This commit includes modifications that are needed to get pybind11 to work with PyPy. The full test suite compiles and runs except for a last few functions that are commented out (due to problems in PyPy that were reported on the PyPy bugtracker).
Two somewhat intrusive changes were needed to make it possible: two new tags ``py::buffer_protocol()`` and ``py::metaclass()`` must now be specified to the ``class_`` constructor if the class uses the buffer protocol and/or requires a metaclass (e.g. for static properties).
Note that this is only for the PyPy version based on Python 2.7 for now. When the PyPy 3.x has caught up in terms of cpyext compliance, a PyPy 3.x patch will follow.
This adds automatic casting when assigning to python types like dict,
list, and attributes. Instead of:
dict["key"] = py::cast(val);
m.attr("foo") = py::cast(true);
list.append(py::cast(42));
you can now simply write:
dict["key"] = val;
m.attr("foo") = true;
list.append(42);
Casts needing extra parameters (e.g. for a non-default rvp) still
require the py::cast() call. set::add() is also supported.
All usage is channeled through a SFINAE implementation which either just returns or casts.
Combined non-converting handle and autocasting template methods via a
helper method that either just returns (handle) or casts (C++ type).
Following commit 90d278, the object code generated by the python
bindings of nanogui (github.com/wjakob/nanogui) went up by a whopping
12%. It turns out that that project has quite a few enums where we don't
really care about arithmetic operators.
This commit thus partially reverts the effects of #503 by introducing
an additional attribute py::arithmetic() that must be specified if the
arithmetic operators are desired.
* Deprecate the `py::object::str()` member function since `py::str(obj)`
is now equivalent and preferred
* Make `py::repr()` a free function
* Make sure obj.cast<T>() works as expected when T is a Python type
`obj.cast<T>()` should be the same as `T(obj)`, i.e. it should convert
the given object to a different Python type. However, `obj.cast<T>()`
usually calls `type_caster::load()` which only checks the type without
doing any actual conversion. That causes a very unexpected `cast_error`.
This commit makes it so that `obj.cast<T>()` and `T(obj)` are the same
when T is a Python type.
* Simplify pytypes converting constructor implementation
It's not necessary to maintain a full set of converting constructors
and assignment operators + const& and &&. A single converting const&
constructor will work and there is no impact on binary size. On the
other hand, the conversion functions can be significantly simplified.
* Add type caster for std::experimental::optional
* Add tests for std::experimental::optional
* Support both <optional> / <experimental/optional>
* Mention std{::experimental,}::optional in the docs
* Make reference(_internal) the default return value policy for properties
Before this, all `def_property*` functions used `automatic` as their
default return value policy. This commit makes it so that:
* Non-static properties use `reference_interal` by default, thus
matching `def_readonly` and `def_readwrite`.
* Static properties use `reference` by default, thus matching
`def_readonly_static` and `def_readwrite_static`.
In case `cpp_function` is passed to any `def_property*`, its policy will
be used instead of any defaults. User-defined arguments in `extras`
still have top priority and will override both the default policies and
the ones from `cpp_function`.
Resolves#436.
* Almost always use return_value_policy::move for rvalues
For functions which return rvalues or rvalue references, the only viable
return value policies are `copy` and `move`. `reference(_internal)` and
`take_ownership` would take the address of a temporary which is always
an error.
This commit prevents possible user errors by overriding the bad rvalue
policies with `move`. Besides `move`, only `copy` is allowed, and only
if it's explicitly selected by the user.
This is also a necessary safety feature to support the new default
return value policies for properties: `reference(_internal)`.
With this there is no more need for manual user declarations like
`PYBIND11_DECLARE_HOLDER_TYPE(T, std::shared_ptr<T>)`. Existing ones
will still compile without error -- they will just be ignored silently.
Resolves#446.
The custom exception handling added in PR #273 is robust, but is overly
complex for declaring the most common simple C++ -> Python exception
mapping that needs only to copy `what()`. This add a simpler
`py::register_exception<CppExp>(module, "PyExp");` function that greatly
simplifies the common basic case of translation of a simple CppException
into a simple PythonException, while not removing the more advanced
capabilities of defining custom exception handlers.
This adds a static local variable (in dead code unless actually needed)
in the overload code that is used for storage if the overload is for
some convert-by-value type (such as numeric values or std::string).
This has limitations (as written up in the advanced doc), but is better
than simply not being able to overload reference or pointer methods.
This commit adds support for forcing alias type initialization by
defining constructors with `py::init_alias<arg1, arg2>()` instead of
`py::init<arg1, arg2>()`. Currently py::init<> only results in Alias
initialization if the type is extended in python, or the given
arguments can't be used to construct the base type, but can be used to
construct the alias. py::init_alias<>, in contrast, always invokes the
constructor of the alias type.
It looks like this was already the intention of
`py::detail::init_alias`, which was forward-declared in
86d825f330, but was apparently never
finished: despite the existance of a .def method accepting it, the
`detail::init_alias` class isn't actually defined anywhere.
This commit completes the feature (or possibly repurposes it), allowing
declaration of classes that will always initialize the trampoline which
is (as I argued in #397) sometimes useful.
This allows a slightly cleaner base type specification of:
py::class_<Type, Base>("Type")
as an alternative to
py::class_<Type>("Type", py::base<Base>())
As with the other template parameters, the order relative to the holder
or trampoline types doesn't matter.
This also includes a compile-time assertion failure if attempting to
specify more than one base class (but is easily extendible to support
multiple inheritance, someday, by updating the class_selector::set_bases
function to set multiple bases).
The current pybind11::class_<Type, Holder, Trampoline> fixed template
ordering results in a requirement to repeat the Holder with its default
value (std::unique_ptr<Type>) argument, which is a little bit annoying:
it needs to be specified not because we want to override the default,
but rather because we need to specify the third argument.
This commit removes this limitation by making the class_ template take
the type name plus a parameter pack of options. It then extracts the
first valid holder type and the first subclass type for holder_type and
trampoline type_alias, respectively. (If unfound, both fall back to
their current defaults, `std::unique_ptr<type>` and `type`,
respectively). If any unmatched template arguments are provided, a
static assertion fails.
What this means is that you can specify or omit the arguments in any
order:
py::class_<A, PyA> c1(m, "A");
py::class_<B, PyB, std::shared_ptr<B>> c2(m, "B");
py::class_<C, std::shared_ptr<C>, PyB> c3(m, "C");
It also allows future class attributes (such as base types in the next
commit) to be passed as class template types rather than needing to use
a py::base<> wrapper.
Test compilation instructions for Windows were changed to use the
`cmake --build` command line invocation which should be easier than
manually setting up using the CMake GUI and Visual Studio.
For example keep_alive<0,1>() should work where the return value may sometimes be None. At present a "Could not allocate weak reference!" exception is thrown.
Update documentation to clarify behaviour of keep_alive when nurse is None or does not support weak references.
The missing empty line after `.. code-block::` resulted in incorrectly
parsed restructuredtext (sphinx warnings) and the code blocks were not
generated in the html output.
The `exclude_patterns` change just silences the orphaned file warning.
[ci skip]
The format strings that are known at compile time are now accessible
via both ::value and ::format(), and format strings for everything
else is accessible via ::format(). This makes it backwards compatible.
This allows exposing a dict-like interface to python code, allowing
iteration over keys via:
for k in custommapping:
...
while still allowing iteration over pairs, so that you can also
implement 'dict.items()' functionality which returns a pair iterator,
allowing:
for k, v in custommapping.items():
...
example-sequences-and-iterators is updated with a custom class providing
both types of iteration.
reference_internal requires an `instance` field to track the returned
reference's parent, but that's just a duplication of what
keep_alive<0,1> does, so use a keep alive to do this to eliminate the
duplication.
It was already pretty badly intrusive, but it also appears to make MSVC
segfault. Rather than investigating and fixing it, it's easier to just
remove it.
As discussed in #320.
The adds a documentation block that mentions that the trampoline classes
must provide overrides for both the classes' own virtual methods *and*
any inherited virtual methods. It also provides a templated solution to
avoiding method duplication.
The example includes a third method (only mentioned in the "see also"
section of the documentation addition), using multiple inheritance.
While this approach works, and avoids code generation in deep
hierarchies, it is intrusive by requiring that the wrapped classes use
virtual inheritance, which itself is more instrusive if any of the
virtual base classes need anything other than default constructors. As
per the discussion in #320, it is kept as an example, but not suggested
in the documentation.
Functions returning specialized Eigen matrices like Eigen::DiagonalMatrix and
Eigen::SelfAdjointView--which inherit from EigenBase but not
DenseBase--isn't currently allowed; such classes are explicitly copyable
into a Matrix (by definition), and so we can support functions that
return them by copying the value into a Matrix then casting that
resulting dense Matrix into a numpy.ndarray. This commit does exactly
that.
