) change.
* Purging obsolete pybind11/vptr_holder.h and associated test.
* Moving several tests to github.com/rwgk/rwgk_tbx/tree/main/pybind11_tests
https://github.com/rwgk/rwgk_tbx/commit/a2c2f88174a30f5de80d7d26e0f77c7b60f5fb85
These tests are from experimenting, and for demonstrating UB in pybind11 multiple inheritance handling ("first_base"), to be fixed later.
* Adding py::smart_holder support to py::class_, purging py::classh completely.
* Renaming files in include directory, creating pybind11/smart_holder.h.
* Renaming all "classh" to "smart_holder" in pybind11/detail/smart_holder_type_casters.h.
The user-facing macro is now PYBIND11_SMART_HOLDER_TYPE_CASTERS.
* Systematically renaming tests to use "class_sh" in the name.
* Renaming test_type_caster_bare_interface_demo to test_type_caster_bare_interface.
* Renaming new tests/core subdirectory to tests/pure_cpp.
* Adding new tests to CMake config, resetting CI config.
* Changing CMake file so that test_class_sh_module_local.py actually runs.
* clang-tidy fixes.
* 32-bit compatibility.
* Reusing type_caster_base make_copy_constructor, make_move_constructor with a trick.
* CMake COMPARE NATURAL is not available with older versions.
* Adding copyright notices to new header files.
* Explicitly define copy/move constructors/assignments.
* Adding new header files to tests/extra_python_package/test_files.py.
* Adding tests/pure_cpp/CMakeLists.txt.
* Making use of the new find_existing_python_instance() function factored out with PR #2822.
* Moving define PYBIND11_SMART_HOLDER_TYPE_CASTERS(T) down in the file. NO functional changes. Preparation for follow-up work (to keep that diff smaller).
* Reintroducing py::classh, this time as a simple alias for py::class_<U, py::smart_holder>.
* Replacing detail::is_smart_holder<H> in cast.h with detail::is_smart_holder_type_caster<T>.
Moving get_local_load_function_ptr, init_instance_for_type to smart_holder_type_caster_class_hooks.
Expanding static_assert in py::type::handle_of<> to accommodate smart_holder_type_casters.
* Fixing oversight.
* Adding classu alias for class_<U, std::unique_ptr<U>>.
* Giving up on idea to use legacy init_instance only if is_base_of<type_caster_generic, type_caster<T>. There are use cases in the wild that define both a custom type_caster and class_.
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Moving up is_smart_holder_type_caster, to also use in cast_is_temporary_value_reference.
* Adding smart_holder_type_casters for unique_ptr with custom deleter. SEVERE CODE DUPLICATION. This commit is to establish a baseline for consolidating the unique_ptr code.
* Unification of unique_ptr, unique_ptr_with_deleter code in smart_holder_poc.h. Leads to more fitting error messages. Enables use of unique_ptr<T, D> smart_holder_type_casters also for unique_ptr<T>.
* Copying files as-is from branch test_unique_ptr_member (PR #2672).
* Adding comment, simplifying naming, cmake addition.
* Introducing PYBIND11_USE_SMART_HOLDER_AS_DEFAULT macro (tested only undefined; there are many errors with the macro defined).
* Removing test_type_caster_bare_interface, which was moved to the separate PR #2834.
* Fixing oversight introduced with commit 95425f13d6c14fcb6ee479b62b602dc8a605ec49.
* Setting record.default_holder correctly for PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
With this test_class.cpp builds and even mostly runs, except
`test_multiple_instances_with_same_pointer`, which segfaults because it is
using a `unique_ptr` holder but `smart_holder` `type_caster`.
Also adding `static_assert`s to generate build errors for such situations,
but guarding with `#if 0` to first pivot to test_factory_constructors.cpp.
* Fixing up cast.h and smart_holder.h after rebase.
* Removing detail/smart_holder_type_casters.h in separate commit.
* Commenting out const in def_buffer(... const). With this, test_buffers builds and runs with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT. Explanation why the const needs to be removed, or fix elsewhere, is still needed, but left for later.
* Adding test_class_sh_factory_constructors, reproducing test_factory_constructors failure. Using py::class_ in this commit, to be changed to py::classh for debugging.
* Removing include/pybind11/detail/smart_holder_type_casters.h from CMakeLists.txt, test_files.py (since it does not exist in this branch).
* Adding // DANGER ZONE reminders.
* Converting as many py::class_ to py::classh as possible, not breaking tests.
* Adding initimpl::construct() overloads, resulting in test_class_sh_factory_constructors feature parity for py::class_ and py::classh.
* Adding enable_if !is_smart_holder_type_caster to existing initimpl::construct(). With this test_factory_constructors.cpp builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Disabling shared_ptr&, shared_ptr* tests when building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT for now, pending work on smart_holder_type_caster<shared_ptr>.
* Factoring out struct and class definitions into anonymous namespace. Preparation for building with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT.
* Simplifying from_unique_ptr(): typename D = std::default_delete<T> is not needed. Factoring out is_std_default_delete<T>() for consistentcy between ensure_compatible_rtti_uqp_del() and from_unique_ptr().
* Introducing PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. Using it in test_smart_ptr.cpp. With this test_smart_ptr builds with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT and all but one test run successfully.
* Introducing 1. type_caster_for_class_, used in PYBIND11_MAKE_OPAQUE, and 2. default_holder_type, used in stl_bind.h.
* Using __VA_ARGS__ in PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS.
* Replacing condense_for_macro with much simpler approach.
* Softening static_assert, to only check specifically that smart_holder is not mixed with type_caster_base, and unique_ptr/shared_ptr holders are not mixed with smart_holder_type_casters.
* Adding PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS in test_class.cpp (with this all but one test succeed with PYBIND11_USE_SMART_HOLDER_AS_DEFAULT).
* Adding remaining PYBIND11_SMART_POINTER_HOLDER_TYPE_CASTERS. static_assert for "necessary conditions" for both types of default holder, static_assert for "strict conditions" guarded by new PYBIND11_STRICT_ASSERTS_CLASS_HOLDER_VS_TYPE_CASTER_MIX. All tests build & run as before with unique_ptr as the default holder, all tests build for smart_holder as the default holder, even with the strict static_assert.
* Introducing check_is_smart_holder_type_caster() function for runtime check, and reinterpreting record.default_holder as "uses_unique_ptr_holder". With this test_smart_ptr succeeds. (All 42 tests build, 35 tests succeed, 5 run but have some failures, 2 segfault.)
* Bug fix: Adding have_value() to smart_holder_type_caster_load. With this test_builtin_casters succeeds. (All 42 tests build, 36 tests succeed, 5 run but have some failures, 1 segfault.)
* Adding unowned_void_ptr_from_direct_conversion to modified_type_caster_generic_load_impl. This fixes the last remaining segfault (test_numpy_dtypes). New stats for all tests combined: 12 failed, 458 passed.
* Adding "Lazy allocation for unallocated values" (for old-style __init__) into load_value_and_holder. Deferring destruction of disowned holder until clear_instance, to remain inspectable for "uninitialized" or "disowned" detection. New stats for all tests combined: 5 failed, 465 passed.
* Changing std::shared_ptr pointer/reference to const pointer/reference. New stats for all tests combined: 4 failed, 466 passed.
* Adding return_value_policy::move to permissible policies for unique_ptr returns. New stats for all tests combined: 3 failed, 467 passed.
* Overlooked flake8 fixes.
* Manipulating failing ConstructorStats test to pass, to be able to run all tests with ASAN.
This version of the code is ASAN clean with unique_ptr or smart_holder as the default.
This change needs to be reverted after adopting the existing move-only-if-refcount-is-1
logic used by type_caster_base.
* Adding copy constructor and move constructor tracking to atyp. Preparation for a follow-up change in smart_holder_type_caster, to make this test sensitive to the changing behavior.
[skip ci]
* Removing `operator T&&() &&` from smart_holder_type_caster, for compatibility with the behavior of type_caster_base. Enables reverting 2 of 3 test manipulations applied under commit 249df7cbdb09817fed0ddf80f01ba5af12466820. The manipulation in test_factory_constructors.py is NOT reverted in this commit.
[skip ci]
* Fixing unfortunate editing mishap. This reverts the last remaining test manipulation in commit 249df7cbdb09817fed0ddf80f01ba5af12466820 and makes all existing unit tests pass with smart_holder as default holder.
* GitHub CI clang-tidy fixes.
* Adding messages to terse `static_assert`s, for pre-C++17 compatibility.
* Using @pytest.mark.parametrize to run each assert separately (to see all errors, not just the first).
* Systematically removing _atyp from function names, to make the test code simpler.
* Using re.match to accommodate variable number of intermediate MvCtor.
* Also removing `operator T()` from smart_holder_type_caster, to fix gcc compilation errors. The only loss is pass_rref in test_class_sh_basic.
* Systematically replacing `detail::enable_if_t<...smart_holder...>` with `typename std::enable_if<...smart_holder...>::type`. Attempt to work around MSVC 2015 issues, to be tested via GitHub CI. The idea for this change originates from this comment: https://github.com/pybind/pybind11/issues/1616#issuecomment-444536813
* Importing re before pytest after observing a PyPy CI flake when importing pytest first.
* Copying MSVC 2015 compatibility change from branch pr2672_use_smart_holder_as_default.
* Introducing is_smart_holder_type_caster_base_tag, to keep smart_holder code more disconnected.
* Working around MSVC 2015 bug.
* Expanding comment for MSVC 2015 workaround.
* Systematically changing std::enable_if back to detail::enable_if_t, effectively reverting commit 5d4b6890a337ae1bbaec4091f4195606f89a3b06.
* Removing unused smart_holder_type_caster_load::loaded_as_rvalue_ref (it was an oversight that it was not removed with commit 23036a45eb4731a06b488ec1fdf83bca677b7f67).
* Removing py::classu, because it does not seem useful enough.
* Reverting commit 63495313066119dcf7510c2ae8b468b46c12ef8f by un-commenting `const` in `def_buffer(...)`. To make this possible, `operator T const&` and `operator T const*` in `smart_holder_type_caster` need to be marked as `const` member functions.
* Adding construct() overloads for constructing smart_holder from alias unique_ptr, shared_ptr returns.
* Adding test_class_sh_factory_constructors.cpp to tests/CMakeLists.txt (fixes oversight, this should have been added long before).
* Compatibility with old clang versions (clang 3.6, 3.7 C++11).
* Cleaning up changes to existing unit tests.
* Systematically adding SMART_HOLDER_WIP tag. Removing minor UNTESTED tags (only the throw are not actually exercised, investing time there has a high cost but very little benefit).
* Splitting out smart_holder_type_casters again, into new detail/smart_holder_type_casters_inline_include.h.
* Splitting out smart_holder_init_inline_include.h.
* Adding additional new include files to CMakeLists.txt, tests/extra_python_package/test_files.py.
* clang-format cleanup of most smart_holder code.
* Adding source code comments in response to review.
* Simple micro-benchmark ("ubench") comparing runtime performance for several holders.
Tested using github.com/rwgk/pybind11_scons and Google-internal build system.
Sorry, no cmake support at the moment.
First results: https://docs.google.com/spreadsheets/d/1InapCYws2Gt-stmFf_Bwl33eOMo3aLE_gc9adveY7RU/edit#gid=0
* Breaking out number_bucket.h, adding hook for also collecting performance data for PyCLIF.
* Accounting for ubench in MANIFEST.in (simply prune, for now).
* Smarter determination of call_repetitions.
[skip ci]
* Also scaling performance data to PyCLIF.
[skip ci]
* Adding ubench/python/number_bucket.clif here for general visibility.
* Fix after rebase
* Merging detail/smart_holder_init_inline_include.h into detail/init.h.
* Renaming detail/is_smart_holder_type_caster.h -> detail/smart_holder_sfinae_hooks_only.h.
* Renaming is_smart_holder_type_caster -> type_uses_smart_holder_type_caster for clarity.
* Renaming type_caster_type_is_smart_holder_type_caster -> wrapped_type_uses_smart_holder_type_caster for clarity.
* Renaming is_smart_holder_type_caster_base_tag -> smart_holder_type_caster_base_tag for simplicity.
* Adding copyright notices and minor colateral cleanup.
* iwyu cleanup (comprehensive only for cast.h and smart_holder*.h files).
* Fixing `git rebase master` accident.
* Moving large `pragma warning` block from pybind11.h to detail/common.h.
* Fixing another `git rebase master` accident.
2021-02-24 05:50:42 +00:00
|
|
|
# Test pure C++ code (not depending on Python). Provides the `test_pure_cpp` target.
|
|
|
|
|
add_subdirectory(pure_cpp)
|
|
|
|
|
|
2020-09-10 15:49:26 +00:00
|
|
|
# Test embedding the interpreter. Provides the `cpptest` target.
|
|
|
|
|
add_subdirectory(test_embed)
|
2017-03-23 16:27:32 +00:00
|
|
|
|
2020-09-10 15:49:26 +00:00
|
|
|
# Test CMake build using functions and targets from subdirectory or installed location
|
|
|
|
|
add_subdirectory(test_cmake_build)
|
|
|
|
|
endif()
|
