Zengtudor/pybind11
1
0
Fork 0
mirror of https://github.com/pybind/pybind11.git synced 2024-11-23 05:35:13 +00:00
Code Issues Packages Projects Releases Wiki Activity
dc5ce5930f
pybind11/tests/CMakeLists.txt

239 lines
8.8 KiB
CMake
Raw Normal View History

Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# CMakeLists.txt -- Build system for the pybind11 test suite
#
# Copyright (c) 2015 Wenzel Jakob <wenzel@inf.ethz.ch>
#
# All rights reserved. Use of this source code is governed by a
# BSD-style license that can be found in the LICENSE file.
cmake_minimum_required(VERSION 2.8.12)
option(PYBIND11_WERROR "Report all warnings as errors" OFF)
if (CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_SOURCE_DIR)
# We're being loaded directly, i.e. not via add_subdirectory, so make this
# work as its own project and load the pybind11Config to get the tools we need
project(pybind11_tests)
find_package(pybind11 REQUIRED CONFIG)
endif()
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
message(STATUS "Setting tests build type to MinSizeRel as none was specified")
set possible build types in cmake build system
2016-09-17 10:58:18 +00:00
set(CMAKE_BUILD_TYPE MinSizeRel CACHE STRING "Choose the type of build." FORCE)
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release"
"MinSizeRel" "RelWithDebInfo")
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
endif()
Add cmake option to override tests (#489) When working on some particular feature, it's nice to be able to disable all the tests except for the one I'm working on; this is currently possible by editing tests/CMakeLists.txt, and commenting out the tests you don't want. This commit goes a step further by letting you give a list of tests you do want when invoking cmake, e.g.: cmake -DPYBIND11_TEST_OVERRIDE="test_issues.cpp;test_pickling.cpp" .. changes the build to build just those two tests (and changes the `pytest` target to invoke just the two associated tests). This persists in the build directory until you disable it again by running cmake with `-DPYBIND11_TEST_OVERRIDE=`. It also adds a message after the pytest output to remind you that it is in effect: Note: not all tests run: -DPYBIND11_TEST_OVERRIDE is in effect
2016-11-13 00:10:53 +00:00
# Full set of test files (you can override these; see below)
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
set(PYBIND11_TEST_FILES
Implement py::init_alias<>() constructors This commit adds support for forcing alias type initialization by defining constructors with `py::init_alias<arg1, arg2>()` instead of `py::init<arg1, arg2>()`. Currently py::init<> only results in Alias initialization if the type is extended in python, or the given arguments can't be used to construct the base type, but can be used to construct the alias. py::init_alias<>, in contrast, always invokes the constructor of the alias type. It looks like this was already the intention of `py::detail::init_alias`, which was forward-declared in 86d825f3302701d81414ddd3d38bcd09433076bc, but was apparently never finished: despite the existance of a .def method accepting it, the `detail::init_alias` class isn't actually defined anywhere. This commit completes the feature (or possibly repurposes it), allowing declaration of classes that will always initialize the trampoline which is (as I argued in #397) sometimes useful.
2016-09-09 06:42:51 +00:00
test_alias_initialization.cpp
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
test_buffers.cpp
test_callbacks.cpp
Refactor the chrono cast functions into chrono.h. Add unit tests and documentation for the chrono cast.
2016-08-25 13:08:04 +00:00
test_chrono.cpp
Allow arbitrary class_ template option ordering The current pybind11::class_<Type, Holder, Trampoline> fixed template ordering results in a requirement to repeat the Holder with its default value (std::unique_ptr<Type>) argument, which is a little bit annoying: it needs to be specified not because we want to override the default, but rather because we need to specify the third argument. This commit removes this limitation by making the class_ template take the type name plus a parameter pack of options. It then extracts the first valid holder type and the first subclass type for holder_type and trampoline type_alias, respectively. (If unfound, both fall back to their current defaults, `std::unique_ptr<type>` and `type`, respectively). If any unmatched template arguments are provided, a static assertion fails. What this means is that you can specify or omit the arguments in any order: py::class_<A, PyA> c1(m, "A"); py::class_<B, PyB, std::shared_ptr<B>> c2(m, "B"); py::class_<C, std::shared_ptr<C>, PyB> c3(m, "C"); It also allows future class attributes (such as base types in the next commit) to be passed as class template types rather than needing to use a py::base<> wrapper.
2016-09-06 16:17:06 +00:00
test_class_args.cpp
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
test_constants_and_functions.cpp
Test uncopyable static member Without the previous commit, this test generates a core dump.
2016-10-20 20:19:30 +00:00
test_copy_move_policies.cpp
Provide more control over automatic generation of docstrings (#486) Added the docstring_options class, which gives global control over the generation of docstrings and function signatures.
2016-11-15 11:38:05 +00:00
test_docstring_options.cpp
Make test initialization self-registering Adding or removing tests is a little bit cumbersome currently: the test needs to be added to CMakeLists.txt, the init function needs to be predeclared in pybind11_tests.cpp, then called in the plugin initialization. While this isn't a big deal for tests that are being committed, it's more of a hassle when working on some new feature or test code for which I temporarily only care about building and linking the test being worked on rather than the entire test suite. This commit changes tests to self-register their initialization by having each test initialize a local object (which stores the initialization function in a static variable). This makes changing the set of tests being build easy: one only needs to add or comment out test names in tests/CMakeLists.txt. A couple other minor changes that go along with this: - test_eigen.cpp is now included in the test list, then removed if eigen isn't available. This lets you disable the eigen tests by commenting it out, just like all the other tests, but keeps the build working without eigen eigen isn't available. (Also, if it's commented out, we don't even bother looking for and reporting the building with/without eigen status message). - pytest is now invoked with all the built test names (with .cpp changed to .py) so that it doesn't try to run tests that weren't built.
2016-09-03 18:54:22 +00:00
test_eigen.cpp
Move enum tests into a new file There are more enum tests than 'constants and functions'.
2016-08-12 22:57:24 +00:00
test_enum.cpp
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
test_eval.cpp
test_exceptions.cpp
test_inheritance.cpp
test_issues.cpp
test_keep_alive.cpp
test_kwargs_and_defaults.cpp
test_methods_and_attributes.cpp
test_modules.cpp
Fix missing smart_ptr test
2016-09-20 09:52:25 +00:00
test_multiple_inheritance.cpp
Expose some dtype/array attributes via NumPy C API
2016-08-29 01:41:05 +00:00
test_numpy_array.cpp
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
test_numpy_dtypes.cpp
test_numpy_vectorize.cpp
test_opaque_types.cpp
test_operator_overloading.cpp
test_pickling.cpp
test_python_types.cpp
test_sequences_and_iterators.cpp
Fix missing smart_ptr test
2016-09-20 09:52:25 +00:00
test_smart_ptr.cpp
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
test_stl_binders.cpp
test_virtual_functions.cpp
)
Add cmake option to override tests (#489) When working on some particular feature, it's nice to be able to disable all the tests except for the one I'm working on; this is currently possible by editing tests/CMakeLists.txt, and commenting out the tests you don't want. This commit goes a step further by letting you give a list of tests you do want when invoking cmake, e.g.: cmake -DPYBIND11_TEST_OVERRIDE="test_issues.cpp;test_pickling.cpp" .. changes the build to build just those two tests (and changes the `pytest` target to invoke just the two associated tests). This persists in the build directory until you disable it again by running cmake with `-DPYBIND11_TEST_OVERRIDE=`. It also adds a message after the pytest output to remind you that it is in effect: Note: not all tests run: -DPYBIND11_TEST_OVERRIDE is in effect
2016-11-13 00:10:53 +00:00
# Invoking cmake with something like:
# cmake -DPYBIND11_TEST_OVERRIDE="test_issues.cpp;test_picking.cpp" ..
# lets you override the tests that get compiled and run. You can restore to all tests with:
# cmake -DPYBIND11_TEST_OVERRIDE= ..
if (PYBIND11_TEST_OVERRIDE)
set(PYBIND11_TEST_FILES ${PYBIND11_TEST_OVERRIDE})
endif()
Make test initialization self-registering Adding or removing tests is a little bit cumbersome currently: the test needs to be added to CMakeLists.txt, the init function needs to be predeclared in pybind11_tests.cpp, then called in the plugin initialization. While this isn't a big deal for tests that are being committed, it's more of a hassle when working on some new feature or test code for which I temporarily only care about building and linking the test being worked on rather than the entire test suite. This commit changes tests to self-register their initialization by having each test initialize a local object (which stores the initialization function in a static variable). This makes changing the set of tests being build easy: one only needs to add or comment out test names in tests/CMakeLists.txt. A couple other minor changes that go along with this: - test_eigen.cpp is now included in the test list, then removed if eigen isn't available. This lets you disable the eigen tests by commenting it out, just like all the other tests, but keeps the build working without eigen eigen isn't available. (Also, if it's commented out, we don't even bother looking for and reporting the building with/without eigen status message). - pytest is now invoked with all the built test names (with .cpp changed to .py) so that it doesn't try to run tests that weren't built.
2016-09-03 18:54:22 +00:00
string(REPLACE ".cpp" ".py" PYBIND11_PYTEST_FILES "${PYBIND11_TEST_FILES}")
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
Make test initialization self-registering Adding or removing tests is a little bit cumbersome currently: the test needs to be added to CMakeLists.txt, the init function needs to be predeclared in pybind11_tests.cpp, then called in the plugin initialization. While this isn't a big deal for tests that are being committed, it's more of a hassle when working on some new feature or test code for which I temporarily only care about building and linking the test being worked on rather than the entire test suite. This commit changes tests to self-register their initialization by having each test initialize a local object (which stores the initialization function in a static variable). This makes changing the set of tests being build easy: one only needs to add or comment out test names in tests/CMakeLists.txt. A couple other minor changes that go along with this: - test_eigen.cpp is now included in the test list, then removed if eigen isn't available. This lets you disable the eigen tests by commenting it out, just like all the other tests, but keeps the build working without eigen eigen isn't available. (Also, if it's commented out, we don't even bother looking for and reporting the building with/without eigen status message). - pytest is now invoked with all the built test names (with .cpp changed to .py) so that it doesn't try to run tests that weren't built.
2016-09-03 18:54:22 +00:00
# Check if Eigen is available; if not, remove from PYBIND11_TEST_FILES (but
# keep it in PYBIND11_PYTEST_FILES, so that we get the "eigen is not installed"
# skip message).
list(FIND PYBIND11_TEST_FILES test_eigen.cpp PYBIND11_TEST_FILES_EIGEN_I)
if(PYBIND11_TEST_FILES_EIGEN_I GREATER -1)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Try loading via newer Eigen's Eigen3Config first (bypassing tools/FindEigen3.cmake).
# Eigen 3.3.1+ exports a cmake 3.0+ target for handling dependency requirements, but also
# produces a fatal error if loaded from a pre-3.0 cmake.
if (NOT CMAKE_VERSION VERSION_LESS 3.0)
find_package(Eigen3 QUIET CONFIG)
if (EIGEN3_FOUND)
if (EIGEN3_VERSION_STRING AND NOT EIGEN3_VERSION_STRING VERSION_LESS 3.3.1)
set(PYBIND11_EIGEN_VIA_TARGET 1)
endif()
endif()
endif()
if (NOT EIGEN3_FOUND)
# Couldn't load via target, so fall back to allowing module mode finding, which will pick up
# tools/FindEigen3.cmake
find_package(Eigen3 QUIET)
endif()
Make test initialization self-registering Adding or removing tests is a little bit cumbersome currently: the test needs to be added to CMakeLists.txt, the init function needs to be predeclared in pybind11_tests.cpp, then called in the plugin initialization. While this isn't a big deal for tests that are being committed, it's more of a hassle when working on some new feature or test code for which I temporarily only care about building and linking the test being worked on rather than the entire test suite. This commit changes tests to self-register their initialization by having each test initialize a local object (which stores the initialization function in a static variable). This makes changing the set of tests being build easy: one only needs to add or comment out test names in tests/CMakeLists.txt. A couple other minor changes that go along with this: - test_eigen.cpp is now included in the test list, then removed if eigen isn't available. This lets you disable the eigen tests by commenting it out, just like all the other tests, but keeps the build working without eigen eigen isn't available. (Also, if it's commented out, we don't even bother looking for and reporting the building with/without eigen status message). - pytest is now invoked with all the built test names (with .cpp changed to .py) so that it doesn't try to run tests that weren't built.
2016-09-03 18:54:22 +00:00
if(EIGEN3_FOUND)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Eigen 3.3.1+ cmake sets EIGEN3_VERSION_STRING (and hard codes the version when installed
# rather than looking it up in the cmake script); older versions, and the
# tools/FindEigen3.cmake, set EIGEN3_VERSION instead.
if(NOT EIGEN3_VERSION AND EIGEN3_VERSION_STRING)
set(EIGEN3_VERSION ${EIGEN3_VERSION_STRING})
endif()
Make test initialization self-registering Adding or removing tests is a little bit cumbersome currently: the test needs to be added to CMakeLists.txt, the init function needs to be predeclared in pybind11_tests.cpp, then called in the plugin initialization. While this isn't a big deal for tests that are being committed, it's more of a hassle when working on some new feature or test code for which I temporarily only care about building and linking the test being worked on rather than the entire test suite. This commit changes tests to self-register their initialization by having each test initialize a local object (which stores the initialization function in a static variable). This makes changing the set of tests being build easy: one only needs to add or comment out test names in tests/CMakeLists.txt. A couple other minor changes that go along with this: - test_eigen.cpp is now included in the test list, then removed if eigen isn't available. This lets you disable the eigen tests by commenting it out, just like all the other tests, but keeps the build working without eigen eigen isn't available. (Also, if it's commented out, we don't even bother looking for and reporting the building with/without eigen status message). - pytest is now invoked with all the built test names (with .cpp changed to .py) so that it doesn't try to run tests that weren't built.
2016-09-03 18:54:22 +00:00
message(STATUS "Building tests with Eigen v${EIGEN3_VERSION}")
else()
list(REMOVE_AT PYBIND11_TEST_FILES ${PYBIND11_TEST_FILES_EIGEN_I})
message(STATUS "Building tests WITHOUT Eigen")
endif()
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
endif()
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Compile with compiler warnings turned on
function(pybind11_enable_warnings target_name)
if(MSVC)
target_compile_options(${target_name} PRIVATE /W4)
else()
target_compile_options(${target_name} PRIVATE -Wall -Wextra -Wconversion -Wcast-qual)
endif()
if(PYBIND11_WERROR)
if(MSVC)
target_compile_options(${target_name} PRIVATE /WX)
else()
target_compile_options(${target_name} PRIVATE -Werror)
endif()
endif()
endfunction()
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
# Create the binding library
Overhaul LTO flag detection Clang on linux currently fails to run cmake: $ CC=clang CXX=clang++ cmake .. ... -- Configuring done CMake Error at tools/pybind11Tools.cmake:135 (target_compile_options): Error evaluating generator expression: $<:-flto> Expression did not evaluate to a known generator expression Call Stack (most recent call first): tests/CMakeLists.txt:68 (pybind11_add_module) But investigating this led to various other -flto detection problems; this commit thus overhauls LTO flag detection: - -flto needs to be passed to the linker as well - Also compile with -fno-fat-lto-objects under GCC - Pass the equivalent flags to MSVC - Enable LTO flags for via generator expressions (for non-debug builds only), so that multi-config builds (like on Windows) still work properly. This seems reasonable, however, even on single-config builds (and simplifies the cmake code a bit). - clang's lto linker plugins don't accept '-Os', so replace it with '-O3' when doing a MINSIZEREL build - Enable trying ThinLTO by default for test suite (only affects clang) - Match Clang$ rather than ^Clang$ because, for cmake with 3.0+ policies in effect, the compiler ID will be AppleClang on macOS.
2017-01-17 07:13:11 +00:00
pybind11_add_module(pybind11_tests THIN_LTO pybind11_tests.cpp
Make header files viewable in IDEs (fixes #424)
2016-09-29 19:30:00 +00:00
${PYBIND11_TEST_FILES} ${PYBIND11_HEADERS})
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
pybind11_enable_warnings(pybind11_tests)
if(EIGEN3_FOUND)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
if (PYBIND11_EIGEN_VIA_TARGET)
target_link_libraries(pybind11_tests PRIVATE Eigen3::Eigen)
else()
target_include_directories(pybind11_tests PRIVATE ${EIGEN3_INCLUDE_DIR})
endif()
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
target_compile_definitions(pybind11_tests PRIVATE -DPYBIND11_TEST_EIGEN)
endif()
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
set(testdir ${CMAKE_CURRENT_SOURCE_DIR})
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
# Always write the output file directly into the 'tests' directory (even on MSVC)
if(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY)
set_target_properties(pybind11_tests PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${testdir})
foreach(config ${CMAKE_CONFIGURATION_TYPES})
string(TOUPPER ${config} config)
set_target_properties(pybind11_tests PROPERTIES LIBRARY_OUTPUT_DIRECTORY_${config} ${testdir})
endforeach()
endif()
Don't install pytest from cmake, just fail instead Installing something outside the project directory from a cmake invocation is overly intrusive; this changes tests/CMakeLists.txt to just fail with an informative message instead, and changes the travis-ci builds to install pytest via pip or apt-get.
2016-08-26 21:11:40 +00:00
# Make sure pytest is found or produce a fatal error
Automatically install pytest from CMake Pytest is a development dependency but we can make it painless by automating the install using CMake.
2016-08-13 00:44:56 +00:00
if(NOT PYBIND11_PYTEST_FOUND)
Minor pytest maintenance (#702) * Add `pytest.ini` config file and set default options there instead of in `CMakeLists.txt` (command line arguments). * Change all output capture from `capfd` (filedescriptors) to `capsys` (Python's `sys.stdout` and `sys.stderr`). This avoids capturing low-level C errors, e.g. from the debug build of Python. * Set pytest minimum version to 3.0 to make it easier to use new features. Removed conditional use of `excinfo.match()`. * Clean up some leftover function-level `@pytest.requires_numpy`.
2017-03-10 14:42:42 +00:00
execute_process(COMMAND ${PYTHON_EXECUTABLE} -c "import pytest; print(pytest.__version__)"
RESULT_VARIABLE pytest_not_found OUTPUT_VARIABLE pytest_version ERROR_QUIET)
if(pytest_not_found)
message(FATAL_ERROR "Running the tests requires pytest. Please install it manually"
" (try: ${PYTHON_EXECUTABLE} -m pip install pytest)")
elseif(pytest_version VERSION_LESS 3.0)
message(FATAL_ERROR "Running the tests requires pytest >= 3.0. Found: ${pytest_version}"
"Please update it (try: ${PYTHON_EXECUTABLE} -m pip install -U pytest)")
Automatically install pytest from CMake Pytest is a development dependency but we can make it painless by automating the install using CMake.
2016-08-13 00:44:56 +00:00
endif()
fixed typo in cmake file
2016-10-09 11:51:05 +00:00
set(PYBIND11_PYTEST_FOUND TRUE CACHE INTERNAL "")
Automatically install pytest from CMake Pytest is a development dependency but we can make it painless by automating the install using CMake.
2016-08-13 00:44:56 +00:00
endif()
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
# A single command to compile and run the tests
Minor pytest maintenance (#702) * Add `pytest.ini` config file and set default options there instead of in `CMakeLists.txt` (command line arguments). * Change all output capture from `capfd` (filedescriptors) to `capsys` (Python's `sys.stdout` and `sys.stderr`). This avoids capturing low-level C errors, e.g. from the debug build of Python. * Set pytest minimum version to 3.0 to make it easier to use new features. Removed conditional use of `excinfo.match()`. * Clean up some leftover function-level `@pytest.requires_numpy`.
2017-03-10 14:42:42 +00:00
add_custom_target(pytest COMMAND ${PYTHON_EXECUTABLE} -m pytest ${PYBIND11_PYTEST_FILES}
Port tests to pytest Use simple asserts and pytest's powerful introspection to make testing simpler. This merges the old .py/.ref file pairs into simple .py files where the expected values are right next to the code being tested. This commit does not touch the C++ part of the code and replicates the Python tests exactly like the old .ref-file-based approach.
2016-08-12 11:50:00 +00:00
DEPENDS pybind11_tests WORKING_DIRECTORY ${testdir})
Add debugging info about .so size to build output (#477) * Add debugging info about so size to build output This adds a small python script to tools that captures before-and-after .so sizes between builds and outputs this in the build output via a string such as: ------ pybind11_tests.cpython-35m-x86_64-linux-gnu.so file size: 924696 (decrease of 73680 bytes = 7.38%) ------ pybind11_tests.cpython-35m-x86_64-linux-gnu.so file size: 998376 (increase of 73680 bytes = 7.97%) ------ pybind11_tests.cpython-35m-x86_64-linux-gnu.so file size: 998376 (no change) Or, if there was no .so during the build, just the .so size by itself: ------ pybind11_tests.cpython-35m-x86_64-linux-gnu.so file size: 998376 This allows you to, for example, build, checkout a different branch, rebuild, and easily see exactly the change in the pybind11_tests.so size. It also allows looking at the travis and appveyor build logs to get an idea of .so/.dll sizes across different build systems. * Minor libsize.py script changes - Use RAII open - Remove unused libsize=-1 - Report change as [+-]xyz bytes = [+-]a.bc%
2016-11-04 13:47:41 +00:00
Add cmake option to override tests (#489) When working on some particular feature, it's nice to be able to disable all the tests except for the one I'm working on; this is currently possible by editing tests/CMakeLists.txt, and commenting out the tests you don't want. This commit goes a step further by letting you give a list of tests you do want when invoking cmake, e.g.: cmake -DPYBIND11_TEST_OVERRIDE="test_issues.cpp;test_pickling.cpp" .. changes the build to build just those two tests (and changes the `pytest` target to invoke just the two associated tests). This persists in the build directory until you disable it again by running cmake with `-DPYBIND11_TEST_OVERRIDE=`. It also adds a message after the pytest output to remind you that it is in effect: Note: not all tests run: -DPYBIND11_TEST_OVERRIDE is in effect
2016-11-13 00:10:53 +00:00
if(PYBIND11_TEST_OVERRIDE)
add_custom_command(TARGET pytest POST_BUILD
COMMAND ${CMAKE_COMMAND} -E echo "Note: not all tests run: -DPYBIND11_TEST_OVERRIDE is in effect")
endif()
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Add a check target to run all the tests, starting with pytest (we add dependencies to this below)
add_custom_target(check DEPENDS pytest)
# The remaining tests only apply when being built as part of the pybind11 project, but not if the
# tests are being built independently.
if (NOT PROJECT_NAME STREQUAL "pybind11")
return()
endif()
# Add a post-build comment to show the .so size and, if a previous size, compare it:
Make sure add_subdirectory and find_package behave identically Add a BUILD_INTERFACE and a pybind11::pybind11 alias for the interface library to match the installed target. Add new cmake tests for add_subdirectory and consolidates the .cpp and .py files needed for the cmake build tests: Before: tests |-- test_installed_module | |-- CMakeLists.txt | |-- main.cpp | \-- test.py \-- test_installed_target |-- CMakeLists.txt |-- main.cpp \-- test.py After: tests \-- test_cmake_build |-- installed_module/CMakeLists.txt |-- installed_target/CMakeLists.txt |-- subdirectory_module/CMakeLists.txt |-- subdirectory_target/CMakeLists.txt |-- main.cpp \-- test.py
2016-12-14 00:43:39 +00:00
add_custom_command(TARGET pybind11_tests POST_BUILD
Fix path to libsize.py (#658) Use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIR as the base of the path to libsize.py. This fixes an error if pybind11 is being built directly within another project.
2017-02-08 22:43:23 +00:00
COMMAND ${PYTHON_EXECUTABLE} ${PROJECT_SOURCE_DIR}/tools/libsize.py
Make sure add_subdirectory and find_package behave identically Add a BUILD_INTERFACE and a pybind11::pybind11 alias for the interface library to match the installed target. Add new cmake tests for add_subdirectory and consolidates the .cpp and .py files needed for the cmake build tests: Before: tests |-- test_installed_module | |-- CMakeLists.txt | |-- main.cpp | \-- test.py \-- test_installed_target |-- CMakeLists.txt |-- main.cpp \-- test.py After: tests \-- test_cmake_build |-- installed_module/CMakeLists.txt |-- installed_target/CMakeLists.txt |-- subdirectory_module/CMakeLists.txt |-- subdirectory_target/CMakeLists.txt |-- main.cpp \-- test.py
2016-12-14 00:43:39 +00:00
$<TARGET_FILE:pybind11_tests> ${CMAKE_CURRENT_BINARY_DIR}/sosize-$<TARGET_FILE_NAME:pybind11_tests>.txt)
# Test CMake build using functions and targets from subdirectory or installed location
add_custom_target(test_cmake_build)
if(NOT CMAKE_VERSION VERSION_LESS 3.1)
# 3.0 needed for interface library for subdirectory_target/installed_target
test installed pybind
2016-12-13 16:02:37 +00:00
# 3.1 needed for cmake -E env for testing
Make sure add_subdirectory and find_package behave identically Add a BUILD_INTERFACE and a pybind11::pybind11 alias for the interface library to match the installed target. Add new cmake tests for add_subdirectory and consolidates the .cpp and .py files needed for the cmake build tests: Before: tests |-- test_installed_module | |-- CMakeLists.txt | |-- main.cpp | \-- test.py \-- test_installed_target |-- CMakeLists.txt |-- main.cpp \-- test.py After: tests \-- test_cmake_build |-- installed_module/CMakeLists.txt |-- installed_target/CMakeLists.txt |-- subdirectory_module/CMakeLists.txt |-- subdirectory_target/CMakeLists.txt |-- main.cpp \-- test.py
2016-12-14 00:43:39 +00:00
include(CMakeParseArguments)
function(pybind11_add_build_test name)
cmake_parse_arguments(ARG "INSTALL" "" "" ${ARGN})
set(build_options "-DCMAKE_PREFIX_PATH=${PROJECT_BINARY_DIR}/mock_install"
"-DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}"
"-DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}"
"-DPYBIND11_CPP_STANDARD=${PYBIND11_CPP_STANDARD}")
if(NOT ARG_INSTALL)
list(APPEND build_options "-DPYBIND11_PROJECT_DIR=${PROJECT_SOURCE_DIR}")
endif()
add_custom_target(test_${name} ${CMAKE_CTEST_COMMAND}
--quiet --output-log test_cmake_build/${name}.log
--build-and-test "${CMAKE_CURRENT_SOURCE_DIR}/test_cmake_build/${name}"
"${CMAKE_CURRENT_BINARY_DIR}/test_cmake_build/${name}"
--build-config Release
--build-noclean
--build-generator ${CMAKE_GENERATOR}
$<$<BOOL:${CMAKE_GENERATOR_PLATFORM}>:--build-generator-platform> ${CMAKE_GENERATOR_PLATFORM}
--build-makeprogram ${CMAKE_MAKE_PROGRAM}
--build-target check
--build-options ${build_options}
test installed pybind
2016-12-13 16:02:37 +00:00
)
Make sure add_subdirectory and find_package behave identically Add a BUILD_INTERFACE and a pybind11::pybind11 alias for the interface library to match the installed target. Add new cmake tests for add_subdirectory and consolidates the .cpp and .py files needed for the cmake build tests: Before: tests |-- test_installed_module | |-- CMakeLists.txt | |-- main.cpp | \-- test.py \-- test_installed_target |-- CMakeLists.txt |-- main.cpp \-- test.py After: tests \-- test_cmake_build |-- installed_module/CMakeLists.txt |-- installed_target/CMakeLists.txt |-- subdirectory_module/CMakeLists.txt |-- subdirectory_target/CMakeLists.txt |-- main.cpp \-- test.py
2016-12-14 00:43:39 +00:00
if(ARG_INSTALL)
add_dependencies(test_${name} mock_install)
endif()
add_dependencies(test_cmake_build test_${name})
endfunction()
pybind11_add_build_test(subdirectory_function)
pybind11_add_build_test(subdirectory_target)
if(PYBIND11_INSTALL)
add_custom_target(mock_install ${CMAKE_COMMAND}
"-DCMAKE_INSTALL_PREFIX=${PROJECT_BINARY_DIR}/mock_install"
-P "${PROJECT_BINARY_DIR}/cmake_install.cmake"
test installed pybind
2016-12-13 16:02:37 +00:00
)
Make sure add_subdirectory and find_package behave identically Add a BUILD_INTERFACE and a pybind11::pybind11 alias for the interface library to match the installed target. Add new cmake tests for add_subdirectory and consolidates the .cpp and .py files needed for the cmake build tests: Before: tests |-- test_installed_module | |-- CMakeLists.txt | |-- main.cpp | \-- test.py \-- test_installed_target |-- CMakeLists.txt |-- main.cpp \-- test.py After: tests \-- test_cmake_build |-- installed_module/CMakeLists.txt |-- installed_target/CMakeLists.txt |-- subdirectory_module/CMakeLists.txt |-- subdirectory_target/CMakeLists.txt |-- main.cpp \-- test.py
2016-12-14 00:43:39 +00:00
pybind11_add_build_test(installed_function INSTALL)
pybind11_add_build_test(installed_target INSTALL)
test installed pybind
2016-12-13 16:02:37 +00:00
endif()
endif()
Add 'check' target to run all available tests
2016-12-17 20:39:17 +00:00
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
add_dependencies(check test_cmake_build)
Reference in New Issue Copy Permalink