pybind11/tests/CMakeLists.txt

235 lines
8.4 KiB
CMake
Raw Normal View History

Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# CMakeLists.txt -- Build system for the pybind11 test suite
#
# Copyright (c) 2015 Wenzel Jakob <wenzel@inf.ethz.ch>
#
# All rights reserved. Use of this source code is governed by a
# BSD-style license that can be found in the LICENSE file.
cmake_minimum_required(VERSION 2.8.12)
option(PYBIND11_WERROR "Report all warnings as errors" OFF)
if (CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_SOURCE_DIR)
# We're being loaded directly, i.e. not via add_subdirectory, so make this
# work as its own project and load the pybind11Config to get the tools we need
project(pybind11_tests CXX)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
find_package(pybind11 REQUIRED CONFIG)
endif()
if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
message(STATUS "Setting tests build type to MinSizeRel as none was specified")
set(CMAKE_BUILD_TYPE MinSizeRel CACHE STRING "Choose the type of build." FORCE)
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release"
"MinSizeRel" "RelWithDebInfo")
endif()
# Full set of test files (you can override these; see below)
set(PYBIND11_TEST_FILES
test_buffers.cpp
test_builtin_casters.cpp
test_call_policies.cpp
test_callbacks.cpp
test_chrono.cpp
test_class.cpp
test_constants_and_functions.cpp
test_copy_move.cpp
test_docstring_options.cpp
test_eigen.cpp
test_enum.cpp
test_eval.cpp
test_exceptions.cpp
Allow binding factory functions as constructors This allows you to use: cls.def(py::init(&factory_function)); where `factory_function` returns a pointer, holder, or value of the class type (or a derived type). Various compile-time checks (static_asserts) are performed to ensure the function is valid, and various run-time type checks where necessary. Some other details of this feature: - The `py::init` name doesn't conflict with the templated no-argument `py::init<...>()`, but keeps the naming consistent: the existing templated, no-argument one wraps constructors, the no-template, function-argument one wraps factory functions. - If returning a CppClass (whether by value or pointer) when an CppAlias is required (i.e. python-side inheritance and a declared alias), a dynamic_cast to the alias is attempted (for the pointer version); if it fails, or if returned by value, an Alias(Class &&) constructor is invoked. If this constructor doesn't exist, a runtime error occurs. - for holder returns when an alias is required, we try a dynamic_cast of the wrapped pointer to the alias to see if it is already an alias instance; if it isn't, we raise an error. - `py::init(class_factory, alias_factory)` is also available that takes two factories: the first is called when an alias is not needed, the second when it is. - Reimplement factory instance clearing. The previous implementation failed under python-side multiple inheritance: *each* inherited type's factory init would clear the instance instead of only setting its own type value. The new implementation here clears just the relevant value pointer. - dealloc is updated to explicitly set the leftover value pointer to nullptr and the `holder_constructed` flag to false so that it can be used to clear preallocated value without needing to rebuild the instance internals data. - Added various tests to test out new allocation/deallocation code. - With preallocation now done lazily, init factory holders can completely avoid the extra overhead of needing an extra allocation/deallocation. - Updated documentation to make factory constructors the default advanced constructor style. - If an `__init__` is called a second time, we have two choices: we can throw away the first instance, replacing it with the second; or we can ignore the second call. The latter is slightly easier, so do that.
2017-06-13 01:52:48 +00:00
test_factory_constructors.cpp
test_iostream.cpp
test_kwargs_and_defaults.cpp
test_local_bindings.cpp
test_methods_and_attributes.cpp
test_modules.cpp
2016-09-20 09:52:25 +00:00
test_multiple_inheritance.cpp
test_numpy_array.cpp
test_numpy_dtypes.cpp
test_numpy_vectorize.cpp
test_opaque_types.cpp
test_operator_overloading.cpp
test_pickling.cpp
test_pytypes.cpp
test_sequences_and_iterators.cpp
2016-09-20 09:52:25 +00:00
test_smart_ptr.cpp
test_stl.cpp
test_stl_binders.cpp
test_virtual_functions.cpp
)
# Invoking cmake with something like:
# cmake -DPYBIND11_TEST_OVERRIDE="test_callbacks.cpp;test_picking.cpp" ..
# lets you override the tests that get compiled and run. You can restore to all tests with:
# cmake -DPYBIND11_TEST_OVERRIDE= ..
if (PYBIND11_TEST_OVERRIDE)
set(PYBIND11_TEST_FILES ${PYBIND11_TEST_OVERRIDE})
endif()
string(REPLACE ".cpp" ".py" PYBIND11_PYTEST_FILES "${PYBIND11_TEST_FILES}")
# Contains the set of test files that require pybind11_cross_module_tests to be
# built; if none of these are built (i.e. because TEST_OVERRIDE is used and
# doesn't include them) the second module doesn't get built.
set(PYBIND11_CROSS_MODULE_TESTS
Fix builtin exception handlers to work across modules The builtin exception handler currently doesn't work across modules under clang/libc++ for builtin pybind exceptions like `pybind11::error_already_set` or `pybind11::stop_iteration`: under RTLD_LOCAL module loading clang considers each module's exception classes distinct types. This then means that the base exception translator fails to catch the exceptions and the fall through to the generic `std::exception` handler, which completely breaks things like `stop_iteration`: only the `stop_iteration` of the first module loaded actually works properly; later modules raise a RuntimeError with no message when trying to invoke their iterators. For example, two modules defined like this exhibit the behaviour under clang++/libc++: z1.cpp: #include <pybind11/pybind11.h> #include <pybind11/stl_bind.h> namespace py = pybind11; PYBIND11_MODULE(z1, m) { py::bind_vector<std::vector<long>>(m, "IntVector"); } z2.cpp: #include <pybind11/pybind11.h> #include <pybind11/stl_bind.h> namespace py = pybind11; PYBIND11_MODULE(z2, m) { py::bind_vector<std::vector<double>>(m, "FloatVector"); } Python: import z1, z2 for i in z2.FloatVector(): pass results in: Traceback (most recent call last): File "zs.py", line 2, in <module> for i in z2.FloatVector(): RuntimeError This commit fixes the issue by adding a new exception translator each time the internals pointer is initialized from python builtins: this generally means the internals data was initialized by some other module. (The extra translator(s) are skipped under libstdc++).
2017-07-29 01:38:23 +00:00
test_exceptions.py
test_local_bindings.py
)
# Check if Eigen is available; if not, remove from PYBIND11_TEST_FILES (but
# keep it in PYBIND11_PYTEST_FILES, so that we get the "eigen is not installed"
# skip message).
list(FIND PYBIND11_TEST_FILES test_eigen.cpp PYBIND11_TEST_FILES_EIGEN_I)
if(PYBIND11_TEST_FILES_EIGEN_I GREATER -1)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Try loading via newer Eigen's Eigen3Config first (bypassing tools/FindEigen3.cmake).
# Eigen 3.3.1+ exports a cmake 3.0+ target for handling dependency requirements, but also
# produces a fatal error if loaded from a pre-3.0 cmake.
if (NOT CMAKE_VERSION VERSION_LESS 3.0)
find_package(Eigen3 QUIET CONFIG)
if (EIGEN3_FOUND)
if (EIGEN3_VERSION_STRING AND NOT EIGEN3_VERSION_STRING VERSION_LESS 3.3.1)
set(PYBIND11_EIGEN_VIA_TARGET 1)
endif()
endif()
endif()
if (NOT EIGEN3_FOUND)
# Couldn't load via target, so fall back to allowing module mode finding, which will pick up
# tools/FindEigen3.cmake
find_package(Eigen3 QUIET)
endif()
if(EIGEN3_FOUND)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Eigen 3.3.1+ cmake sets EIGEN3_VERSION_STRING (and hard codes the version when installed
# rather than looking it up in the cmake script); older versions, and the
# tools/FindEigen3.cmake, set EIGEN3_VERSION instead.
if(NOT EIGEN3_VERSION AND EIGEN3_VERSION_STRING)
set(EIGEN3_VERSION ${EIGEN3_VERSION_STRING})
endif()
message(STATUS "Building tests with Eigen v${EIGEN3_VERSION}")
else()
list(REMOVE_AT PYBIND11_TEST_FILES ${PYBIND11_TEST_FILES_EIGEN_I})
message(STATUS "Building tests WITHOUT Eigen")
endif()
endif()
# Optional dependency for some tests (boost::variant is only supported with version >= 1.56)
find_package(Boost 1.56)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Compile with compiler warnings turned on
function(pybind11_enable_warnings target_name)
if(MSVC)
target_compile_options(${target_name} PRIVATE /W4)
else()
target_compile_options(${target_name} PRIVATE -Wall -Wextra -Wconversion -Wcast-qual)
endif()
if(PYBIND11_WERROR)
if(MSVC)
target_compile_options(${target_name} PRIVATE /WX)
else()
target_compile_options(${target_name} PRIVATE -Werror)
endif()
endif()
endfunction()
set(test_targets pybind11_tests)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Build pybind11_cross_module_tests if any test_whatever.py are being built that require it
foreach(t ${PYBIND11_CROSS_MODULE_TESTS})
list(FIND PYBIND11_PYTEST_FILES ${t} i)
if (i GREATER -1)
list(APPEND test_targets pybind11_cross_module_tests)
break()
endif()
endforeach()
set(testdir ${CMAKE_CURRENT_SOURCE_DIR})
foreach(target ${test_targets})
set(test_files ${PYBIND11_TEST_FILES})
if(NOT target STREQUAL "pybind11_tests")
set(test_files "")
endif()
# Create the binding library
pybind11_add_module(${target} THIN_LTO ${target}.cpp ${test_files} ${PYBIND11_HEADERS})
pybind11_enable_warnings(${target})
if(MSVC)
target_compile_options(${target} PRIVATE /utf-8)
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
endif()
if(EIGEN3_FOUND)
if (PYBIND11_EIGEN_VIA_TARGET)
target_link_libraries(${target} PRIVATE Eigen3::Eigen)
else()
target_include_directories(${target} PRIVATE ${EIGEN3_INCLUDE_DIR})
endif()
target_compile_definitions(${target} PRIVATE -DPYBIND11_TEST_EIGEN)
endif()
if(Boost_FOUND)
target_include_directories(${target} PRIVATE ${Boost_INCLUDE_DIRS})
target_compile_definitions(${target} PRIVATE -DPYBIND11_TEST_BOOST)
endif()
# Always write the output file directly into the 'tests' directory (even on MSVC)
if(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY)
set_target_properties(${target} PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${testdir})
foreach(config ${CMAKE_CONFIGURATION_TYPES})
string(TOUPPER ${config} config)
set_target_properties(${target} PROPERTIES LIBRARY_OUTPUT_DIRECTORY_${config} ${testdir})
endforeach()
endif()
endforeach()
# Make sure pytest is found or produce a fatal error
if(NOT PYBIND11_PYTEST_FOUND)
execute_process(COMMAND ${PYTHON_EXECUTABLE} -c "import pytest; print(pytest.__version__)"
RESULT_VARIABLE pytest_not_found OUTPUT_VARIABLE pytest_version ERROR_QUIET)
if(pytest_not_found)
message(FATAL_ERROR "Running the tests requires pytest. Please install it manually"
" (try: ${PYTHON_EXECUTABLE} -m pip install pytest)")
elseif(pytest_version VERSION_LESS 3.0)
message(FATAL_ERROR "Running the tests requires pytest >= 3.0. Found: ${pytest_version}"
"Please update it (try: ${PYTHON_EXECUTABLE} -m pip install -U pytest)")
endif()
2016-10-09 11:51:05 +00:00
set(PYBIND11_PYTEST_FOUND TRUE CACHE INTERNAL "")
endif()
if(CMAKE_VERSION VERSION_LESS 3.2)
set(PYBIND11_USES_TERMINAL "")
else()
set(PYBIND11_USES_TERMINAL "USES_TERMINAL")
endif()
# A single command to compile and run the tests
add_custom_target(pytest COMMAND ${PYTHON_EXECUTABLE} -m pytest ${PYBIND11_PYTEST_FILES}
DEPENDS ${test_targets} WORKING_DIRECTORY ${testdir} ${PYBIND11_USES_TERMINAL})
if(PYBIND11_TEST_OVERRIDE)
add_custom_command(TARGET pytest POST_BUILD
COMMAND ${CMAKE_COMMAND} -E echo "Note: not all tests run: -DPYBIND11_TEST_OVERRIDE is in effect")
endif()
Independent tests (#665) * Make tests buildable independently This makes "tests" buildable as a separate project that uses find_package(pybind11 CONFIG) when invoked independently. This also moves the WERROR option into tests/CMakeLists.txt, as that's the only place it is used. * Use Eigen 3.3.1's cmake target, if available This changes the eigen finding code to attempt to use Eigen's system-installed Eigen3Config first. In Eigen 3.3.1, it exports a cmake Eigen3::Eigen target to get dependencies from (rather than setting the include path directly). If it fails, we fall back to the trying to load allowing modules (i.e. allowing our tools/FindEigen3.cmake). If we either fallback, or the eigen version is older than 3.3.1 (or , we still set the include directory manually; otherwise, for CONFIG + new Eigen, we get it via the target. This is also needed to allow 'tests' to be built independently, when the find_package(Eigen3) is going to find via the system-installed Eigen3Config.cmake. * Add a install-then-build test, using clang on linux This tests that `make install` to the actual system, followed by a build of the tests (without the main pybind11 repository available) works as expected. To also expand the testing variety a bit, it also builds using clang-3.9 instead of gcc. * Don't try loading Eigen3Config in cmake < 3.0 It could FATAL_ERROR as the newer cmake includes a cmake 3.0 required line. If doing an independent, out-of-tree "tests" build, the regular find_package(Eigen3) is likely to fail with the same error, but I think we can just let that be: if you want a recent Eigen with proper cmake loading support *and* want to do an independent tests build, you'll need at least cmake 3.0.
2017-02-24 22:07:53 +00:00
# Add a check target to run all the tests, starting with pytest (we add dependencies to this below)
add_custom_target(check DEPENDS pytest)
# The remaining tests only apply when being built as part of the pybind11 project, but not if the
# tests are being built independently.
if (NOT PROJECT_NAME STREQUAL "pybind11")
return()
endif()
# Add a post-build comment to show the primary test suite .so size and, if a previous size, compare it:
add_custom_command(TARGET pybind11_tests POST_BUILD
COMMAND ${PYTHON_EXECUTABLE} ${PROJECT_SOURCE_DIR}/tools/libsize.py
$<TARGET_FILE:pybind11_tests> ${CMAKE_CURRENT_BINARY_DIR}/sosize-$<TARGET_FILE_NAME:pybind11_tests>.txt)
# Test embedding the interpreter. Provides the `cpptest` target.
add_subdirectory(test_embed)
# Test CMake build using functions and targets from subdirectory or installed location
add_subdirectory(test_cmake_build)